2.2.6 Traffic Shaper causing notification after reboot
-
After updating 2.2.5 to 2.2.6 I get the following at the top right of my pfSense web page notified to me when I reboot my box:
There were error(s) loading the rules: /tmp/rules.debug:45: errors in queue definition - The line in question reads [45]: queue qInternet on em1 bandwidth 30Mb hfsc ( ecn , linkshare 30Mb , upperlimit 30Mb ) { qACK, qP2P, qVoIP } ]
The following are the items from /tmp/rules.debug that are involved:
scrub on $WAN all fragment reassemble
scrub on $LAN all fragment reassemblealtq on em0 hfsc bandwidth 5Mb queue { qInternet }
queue qInternet on em0 bandwidth 5Mb hfsc ( ecn , linkshare 5Mb , upperlimit 5Mb ) { qACK, qDefault, qP2P, qVoIP }
queue qACK on em0 bandwidth 15.046% hfsc ( ecn , linkshare 15.046% )
queue qDefault on em0 bandwidth 7.523% hfsc ( ecn , default )
queue qP2P on em0 bandwidth 3.7615% hfsc ( ecn , linkshare 3.7615% , upperlimit 3.7615% )
queue qVoIP on em0 bandwidth 32Kb hfsc ( ecn , realtime 500Kb )altq on em1 hfsc queue { qLink, qInternet }
queue qLink on em1 bandwidth 20% qlimit 500 hfsc ( ecn , default )
queue qInternet on em1 bandwidth 30Mb hfsc ( ecn , linkshare 30Mb , upperlimit 30Mb ) { qACK, qP2P, qVoIP }
queue qACK on em1 bandwidth 16.98% hfsc ( ecn , linkshare 16.98% )
queue qP2P on em1 bandwidth 4.245% hfsc ( ecn , linkshare 4.245% , upperlimit 4.245% )
queue qVoIP on em1 bandwidth 32Kb hfsc ( ecn , realtime 500Kb )***** queue qInternet on em1 …. bolded, above, is the line causing the notification.
In 2.2.5 I used the Traffic Shaper Wizard to create the above. When I got the errors in 2.2.6 I looked at the above and used "Remove" to get rid of the 2.2.5 definitions and completely re-did them in 2.2.6 using the Traffic Shaper Wizard. The result is exactly the same, I get notified. At this point I'm not sure whether bandwidth management is working, despite the notification, or if the notification is just bogus?
Oh, if I remove my definitions with the Traffic Shaper I get NO notifications when I reboot the box.
It is late for me and I need to go to bed ... I'll check to see if anyone has comments/insight tomorrow sometime. Thanks in advance (and please don't flame me --- I'm still a noob, take it easy. <smile>)</smile>
-
My guess is it's your realtime on VoIP. Your interface has a max of 5Mb, and your Internet queue has 5Mb, and your VoIP queue has 0.5Mb of real-time. Remember, realtime always takes from the interface directly. I think that means you have 5.5Mb of bandwidth assigned.
You don't need to reboot for settings to take affect. Just apply your changes.
-
After the Upgrade to 2.2.6 i have the same Problem, but this is strange because I never used the Traffic Shaper.
There were error(s) loading the rules: /tmp/rules.debug:52: errors in queue definition - The line in question reads [52]: queue qInternet on re2 bandwidth 150000Kb hfsc ( ecn , linkshare 150000Kb , upperlimit 150000Kb ) { qACK, qP2P, qVoIP }
There were error(s) loading the rules: /tmp/rules.debug:52: errors in queue definition - The line in question reads [52]: queue qInternet on re0 bandwidth 150000Kb hfsc ( ecn , linkshare 150000Kb , upperlimit 150000Kb ) { qACK, qP2P, qVoIP }Because this Error occur i am back again on v2.2.5.