Squid crashing to the point clients cant browse
-
Oct 27 21:23:45 kernel: pid 42578 (squid), uid 62: exited on signal 6
Oct 27 21:23:45 squid[42232]: Squid Parent: child process 42578 exited due to signal 6
Oct 27 21:23:45 squid[42578]: The url_rewriter helpers are crashing too rapidly, need help!
Oct 27 21:23:44 squid[42232]: Squid Parent: child process 42578 started
Oct 27 21:23:43 Squid_Alarm[38184]: Attempting restart…
Oct 27 21:23:43 Squid_Alarm[37897]: Squid has exited. Reconfiguring filter.
Oct 27 21:23:04 squid[88255]: Exiting due to repeated, frequent failures
Oct 27 21:23:04 squid[88255]: Squid Parent: child process 87291 exited due to signal 6
Oct 27 21:23:04 kernel: pid 87291 (squid), uid 62: exited on signal 6
Oct 27 21:23:04 squid[87291]: The url_rewriter helpers are crashing too rapidly, need help!
Oct 27 21:23:03 squid[88255]: Squid Parent: child process 87291 started
Oct 27 21:23:00 kernel: pid 35755 (squid), uid 62: exited on signal 6
Oct 27 21:23:00 squid[88255]: Squid Parent: child process 35755 exited due to signal 6
Oct 27 21:23:00 squid[35755]: The url_rewriter helpers are crashing too rapidly, need help!
Oct 27 21:22:58 squid[88255]: Squid Parent: child process 35755 started
Oct 27 21:22:55 kernel: pid 91093 (squid), uid 62: exited on signal 6
Oct 27 21:22:55 squid[88255]: Squid Parent: child process 91093 exited due to signal 6
Oct 27 21:22:55 squid[91093]: The url_rewriter helpers are crashing too rapidly, need help!
Oct 27 21:22:54 squid[88255]: Squid Parent: child process 91093 started
Oct 27 21:22:50 kernel: pid 38007 (squid), uid 62: exited on signal 6
Oct 27 21:22:50 squid[88255]: Squid Parent: child process 38007 exited due to signal 6
Oct 27 21:22:50 squid[38007]: The url_rewriter helpers are crashing too rapidly, need help!
Oct 27 21:22:49 squid[88255]: Squid Parent: child process 38007 started
Oct 27 21:22:48 check_reload_status: Reloading filter -
Your problem is likely with squidGuard and not Squid.
-
Might also be useful.
http://lists.freebsd.org/pipermail/freebsd-questions/2004-April/042665.htmland this one.
-
Might also be useful.
http://lists.freebsd.org/pipermail/freebsd-questions/2004-April/042665.htmland this one.
i did followed it which basically cleared cache. will report back if problem arises.
-
Clearing the cache won't help if the problem is squidGuard, which it appears to be since the errors are all coming from the URL rewriters, which is squidGuard.
-
@KOM:
Clearing the cache won't help if the problem is squidGuard, which it appears to be since the errors are all coming from the URL rewriters, which is squidGuard.
yes i found exact problem
i tried both squid and squid3 and both affected by this problem
when i enable squidfilter and use urlfitler blacklist.. and reboot pfsense … both squid and squidguard would be down. and i cannot run any of them regrardless whether i start squid or squidfilter first.but as soon i REDOWNLOAD the urls in blacklist table and it finishes both services automatically startup..
seems the url downloaded are lost after reboot. .. ?
-
seems the url downloaded are lost after reboot. .. ?
- Stop running this on nanobsd
- Or, stop enabling /var and /tmp ramdisks!!!
-
seems the url downloaded are lost after reboot. .. ?
- Stop running this on nanobsd
- Or, stop enabling /var and /tmp ramdisks!!!
this is not nanobsd.. this is inside a hypervisor running in vmware on dell optiplex 755 c2d 2.33 and 12GB ram..
also /var and /tmp ramdisk disabled as per gui.when i go to System: Advanced: Miscellaneous > under heading RAM Disk Settings (Reboot to Apply Changes) …
below option is unchecked.
Use memory file system for /tmp and /varFreeBSD pfSense.****.net 10.1-RELEASE-p15 FreeBSD 10.1-RELEASE-p15 #0 c5ab052(releng/10.1)-dirty: Sat Jul 25 20:20:58 CDT 2015 root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64 -
am i doing something wrong ? :-\
-
am i doing something wrong ? :-\
please help .. also why is the uname command showing dirty ?
