Cant get to work pfsense on SuperMicro SYS-5018A-MLTN4



  • SuperMicro SYS-5018A-MLTN4
    http://www.supermicro.com/products/system/1u/5018/sys-5018a-mltn4.cfm
    after installing pfsense 2.2.4 it self-rebooted again and again without msg.
    ipcop etc on this server work carefuly



  • Where did you installed the pfSense 2.2.4?
    On a SSD or mSATA?

    And from where did you install the pfSense?
    From an USB Stick or CD?

    If you have a SSD/mSATA was the BIOS on AHCI mode?
    Did you try out full install of the pfSense?
    Did you change after the installation process the boot order in the BIOS?



  • @BlueKobold:

    Where did you installed the pfSense 2.2.4?
    On a SSD or mSATA?

    SATA2 HDD

    @BlueKobold:

    And from where did you install the pfSense?
    From an USB Stick or CD?

    from USB CD

    @BlueKobold:

    If you have a SSD/mSATA was the BIOS on AHCI mode?

    Yes

    @BlueKobold:

    Did you try out full install of the pfSense?

    full installation successful

    @BlueKobold:

    Did you change after the installation process the boot order in the BIOS?

    Yes, boot from hdd



  • But you was not trying out the yellow SATA port, or?
    I would try it out once more again with a SSD or USB Memstick NanoBSD.