Win10 can't connect ipsec on pfsense 2.2.6
-
It's my log
Dec 24 10:41:45 charon: 05[JOB] <6> deleting half open IKE_SA after timeout
Dec 24 10:41:15 charon: 16[NET] <6> sending packet: from 219.85.218.78[500] to 203.74.122.103[500] (333 bytes)
Dec 24 10:41:15 charon: 16[ENC] <6> generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(MULT_AUTH) ]
Dec 24 10:41:15 charon: 16[IKE] <6> sending cert request for "C=TW, ST=Taiwan, L=Taipei, O=aspa, E=akong@aspa.idv.tw, CN=internal-ca"
Dec 24 10:41:15 charon: 16[IKE] <6> remote host is behind NAT
Dec 24 10:41:15 charon: 16[IKE] <6> 203.74.122.103 is initiating an IKE_SA
Dec 24 10:41:15 charon: 16[ENC] <6> received unknown vendor ID: 01:52:8b:bb:c0:06:96:12:18:49:ab:9a:1c:5b:2a:51:00:00:00:02
Dec 24 10:41:15 charon: 16[IKE] <6> received Vid-Initial-Contact vendor ID
Dec 24 10:41:15 charon: 16[IKE] <6> received MS-Negotiation Discovery Capable vendor ID
Dec 24 10:41:15 charon: 16[IKE] <6> received MS NT5 ISAKMPOAKLEY v9 vendor ID
Dec 24 10:41:15 charon: 16[ENC] <6> parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) V V V V ]My client system win10,The android strongswan can connect pfsense ipsec.
Could I need edit something?
-
Check logs in windows event viewer. The VPN logs are under Windows Logs > Application Logs. The source would be RasClient.
-
Hello,
Error Code is 809,What is this problem? -
I have test result.
Client PC –> Pfsense 2.2.6 --------IPSec IKEV2------------> Remote Pfsense 2.2.6 IPSec VPN Server
This is will failed and get error code 809Client PC --> Mobile Hot Spot Internet Share ------IPSec IKEV2 ----------> Remote Pfsense 2.2.6 IPSec VPN Server
This is can connect it.I don't know why my client under pfsense 2.2.6 will failed.But it's can connect if Client PC under ip sharing or mobile hot spot.
How to check it?