[SOLVED[NAT reflection fail, logs posted, PURE NAT enbled



  • I'm having trouble enabling internal NAT reflection after upgrading from 2.2.3 to 2.2.5 (stable). these ports are accecible from outside the network.

    http://picpaste.com/Capture-7b8Nq0BP.JPG

    I'm using multiwan load balancing hence i've done port forwarding for both WAN
    http://picpaste.com/Capture-JEyhoVXx.JPG

    There is no default gateway selected. Disable web config redirect rule is unchecked.
    Problem is, this setup was working when I was on 2.2.3, after the internal upgrade it seems to be broken

    Here's the firewall log for the port.. (x.x.x.x is my WAN IP)

    LAN	tcp	192.168.1.35:32400 (x.x.x.x:32400) <- 192.168.1.36:53169	CLOSED:SYN_SENT	
    WAN1_HATHWAY	tcp	x.x.x.x:14416 (192.168.1.36:53169) -> 192.168.1.35:32400	SYN_SENT:CLOSED	
    LAN	tcp	192.168.1.35:32400 (x.x.x.x:32400) <- 192.168.1.36:53170	CLOSED:SYN_SENT	
    WAN1_HATHWAY	tcp	x.x.x.x:33722 (192.168.1.36:53170) -> 192.168.1.35:32400	SYN_SENT:CLOSED	
    LAN	tcp	192.168.1.35:32400 (x.x.x.x:32400) <- 192.168.1.36:53171	CLOSED:SYN_SENT	
    WAN1_HATHWAY	tcp	x.x.x.x:65175 (192.168.1.36:53171) -> 192.168.1.35:32400	SYN_SENT:CLOSED
    

    anything i'm missing?



  • for some reason, when I created traffic shaping, it included a firewall rule for the ports which prevented access. I de-linked the firewall rules and it started working again


Log in to reply