RIP is not working between pfsense and ddwrt



  • hi
    i have below configuration and rip is not working..
    pfsense wan is in using ppoe and geting live ip .. its lan is connected to wan of ddwrt.
    there are 4 wifi subnets on pfsense and 1 lan subnet
    on ddwrt there is one wan subnet which is same as pfsense wired lan
    and one wifi+lan subnet (for lan ) on ddwrt ..

    i want the routing table to be converged so all networks are known to each other.

    on pfsense all (inclusing Wan)  except the local loopback are selected for rip.
    in ddwrt both wan/lan are selected for rip.
    but routing is nto working..
    from ddwrt i cannot ping any of the subnet on pfsense nor can ping outside ip (i also added a nat entry for 192.168.1.0/24 subnet on pfsense )

    Also in cisco we have a lot of troubleshooting command for rip . i do not see it in pfsense gui ? are there some commands lines ?


    ![rip settings on pfsense.PNG](/public/imported_attachments/1/rip settings on pfsense.PNG)
    ![rip settings on pfsense.PNG_thumb](/public/imported_attachments/1/rip settings on pfsense.PNG_thumb)


    ![ddwrt routing table when rip is enabled.PNG](/public/imported_attachments/1/ddwrt routing table when rip is enabled.PNG)
    ![ddwrt routing table when rip is enabled.PNG_thumb](/public/imported_attachments/1/ddwrt routing table when rip is enabled.PNG_thumb)


Log in to reply