2.2.6 upgrade fails
-
I just tried to upgrade from 2.2.5 to 2.2.6 via web auto-upgrade feature. Everything appeared to go smoothly, but the firewall would not reboot.
So I attempted to boot a live usb stick to use the recovery feature. This also failed, my config was not recovered.Since my local config back up was a bit old, and I was already in the installer I went for a fresh install.
After setting up interfaces and DHCP at the console, I rebooted when prompted.This time when the router came up the only device that could reach the webUI was …my phone?
The other clients can ping the pfsense gateway, and have internet access, but timeout on the webUI.Any ideas?
-
No one?
It is a fresh install, no filtering at all. The LAN interface is connected to a dumb switch. There is nothing going on but DHCP and NAT.
I don't know why only one client can reach the webUI. -
!!!!Need more info or screen shots!!