Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    No Internet No Nat No WAN HELP!!!!!

    Scheduled Pinned Locked Moved NAT
    3 Posts 2 Posters 1.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      devlin016
      last edited by

      so yesterday I tried going on my laptop and seen that there is no internet connection so i started going through the usual diagnostics checking if i can ping googles dns my wisps router and my own router but all pings failed except all local ips including pfsense.then i sshed into pfsense and tried pinging wisps router and googles dns and they were successfull. I even hooked up my wisps cat6 directly to my switch and then the internet worked. i was puzzled but i knew the problem had to be at the pfsense end. I check all my settings they were all correct. but the firewall log was empty and along with states they were empty aswell it was never like this before. please help me i cant go back to anything but pfsense

      Copyright © 1992-2014 The FreeBSD Project.
      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
      FreeBSD is a registered trademark of The FreeBSD Foundation.
      FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:37:21 CDT 2015
          root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wrap.10.i386 i386
      FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
      VT: running with driver "vga".
      CPU: Intel(R) Celeron(R) M processor        1300MHz (1300.08-MHz 686-class CPU)
        Origin = "GenuineIntel"  Id = 0x695  Family = 0x6  Model = 0x9  Stepping = 5
        Features=0xa7e9fbbf <fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>real memory  = 1072627712 (1022 MB)
      avail memory = 1015791616 (968 MB)
      Event timer "LAPIC" quality 400
      ACPI APIC Table: <intelr awrdacpi="">ioapic0 <version 2.0="">irqs 0-23 on motherboard
      ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_bss_fw, 0xc080ef30, 0) error 1
      ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc080efe0, 0) error 1
      ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc080f090, 0) error 1
      wlan: mac acl policy registered
      kbd1 at kbdmux0
      random: <software, yarrow="">initialized
      cryptosoft0: <software crypto="">on motherboard
      padlock0: No ACE support.
      acpi0: <intelr awrdacpi="">on motherboard
      acpi0: Power Button (fixed)
      acpi0: reservation of a2, 1e (4) failed
      acpi0: reservation of e0, 10 (4) failed
      acpi0: reservation of 0, a0000 (3) failed
      acpi0: reservation of 100000, 3fdf0000 (3) failed
      cpu0: <acpi cpu="">on acpi0
      attimer0: <at timer="">port 0x40-0x43 irq 0 on acpi0
      Timecounter "i8254" frequency 1193182 Hz quality 0
      Event timer "i8254" frequency 1193182 Hz quality 100
      atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
      Event timer "RTC" frequency 32768 Hz quality 0
      Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
      acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
      acpi_button0: <power button="">on acpi0
      pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
      pci0: <acpi pci="" bus="">on pcib0
      vgapci0: <vga-compatible display="">port 0xea00-0xea07 mem 0xd0500000-0xd057ffff,0xc0000000-0xcfffffff,0xd0580000-0xd05bffff irq 16 at device 2.0 on pci0
      agp0: <intel 82915gm="" (915gm="" gmch)="" svga="" controller="">on vgapci0
      agp0: aperture size is 256M, detected 764k stolen memory
      vgapci0: Boot video device
      pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
      pci1: <acpi pci="" bus="">on pcib1
      mskc0: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x8000-0x80ff mem 0xd0020000-0xd0023fff irq 16 at device 0.0 on pci1
      msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc0
      miibus0: <mii bus="">on msk0
      e1000phy0: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus0
      e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
      pcib2: <acpi pci-pci="" bridge="">irq 17 at device 28.1 on pci0
      pci2: <acpi pci="" bus="">on pcib2
      mskc1: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x9000-0x90ff mem 0xd0120000-0xd0123fff irq 17 at device 0.0 on pci2
      msk1: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc1
      miibus1: <mii bus="">on msk1
      e1000phy1: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus1
      e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
      pcib3: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0
      pci3: <acpi pci="" bus="">on pcib3
      mskc2: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xa000-0xa0ff mem 0xd0220000-0xd0223fff irq 18 at device 0.0 on pci3
      msk2: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc2
      miibus2: <mii bus="">on msk2
      e1000phy2: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus2
      e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
      pcib4: <acpi pci-pci="" bridge="">irq 19 at device 28.3 on pci0
      pci4: <acpi pci="" bus="">on pcib4
      mskc3: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xb000-0xb0ff mem 0xd0320000-0xd0323fff irq 19 at device 0.0 on pci4
      msk3: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc3
      miibus3: <mii bus="">on msk3
      e1000phy3: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus3
      e1000phy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
      uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a="">port 0xeb00-0xeb1f irq 23 at device 29.0 on pci0
      usbus0 on uhci0
      uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b="">port 0xed00-0xed1f irq 19 at device 29.1 on pci0
      usbus1 on uhci1
      uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c="">port 0xe800-0xe81f irq 18 at device 29.2 on pci0
      usbus2 on uhci2
      uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d="">port 0xe900-0xe91f irq 16 at device 29.3 on pci0
      usbus3 on uhci3
      ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller="">mem 0xd05c0000-0xd05c03ff irq 23 at device 29.7 on pci0
      usbus4: EHCI version 1.0
      usbus4 on ehci0
      pcib5: <acpi pci-pci="" bridge="">at device 30.0 on pci0
      pci5: <acpi pci="" bus="">on pcib5
      skc0: <marvell gigabit="" ethernet="">port 0xc000-0xc0ff mem 0xd042c000-0xd042ffff irq 16 at device 0.0 on pci5
      skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
      sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0
      miibus4: <mii bus="">on sk0
      e1000phy4: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus4
      e1000phy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      skc1: <marvell gigabit="" ethernet="">port 0xc400-0xc4ff mem 0xd0420000-0xd0423fff irq 17 at device 1.0 on pci5
      skc1: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
      sk1: <marvell semiconductor,="" inc.="" yukon="">on skc1
      miibus5: <mii bus="">on sk1
      e1000phy5: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus5
      e1000phy5:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      skc2: <marvell gigabit="" ethernet="">port 0xc800-0xc8ff mem 0xd0424000-0xd0427fff irq 18 at device 2.0 on pci5
      skc2: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
      sk2: <marvell semiconductor,="" inc.="" yukon="">on skc2
      miibus6: <mii bus="">on sk2
      e1000phy6: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus6
      e1000phy6:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      skc3: <marvell gigabit="" ethernet="">port 0xcc00-0xccff mem 0xd0428000-0xd042bfff irq 19 at device 3.0 on pci5
      skc3: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
      sk3: <marvell semiconductor,="" inc.="" yukon="">on skc3
      miibus7: <mii bus="">on sk3
      e1000phy7: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus7
      e1000phy7:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
      pci5: <encrypt decrypt,="" network="" computer="" crypto="">at device 4.0 (no driver attached)
      isab0: <pci-isa bridge="">at device 31.0 on pci0
      isa0: <isa bus="">on isab0
      atapci0: <intel ich6="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
      ata0: <ata channel="">at channel 0 on atapci0
      ata1: <ata channel="">at channel 1 on atapci0
      acpi_tz0: <thermal zone="">on acpi0
      uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
      uart0: console (9600,n,8,1)
      uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
      ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
      ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
      ppbus0: <parallel port="" bus="">on ppc0
      lpt0: <printer>on ppbus0
      lpt0: Interrupt-driven port
      ppi0: <parallel i="" o="">on ppbus0
      pmtimer0 on isa0
      orm0: <isa option="" rom="">at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
      atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
      atkbd0: <at keyboard="">irq 1 on atkbdc0
      kbd0 at atkbd0
      atkbd0: [GIANT-LOCKED]
      Timecounters tick every 1.000 msec
      IPsec: Initialized Security Association Processing.
      random: unblocking device.
      usbus0: 12Mbps Full Speed USB v1.0
      usbus1: 12Mbps Full Speed USB v1.0
      ugen0.1: <intel>at usbus0
      uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
      ugen1.1: <intel>at usbus1
      uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
      usbus2: 12Mbps Full Speed USB v1.0
      usbus3: 12Mbps Full Speed USB v1.0
      ugen2.1: <intel>at usbus2
      uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
      ugen3.1: <intel>at usbus3
      uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
      usbus4: 480Mbps High Speed USB v2.0
      ugen4.1: <intel>at usbus4
      uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
      uhub0: 2 ports with 2 removable, self powered
      ada0 at ata0 bus 0 scbus0 target 0 lun 0
      ada0: <cf 20140121="" card="">ATA-0uhub1: 2 ports with 2 removable, self powered
      device
      ada0: Serial Number AA000000000003098025
      ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)
      ada0: 3831MB (7847280 512 byte sectors: 16H 63S/T 7785C)
      uhub3: 2 ports with 2 removable, self powered
      uhub2: 2 ports with 2 removable, self powered
      ada0: Previously was known as ad0
      Timecounter "TSC" frequency 1300075803 Hz quality 800
      Root mount waiting for: usbus4
      Root mount waiting for: usbus4
      Root mount waiting for: usbus4
      uhub4: 8 ports with 8 removable, self powered
      Trying to mount root from ufs:/dev/ufs/pfsense1 [ro,sync,noatime]…
      msk0: link state changed to UP
      msk0: link state changed to DOWN
      msk0: link state changed to UP
      sk0: link state changed to DOWN
      msk1: link state changed to DOWN
      sk0: link state changed to UP
      tun3: changing name to 'ovpns3'
      tun6: changing name to 'ovpns6'
      ovpns3: link state changed to UP
      nd6_setmtu0: new link MTU on ovpns3 (1254) is too small for IPv6
      tun1: changing name to 'ovpnc1'
      ovpns6: link state changed to UP
      nd6_setmtu0: new link MTU on ovpns6 (1254) is too small for IPv6
      tun2: changing name to 'ovpnc2'
      pflog0: promiscuous mode enabled
      DUMMYNET 0 with IPv6 initialized (100409)
      load_dn_sched dn_sched FIFO loaded
      load_dn_sched dn_sched QFQ loaded
      load_dn_sched dn_sched RR loaded
      load_dn_sched dn_sched WF2Q+ loaded
      load_dn_sched dn_sched PRIO loaded
      ovpnc2: link state changed to UP
      sk1: link state changed to DOWN
      sk2: link state changed to DOWN
      sk3: link state changed to DOWN
      ovpnc1: link state changed to UP</cf></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></at></keyboard></isa></parallel></printer></parallel></parallel></thermal></ata></ata></intel></isa></pci-isa></encrypt></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></acpi></acpi></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></acpi></acpi></marvell></mii></marvell></marvell></acpi></acpi></marvell></mii></marvell></marvell></acpi></acpi></marvell></mii></marvell></marvell></acpi></acpi></intel></vga-compatible></acpi></acpi></power></at></at></acpi></intelr></software></software,></version></intelr></fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>

      Sep 17 14:25:59 sshlockout[51128]: sshlockout/webConfigurator v3.0 starting up
      Sep 17 14:25:59 php-fpm[29557]: /index.php: Successful login for user 'admin' from: 10.0.1.22
      Sep 17 14:25:59 php-fpm[29557]: /index.php: Successful login for user 'admin' from: 10.0.1.22
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Gateways status could not be determined, considering all as up/active. (Group: Domain_Updating)
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Gateways status could not be determined, considering all as up/active. (Group: Media_VPN)
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Gateways status could not be determined, considering all as up/active. (Group: Client)
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Gateways status could not be determined, considering all as up/active. (Group: DNS)
      Sep 17 14:23:25 php-fpm[11499]: /rc.filter_configure_sync: Gateways status could not be determined, considering all as up/active. (Group: VPN)
      Sep 17 14:23:25 php-fpm[11499]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use EZVPN_VPNV4.
      Sep 17 14:23:25 php-fpm[11499]: /rc.dyndns.update: MONITOR: EZVPN_VPNV4 is down, omitting from routing group Media_VPN
      Sep 17 14:23:25 php-fpm[11499]: /rc.dyndns.update: MONITOR: EZVPN_VPNV4 is down, omitting from routing group Client
      Sep 17 14:23:25 php-fpm[11499]: /rc.dyndns.update: MONITOR: EZVPN_VPNV4 is down, omitting from routing group VPN
      Sep 17 14:23:24 check_reload_status: Reloading filter
      Sep 17 14:23:24 check_reload_status: Restarting OpenVPN tunnels/interfaces
      Sep 17 14:23:24 check_reload_status: Restarting ipsec tunnels
      Sep 17 14:23:24 check_reload_status: updating dyndns EZVPN_VPNV4
      Sep 17 14:23:06 LCDd: Connect from host 127.0.0.1:21514 on socket 12
      Sep 17 14:23:05 php: lcdproc: Start client procedure. Error counter: (0)
      Sep 17 14:23:04 LCDd: Listening for queries on 127.0.0.1:13666
      Sep 17 14:23:04 LCDd: Using Configuration File: /usr/pbi/lcdproc-i386/local/etc/LCDd.conf
      Sep 17 14:23:04 LCDd: LCDd version 0.5.7 starting
      Sep 17 14:23:03 LCDd: Server shutting down on SIGTERM
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: sock_send: socket write error
      Sep 17 14:23:02 LCDd: Client on socket 12 disconnected
      Sep 17 14:23:01 php-fpm[59636]: /rc.start_packages: Restarting/Starting all packages.
      Sep 17 14:23:00 check_reload_status: Starting packages
      Sep 17 14:23:00 php-fpm[94761]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 0.0.0.0 -> 10.8.0.134 - Restarting packages.
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: Creating rrd update script
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: Removing static route for monitor 208.67.222.222 and adding a new route through 10.200.100.7
      Sep 17 14:22:58 php-fpm[94761]: /rc.newwanip: Removing static route for monitor 208.67.220.220 and adding a new route through 10.8.0.133
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:22:51 php-fpm[94761]: /rc.newwanip: Gateways status could not be determined, considering all as up/active. (Group: Domain_Updating)
      Sep 17 14:22:50 php-fpm[94761]: /rc.newwanip: IP has changed, killing states on former IP 0.0.0.0.
      Sep 17 14:22:50 php-fpm[94761]: /rc.newwanip: rc.newwanip: on (IP address: 10.8.0.134) (interface: 143VPN[opt3]) (real interface: ovpnc1).
      Sep 17 14:22:50 php-fpm[94761]: /rc.newwanip: rc.newwanip: Info: starting on ovpnc1.
      Sep 17 14:22:49 check_reload_status: rc.newwanip starting ovpnc1
      Sep 17 14:22:49 kernel: ovpnc1: link state changed to UP
      Sep 17 14:22:11 check_reload_status: Linkup starting sk3
      Sep 17 14:22:11 check_reload_status: Linkup starting sk2
      Sep 17 14:22:11 check_reload_status: Linkup starting sk1
      Sep 17 14:22:11 kernel: sk3: link state changed to DOWN
      Sep 17 14:22:11 kernel: sk2: link state changed to DOWN
      Sep 17 14:22:11 kernel: sk1: link state changed to DOWN
      Sep 17 14:19:38 php-fpm[288]: /rc.dyndns.update: DynDNS () There was an error trying to determine the public IP for interface - opt1(msk1). Probably interface is not a WAN interface.
      Sep 17 14:19:38 php-fpm[288]: /rc.dyndns.update: DynDNS (): running get_failover_interface for opt1. found msk1
      Sep 17 14:19:38 php-fpm[288]: /rc.dyndns.update: DynDns: updatedns() starting
      Sep 17 14:18:13 LCDd: Connect from host 127.0.0.1:51357 on socket 12
      Sep 17 14:18:12 php: lcdproc: Start client procedure. Error counter: (0)
      Sep 17 14:18:12 LCDd: Listening for queries on 127.0.0.1:13666
      Sep 17 14:18:12 LCDd: Using Configuration File: /usr/pbi/lcdproc-i386/local/etc/LCDd.conf
      Sep 17 14:18:12 LCDd: LCDd version 0.5.7 starting
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:12 php-fpm[94761]: /rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:18:11 php-fpm[94761]: /rc.filter_configure_sync: Gateways status could not be determined, considering all as up/active. (Group: Domain_Updating)
      Sep 17 14:18:10 php-fpm[54959]: /rc.start_packages: Restarting/Starting all packages.
      Sep 17 14:18:10 kernel: done.
      Sep 17 14:18:10 syslogd: kernel boot file is /boot/kernel/kernel
      Sep 17 14:18:10 syslogd: exiting on signal 15
      Sep 17 14:18:09 kernel: done.
      Sep 17 14:18:09 kernel: done.
      Sep 17 14:18:09 php: rc.bootup: miniupnpd: Starting service on interface: lan
      Sep 17 14:18:09 php: rc.bootup: Creating rrd update script
      Sep 17 14:18:09 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt3-queuedrops.rrd -t N' returned exit code '1', the output was 'ERROR: Not enough arguments'
      Sep 17 14:18:09 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt3-queues.rrd -t N' returned exit code '1', the output was 'ERROR: Not enough arguments'
      Sep 17 14:18:09 php: rc.bootup: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:18:09 php: rc.bootup: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:18:09 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt2-queuedrops.rrd -t N' returned exit code '1', the output was 'ERROR: Not enough arguments'
      Sep 17 14:18:09 php: rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/opt2-queues.rrd -t N' returned exit code '1', the output was 'ERROR: Not enough arguments'
      Sep 17 14:18:09 php: rc.bootup: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:18:09 php: rc.bootup: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
      Sep 17 14:17:52 kernel: pfctl: Table does not exist.
      Sep 17 14:17:49 kernel: ..
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:49 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:48 kernel: .
      Sep 17 14:17:48 kernel: .
      Sep 17 14:17:48 kernel: Configuring firewall.
      Sep 17 14:17:48 check_reload_status: Updating all dyndns
      Sep 17 14:17:48 dhcpleases: kqueue error: unkown
      Sep 17 14:17:47 kernel: done.
      Sep 17 14:17:47 dhcpleases: Could not deliver signal HUP to process because its pidfile (/var/run/dnsmasq.pid) does not exist, No such file or directory.
      Sep 17 14:17:47 kernel: done.
      Sep 17 14:17:47 php: rc.bootup: ROUTING: setting default route to 10.101.128.1
      Sep 17 14:17:46 kernel: done.
      Sep 17 14:17:35 kernel: done.
      Sep 17 14:17:33 php: rc.bootup: Removing static route for monitor 208.67.222.222 and adding a new route through 10.200.100.7
      Sep 17 14:17:32 php-fpm[288]: /rc.newwanip: rc.newwanip: Info: starting on ovpnc2.
      Sep 17 14:17:31 check_reload_status: rc.newwanip starting ovpnc2
      Sep 17 14:17:31 kernel: ovpnc2: link state changed to UP
      Sep 17 14:17:31 kernel:
      Sep 17 14:17:30 kernel: ..
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt3).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt2).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt2).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 php: rc.bootup: Could not find IPv4 gateway for interface (opt1).
      Sep 17 14:17:30 kernel: load_dn_sched dn_sched PRIO loaded
      Sep 17 14:17:30 kernel: load_dn_sched dn_sched WF2Q+ loaded
      Sep 17 14:17:30 kernel: load_dn_sched dn_sched RR loaded
      Sep 17 14:17:30 kernel: load_dn_sched dn_sched QFQ loaded
      Sep 17 14:17:30 kernel: load_dn_sched dn_sched FIFO loaded
      Sep 17 14:17:30 kernel: DUMMYNET 0 with IPv6 initialized (100409)
      Sep 17 14:17:30 kernel: .
      Sep 17 14:17:29 php-fpm[288]: /rc.newwanip: rc.newwanip: Info: starting on ovpns6.
      Sep 17 14:17:29 php-fpm[288]: /rc.newwanip: rc.newwanip: Info: starting on ovpns3.
      Sep 17 14:17:28 kernel: pflog0: promiscuous mode enabled
      Sep 17 14:17:27 check_reload_status: rc.newwanip starting ovpns6
      Sep 17 14:17:27 check_reload_status: rc.newwanip starting ovpns3
      Sep 17 14:17:27 kernel: tun2: changing name to 'ovpnc2'
      Sep 17 14:17:27 kernel: nd6_setmtu0: new link MTU on ovpns6 (1254) is too small for IPv6
      Sep 17 14:17:27 kernel: ovpns6: link state changed to UP
      Sep 17 14:17:27 kernel: tun1: changing name to 'ovpnc1'
      Sep 17 14:17:27 kernel: nd6_setmtu0: new link MTU on ovpns3 (1254) is too small for IPv6
      Sep 17 14:17:27 kernel: ovpns3: link state changed to UP
      Sep 17 14:17:27 kernel: tun6: changing name to 'ovpns6'
      Sep 17 14:17:27 kernel: tun3: changing name to 'ovpns3'
      Sep 17 14:17:27 kernel:
      Sep 17 14:17:27 php: rc.bootup: Resyncing OpenVPN instances.
      Sep 17 14:17:27 php: rc.bootup: The command '/sbin/dhclient -c /var/etc/dhclient_opt1.conf msk1 > /tmp/msk1_output 2> /tmp/msk1_error_output' returned exit code '1', the output was ''
      Sep 17 14:17:19 kernel: sk0: link state changed to UP
      Sep 17 14:17:19 check_reload_status: Linkup starting sk0
      Sep 17 14:17:17 php-fpm[288]: /rc.newwanip: rc.newwanip: Info: starting on msk0.
      Sep 17 14:17:16 kernel: msk1: link state changed to DOWN
      Sep 17 14:17:16 check_reload_status: Linkup starting msk1
      Sep 17 14:17:16 kernel: sk0: link state changed to DOWN
      Sep 17 14:17:16 check_reload_status: Linkup starting sk0
      Sep 17 14:17:16 check_reload_status: rc.newwanip starting msk0
      Sep 17 14:17:13 kernel: msk0: link state changed to UP
      Sep 17 14:17:13 check_reload_status: Linkup starting msk0
      Sep 17 14:17:13 sshlockout[8301]: sshlockout/webConfigurator v3.0 starting up
      Sep 17 14:17:13 sshd[8145]: Server listening on 0.0.0.0 port 22.
      Sep 17 14:17:13 sshd[8145]: Server listening on :: port 22.
      Sep 17 14:17:11 kernel: msk0: link state changed to DOWN
      Sep 17 14:17:11 kernel: msk0: link state changed to UP
      Sep 17 14:17:11 kernel: done.
      Sep 17 14:17:11 check_reload_status: Linkup starting msk0
      Sep 17 14:17:11 kernel: done.
      Sep 17 14:17:11 kernel: Trying to mount root from ufs:/dev/ufs/pfsense1 [ro,sync,noatime]…
      Sep 17 14:17:11 kernel: uhub4: 8 ports with 8 removable, self powered

      1 Reply Last reply Reply Quote 0
      • D
        devlin016
        last edited by

        fixed my problem after i ran pfctl -f /tmp/rules.debug in a terminal and read the debug output. I had a alias get a list of usa IP address and the website it came from doesnt exist anymore its just some advertisement page now but pfsense was grabbing some of the pages html code for the alias and it was causing my rules not to load fixed the alias and everything started working again. very relieved

        1 Reply Last reply Reply Quote 0
        • BBcan177B
          BBcan177 Moderator
          last edited by

          You can use the package pfBlockerNG for that.

          "Experience is something you don't get until just after you need it."

          Website: http://pfBlockerNG.com
          Twitter: @BBcan177  #pfBlockerNG
          Reddit: https://www.reddit.com/r/pfBlockerNG/new/

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.