X11SBA-LN4F vs A1SRi-2558F
-
I saw that too. Obviously a firmware issue with the controller causing the timeouts.
I wonder how long production on them will run before the issue gets fixed in the manufacturing process?
-
Side note…my board has now been up 35 days on 2.2.5 with NO issues. ZERO watchdog timeouts now.
I saw that too. Obviously a firmware issue with the controller causing the timeouts.
I wonder how long production on them will run before the issue gets fixed in the manufacturing process?
I was wondering the same. Don't know how many were in the supply chain before this was caught and SM seems content to ship them out defective and fix them IF the customer catches it (not always the case).
I just got the 2 port version and have the same issue with the 2nd port.
What hardware revision does your 2 port board have on it (1.01 on the 4 port version so far is all that I have seen)?
-
Just noticed a new firmware 1.0b is now available. Anyone want to try to see if it possibly solves this issue before sending the board back?
-
Just noticed a new firmware 1.0b is now available. Anyone want to try to see if it possibly solves this issue before sending the board back?
Is there a place to see what the BIOS revisions are? There has to be somewhere but I'm obviously not smart enough to find it on my own.
-
Just noticed a new firmware 1.0b is now available. Anyone want to try to see if it possibly solves this issue before sending the board back?
Is there a place to see what the BIOS revisions are? There has to be somewhere but I'm obviously not smart enough to find it on my own.
I've not been able to find any sort of change log at SM for any firmware.
-
Bios update didn't make any difference.
Time to RMA the board for repair.. -
I found this thread via Google, so i registered an account, because i have a similar Problem. I have a new X11SBA-LN4F, installed the newest pfSense build on it and configured (I switched from a X10SBA, because i Need Minimum 3 NICs). So far so good, but i have also These Watchdog timeouts. These occurs only on the igb2, which is my LAN Interface. I made some Tests and saw, that the timeout only occurs on heavy network load (LAN -> WAN / WAN -> LAN). Firmware and BIOS of my X11SBA-LN4F are also up2date. I bought this board 1 week ago.
Is the only solution to get it to work, to RMA this board? -
I found this thread via Google, so i registered an account, because i have a similar Problem. I have a new X11SBA-LN4F, installed the newest pfSense build on it and configured (I switched from a X10SBA, because i Need Minimum 3 NICs). So far so good, but i have also These Watchdog timeouts. These occurs only on the igb2, which is my LAN Interface. I made some Tests and saw, that the timeout only occurs on heavy network load (LAN -> WAN / WAN -> LAN). Firmware and BIOS of my X11SBA-LN4F are also up2date. I bought this board 1 week ago.
Is the only solution to get it to work, to RMA this board?Yes, appears to be a hardware issue. Talking to ldean, SuperMicro has stated that the board has been updated to hardware revision 1.02 and the remaining 1.01 boards were to be changed (ECO) to the same level via modification. Seems that they have not done them all yet if you have received one.
Is your hardware level 1.01?
-
Yes, appears to be a hardware issue. Talking to ldean, SuperMicro has stated that the board has been updated to hardware revision 1.02 and the remaining 1.01 boards were to be changed (ECO) to the same level via modification. Seems that they have not done them all yet if you have received one.
Is your hardware level 1.01?
Do i find the Revision number on the board itself? I will check that. The shop, which sells the board, have many pieces on stock, so i think this would be an older delivery. Then the only way is to send it back? If so, does this goes back directly to supermicro or via my Reseller?
-
Yes, appears to be a hardware issue. Talking to ldean, SuperMicro has stated that the board has been updated to hardware revision 1.02 and the remaining 1.01 boards were to be changed (ECO) to the same level via modification. Seems that they have not done them all yet if you have received one.
Is your hardware level 1.01?
Do i find the Revision number on the board itself? I will check that. The shop, which sells the board, have many pieces on stock, so i think this would be an older delivery. Then the only way is to send it back? If so, does this goes back directly to supermicro or via my Reseller?
Unless you can get your reseller to swap out to a 1.02 board, you'll need to get in contact with SuperMicro and request an RMA. You might open a tech support ticket up first and reference this thread as well as Ken Huang of SuperMicro. He should know the details by now.
-
I have some good and some bad news. First, i have read from another user with the same problem. He let change the board to the new revision, but he still has the same problems. They did not occur as many as before, but they ar present. He said, its because the cheap pci-e switch on the board. Thats the bad news.
Now the good news. On my pfsense, i have increased the mbuf size to one million, with 8gb ram that should not be a problem. I have did this last sunday evening, so 3 days before. Today i checked my logs (logging to external syslog server), and there was NO ONE entry about whatchdog timeout. Before the increase of the mbuf size, i had to wait only a few hours. I will see whats happen the next days.
-
I have some good and some bad news. First, i have read from another user with the same problem. He let change the board to the new revision, but he still has the same problems. They did not occur as many as before, but they ar present. He said, its because the cheap pci-e switch on the board. Thats the bad news.
Now the good news. On my pfsense, i have increased the mbuf size to one million, with 8gb ram that should not be a problem. I have did this last sunday evening, so 3 days before. Today i checked my logs (logging to external syslog server), and there was NO ONE entry about whatchdog timeout. Before the increase of the mbuf size, i had to wait only a few hours. I will see whats happen the next days.
My board would timeout between 1 hour and 4 days, depending on load. That is bad news about the board revision still doing it. My board has been up 50+ days since the correction with no timeouts.
-
Day 4 without any issue. I will check that for the next few days and will report here, but it seems to look not bad:)
-
After 13 days without any Watchdog timeout, i can say that the Problem is solved for me, by increasing the mbuf size to 1000000. I hope it stays stable:)
-
After 13 days without any Watchdog timeout, i can say that the Problem is solved for me, by increasing the mbuf size to 1000000. I hope it stays stable:)
Interesting. I had the same mbuf size of 1000000 and still had the watchdog timeouts. Regardless, up over 60 days since the board has been 'repaired' (whatever that means from SuperMicro).
-
Tomorrow i will install my new 500Mbit/s Cable Connection and make some Tests, hope there will be no Watchdog Timeouts. Does this Problem also occur on the A1SRi-2558F Board or is this only on the X11SBA-LN4F?
-
Tomorrow i will install my new 500Mbit/s Cable Connection and make some Tests, hope there will be no Watchdog Timeouts. Does this Problem also occur on the A1SRi-2558F Board or is this only on the X11SBA-LN4F?
I know it happens on the X11SBA-LN4F and X11SBA-F (from what I've read) but have saw nothing on the 2558F board.
-
Still watching this thread closely. This board is everything I'm looking for but if the timeout issue doesn't get resolved I won't go ahead with it.
Gonna have to wait for a bit anyway. Life gets in the way and we are on a spending moratorium until jr's medical bills stop rolling in. :-\
-
Ok after a lot of testing, the watchdog timeouts are still here :(. Is this problem related to the x64 platform? I havent tested the x86 version of pfsense on this board yet, but if no one with these problems have done it, i can test it.
-
Ok after a lot of testing, the watchdog timeouts are still here :(. Is this problem related to the x64 platform?
No. I'd try 2.3, the newer drivers may fix.
