Did i miss something?
-
I'm giving up :-
Have a look at this config with fresh eye.
pinging 9.2 responds are normal. Ping to 9.1 no reply..
other VIPs responds as should befxp0_vlan100: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
ether 00:d0:b7:0c:42:ab
inet6 fe80::2d0:b7ff:fe0c:42ab%fxp0_vlan100 prefixlen 64 scopeid 0x8
inet 192.168.9.2 netmask 0xffffff00 broadcast 192.168.9.255
inet 192.168.9.1 netmask 0xffffff00 broadcast 192.168.9.255 vhid 7
nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 100 vlanpcp: 0 parent interface: fxp0
carp: MASTER vhid 7 advbase 1 advskew 10</full-duplex></performnud,auto_linklocal></up,broadcast,running,promisc,simplex,multicast>[2.2.2-RELEASE][admin@gate.vv.net]/root: tcpdump -i fxp0_vlan100 'icmp[icmptype] = icmp-echo'
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on fxp0_vlan100, link-type EN10MB (Ethernet), capture size 65535 bytes
00:53:04.735510 IP 192.168.9.100 > 192.168.9.1: ICMP echo request, id 2818, seq 2048, length 30
00:53:05.773816 IP 192.168.9.100 > 192.168.9.1: ICMP echo request, id 2818, seq 2304, length 30
^C
2 packets captured
45 packets received by filter
0 packets dropped by kernel
[2.2.2-RELEASE][admin@gate.vv.net]/root: tcpdump -i fxp0_vlan100 'icmp[icmptype] = icmp-echoreply'
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on fxp0_vlan100, link-type EN10MB (Ethernet), capture size 65535 bytes
^C
0 packets captured
29 packets received by filter
0 packets dropped by kernel@224(1445988576) pass in log quick on fxp0_vlan100 inet all flags S/SA keep state label "USER_RULE: xxx"
[ Evaluations: 3034 Packets: 457 Bytes: 89342 States: 0 ]
[ Inserted: pid 22938 State Creations: 18446735278592963064]