Fatal trap 12: page fault while in kernel mode in version 2.2.6
-
Any help for this, I use the latest version 2.2.6? I attached crash dump file also.
Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0xc fault code = supervisor write, page not present instruction pointer = 0x20:0xc12bdf10 stack pointer = 0x28:0xf18a0b30 frame pointer = 0x28:0xf18a0b3c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 11126 (pfctl) version.txt06000027312654245716 7631 ustarrootwheelFreeBSD 10.1-RELEASE-p25 #0 c39b63e(releng/10.1)-dirty: Mon Dec 21 15:19:53 CST 2015 root@pfs22-i386-builder:/usr/obj.RELENG_2_2.i386/usr/pfSensesrc/src.RELENG_2_2/sys/pfSense_SMP.10 ```[crash.txt](/public/_imported_attachments_/1/crash.txt)
-
I had this exact issue. My hard drive had failed shortly after I started getting the trap error and I assumed it was that. I replaced the hard drive and restored my config and it still kept happening. After a long time of trying to figure out what the problem was I reloaded 2.2.6 from scratch and put my config back in by hand. Since then I haven't had a single issue with it crashing. It's been running solid for a month now instead of crashing multiple times a day.
It looks like it was something in the config causing it to trip up. I still have no idea wha the exact cause was but it's working now and better then ever and thats all that matters to me.
For me this issue started when i upgraded from 2.2.4 to 2.2.5 and carried over to 2.2.6. Throwing away my old config and starting over was the only way I could get it to work again.
-
Exactly the same issue at my site. I testest new hardware, the problem still occurs. I will test to throw away my old config. Thank you for your report.
-
The problem occur one time every day, I couldn't determine the cause of the problem, also I don't know if downgrading to 2.2.4 can help.
-
Same problem with a new config file. I will test Version 2.3.
-
Up
-
Working perfect after replacing the RAM. Thanks!