PDFSense boot failing after install

[dannyb2100]

Hey there,

I have been attempting to install PDFSense on a HP ProLiant Gen8 G1610T

Processor
Intel Celeron G1610T (2 core, 2.3 GHz, 2MB, 35W)

Memory
4GB (1x4GB) UDIMM

Network controller
1Gb 332i Ethernet Adapter 2 Ports per controller

Storage controller
(1) Dynamic Smart Array B120i

But upon completing the install from a USB Stick, I get the following error upon booting.

I have been racking my brain trying to fix this error. ANY advice would be fantastic!

Thank you.

[KOM]

1.  No need to link to images on Imgur.  You can upload them to here directly.

2.  Probably a BIOS issue.  Make sure your system is current for BIOS rev, and perhaps play with any ACPI settings.  Others have had similar problem sin the past.

[dannyb2100]

@KOM:

1.  No need to link to images on Imgur.  You can upload them to here directly.

2.  Probably a BIOS issue.  Make sure your system is current for BIOS rev, and perhaps play with any ACPI settings.  Others have had similar problem sin the past.

Couldn't see an option to upload, just went with what I normally do on forums. But noted for future use.

And thank you for sending me on the right track. It seems the Smart Raid Controller wasn't playing nicely. Reverted to Legacy and it's working beautifully! :)

[KOM]

Glad to hear you got it working.