Static IP Block - last virtual address unreachable.
-
I have a block of 5 static ip addresses:
75.xxx.xx.105/29 - 75.xxx.xx.109/29
I configured PFSense WAN at 75.xxx.xx.106 (105 is being used by our VOIP directly into the comcast modem and we have not yet moved it behind pfsense)
I set-up 3 virtual IPs for 107 - 109/29.
I set-up port-forwarding for the virtual IPs
Address 107 and 108 work great. For some reason, any rule I create for 75.xxx.xxx.109 does not work. It cannot be reached.
E.g.,
For term server:
If WAN Proto TCP Dest: 75.xxx/xxx.108 DestP 3389 NAT IP 10.0.1.5 NatP 3389Works great.
Change it to IP 109 (from the destination address drop-down) it fails to connect.
Every port I forward for IP 109 fails.. For 106-108 it all works great.
I cannot find any reason for this. Any suggestions?
Thanks
-
Use Packet Capture from pfSense Diagnostic menu to see if the packets attain the WAN interface at all.
-
What is the gateway for this /29
.104 would be the wire or network, so you would .105 through .110 as viable hosts with .111 being broadcast. So they gave you 5 of the six viable address is .110 the gateway?
