PfSense SSD Smart Info Errors



  • HI, All

    Got some errors after using S.M.A.R.T monitor tool, any one knows what the below errors mean:

    Error 318 occurred at disk power-on lifetime: 320 hours (13 days + 8 hours)
      When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      – -- -- -- -- -- --
      40 c3 40 78 c7 53 00  Error:

    Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      ef 03 40 78 c7 53 00 60      00:00:04.302  SET FEATURES [Set transfer mode]
      ef 02 40 78 c7 53 00 60      00:00:04.174  SET FEATURES [Enable write cache]
      ef 02 00 78 c7 53 40 00      00:00:03.174  SET FEATURES [Enable write cache]
      ef 03 00 78 c7 53 40 00      00:00:03.174  SET FEATURES [Set transfer mode]
      c6 00 00 78 c7 53 40 00      00:00:03.174  SET MULTIPLE MODE

    Error 317 occurred at disk power-on lifetime: 320 hours (13 days + 8 hours)
      When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      – -- -- -- -- -- --
      40 c3 40 78 c7 53 00  Error:

    Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      ef 02 40 78 c7 53 00 60      00:00:04.174  SET FEATURES [Enable write cache]
      ef 02 00 78 c7 53 40 00      00:00:03.174  SET FEATURES [Enable write cache]
      ef 03 00 78 c7 53 40 00      00:00:03.174  SET FEATURES [Set transfer mode]
      c6 00 00 78 c7 53 40 00      00:00:03.174  SET MULTIPLE MODE
      ef 03 40 78 c7 53 00 60      00:00:03.044  SET FEATURES [Set transfer mode]

    Error 316 occurred at disk power-on lifetime: 320 hours (13 days + 8 hours)
      When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      – -- -- -- -- -- --
      40 c3 40 78 c7 53 00  Error:

    Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      ef 03 40 78 c7 53 00 60      00:00:03.044  SET FEATURES [Set transfer mode]
      ef 02 40 78 c7 53 00 60      00:00:02.915  SET FEATURES [Enable write cache]
      ef 02 40 78 c7 53 00 60      00:00:02.786  SET FEATURES [Enable write cache]
      ef 03 40 78 c7 53 00 60      00:00:02.658  SET FEATURES [Set transfer mode]
      c6 00 40 78 c7 53 00 60      00:00:02.530  SET MULTIPLE MODE

    Error 315 occurred at disk power-on lifetime: 320 hours (13 days + 8 hours)
      When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      – -- -- -- -- -- --
      40 c3 40 78 c7 53 00  Error:

    Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      ef 02 40 78 c7 53 00 60      00:00:02.915  SET FEATURES [Enable write cache]
      ef 02 40 78 c7 53 00 60      00:00:02.786  SET FEATURES [Enable write cache]
      ef 03 40 78 c7 53 00 60      00:00:02.658  SET FEATURES [Set transfer mode]
      c6 00 40 78 c7 53 00 60      00:00:02.530  SET MULTIPLE MODE
      ef 03 40 78 c7 53 00 60      00:00:02.402  SET FEATURES [Set transfer mode]

    Error 314 occurred at disk power-on lifetime: 320 hours (13 days + 8 hours)
      When the command that caused the error occurred, the device was active or idle.

    After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      – -- -- -- -- -- --
      40 c3 40 78 c7 53 00  Error:

    Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      ef 02 40 78 c7 53 00 60      00:00:02.786  SET FEATURES [Enable write cache]
      ef 03 40 78 c7 53 00 60      00:00:02.658  SET FEATURES [Set transfer mode]
      c6 00 40 78 c7 53 00 60      00:00:02.530  SET MULTIPLE MODE
      ef 03 40 78 c7 53 00 60      00:00:02.402  SET FEATURES [Set transfer mode]
      ef 02 40 78 c7 53 00 60      00:00:02.273  SET FEATURES [Enable write cache]

    Does it indicates that my SSD is not good, need to be replaced?


Log in to reply