Setup Internal Load Balancing for internal Only
-
Hi All,
Any help would be appreciated. I can't seem to get this working. I have read many posts but just getting confused now.
SRX is our corporate firewall. PFSense is what our vendor wants to use for Load Balancing. Both the LAN and WAN Interfaces are internal networks.
I am trying to VIP to LAN WEBSERVERs which would then NAT via SRX to the WAN or LAN VIP. Preferably, I would like to just remove the WAN interface as PFSense is only internal. The Pool shows up but I can't get it to load from a host on the 10.6.X.X network .
PS C:\Users\administrator> ping 10.6.0.201
Pinging 10.6.0.201 with 32 bytes of data:
Reply from 10.6.0.7: Destination host unreachable.
Reply from 10.6.0.7: Destination host unreachable.Ping statistics for 10.6.0.201:
Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Control-C
PS C:\Users\administrator> ping 10.6.0.200Pinging 10.6.0.200 with 32 bytes of data:
Reply from 10.6.0.200: bytes=32 time=1ms TTL=64
Reply from 10.6.0.200: bytes=32 time<1ms TTL=64
Reply from 10.6.0.200: bytes=32 time<1ms TTL=64LAN Interface = IPv4 address 10.6.0.200
WAN Interface = IPv4 address 192.168.19.200Virtual IP address Interface
10.6.0.201/32 LAN other Proxy ARPPools:
Name Mode Servers Monitor Description
LB-Pool-80 Load balancing
10.6.0.54:80 (100.00%)
10.6.0.7:80 (100.00%)
TCP
LB-Pool-44 Load balancing
10.6.0.54:443 (100.00%)
10.6.0.7:443 (100.00%)
TCPVirtual Servers
LB-VirtualServer-80 10.6.0.201 : 8010.6.0.7
10.6.0.54Active
Total Sessions: 4
Last: 0/60s 0/h 4/d
Average: 0/60s 0/h 3/d LB-VirtualServer-80
LB-VirtualServer-443 10.6.0.201 : 44310.6.0.7
10.6.0.54Active
Total Sessions: 5
Last: 0/60s 0/h 5/d
Average: 0/60s 0/h 3/d LB-VirtualServer-443