Dashboard WAN Graph & LCDProc show incorrect outgoing throughput



  • Hello,

    I think this began at the 2.2.6 upgrade.  The WAN throughput on the dashboard graph and on LCDProc show 1/3-1/2 the actual outgoing WAN throughput.  RRDGraph shows correctly.  I'm doing an offsite backup via SSH and I verified the throughput on the the remote site (not running pfSense).  I normally show 20-30Mb outgoing on the WAN side.  With this issue, on the Dashboard & LCDProc, I never see 10Mb, even though the traffic is really solid at 25-30Mb.

    Lots of screenshots attached.  Thoughts?

    Thanks,
    Frank
    ![Screen Shot 2016-01-12 at 1.51.46 PM.png](/public/imported_attachments/1/Screen Shot 2016-01-12 at 1.51.46 PM.png)
    ![Screen Shot 2016-01-12 at 1.51.46 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-01-12 at 1.51.46 PM.png_thumb)
    ![Screen Shot 2016-01-12 at 1.53.36 PM.png](/public/imported_attachments/1/Screen Shot 2016-01-12 at 1.53.36 PM.png)
    ![Screen Shot 2016-01-12 at 1.53.36 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-01-12 at 1.53.36 PM.png_thumb)
    ![Screen Shot 2016-01-12 at 2.07.42 PM.png](/public/imported_attachments/1/Screen Shot 2016-01-12 at 2.07.42 PM.png)
    ![Screen Shot 2016-01-12 at 2.07.42 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-01-12 at 2.07.42 PM.png_thumb)


Log in to reply