OpenVPN on dual WAN - cannot reach clients
got a problem with OpenVPN. Hope somebody can point me into the right direction.
I have pfsense 2.2.4 setup with Dual WAN (2 seperate providers) for failover and loadbalance. That is working great.
I also have setup OpenVPN, and I can connect and establish a connection on both WAN connections.
OpenVPN setup for "Interface" is "localhost".
Than I forward the UDP connection on each WAN to "localhost or 127.0.0.1".
This was the only way I could get OpenVPN setup to work on both WAN interfaces and this is the recommended setup here on the forum.
Now, I can ping the pfsense box (172.24.0.1) no problem, but, I cannot ping any other clients. I am trying to get RDP working, but a simple ping does also not work.
What am I missing?
probably firewall rules or routes or both.
Hope the attached pictures help.
![VPN Interface.PNG](/public/imported_attachments/1/VPN Interface.PNG)
![VPN Interface.PNG_thumb](/public/imported_attachments/1/VPN Interface.PNG_thumb)
rules seem ok
must be routes then … show pics of the vpn config for more insight pls
I hope the pictures help. I dont know howto get the text version of the OpenVPN Server config.
If you can tell me where to find it, I can upload that as well.
you don't need to push your tunnel network, you need to push you lan network
I removed the push to Tunnel network and added:
push "route 172.24.0.0 255.255.0.0";
But it did not solve my problem.
It seems to me, that the Tunnel is going to localhost, but is stuck there and cannot reach the LAN. I can connect via VPN on both WAN interfaces and access the pfsense box web interface and access the internet, but not the LAN.
do the routes show up in the routing tables on the clients ?
How can I check that?
see picture of routing table.
As far as I can tell, the route does show up properly.
![Routing Table.PNG](/public/imported_attachments/1/Routing Table.PNG)
![Routing Table.PNG_thumb](/public/imported_attachments/1/Routing Table.PNG_thumb)
yes but you are having a route for 2 subnets ??
a /16 one and a /24 both pointing towards 172.24.0.0 …. why is that ?
I noticed that as well and removed it already. It was, because of the push entry that was pointing to /16. i changed it to /24. Now it only shows one route to 172.24.0.0 /24.
anybody have any further ideas? This is still not working, but I cannot find the issue. All settings look fine.