Routing through IPSec tunnel

[Der-Tim]

Hi there,

I'm currently using something like a star-setup for IPSec tunnels between branches and the headquarter. The communication between each branch and the hq works very well, but routing between two branches using the hq as a static route doesn't work.

HQ Subnet: 10.0.0.0/24
Branch 1 Subnet: 10.1.0.0/24
Branch 2 Subnet: 10.2.0.0/24

Static Routes:
HQ: None, routes are set upon initiating the IPSec tunnel.
Branch 1: 10.2.0.0/24 via 10.0.0.1 (IF: LAN)
Branch 2: 10.1.0.0/24 via 10.0.0.1 (IF: LAN)

But this doesn't work, even if all traffic is allowed on IPSec interface firewall configuration…

Any ideas?

Thanks, Tim

[heiko]

please take a look…..

http://forum.pfsense.org/index.php/topic,3701.0.html