IKEv2 Client can't access LAN, static route?



  • Hello friends,

    Posted on here yesterday unable to access the Internet once connected to VPN and got that issue solved.

    Now my issue is I can not ping/access any resources on the LAN that I am accessing via VPN.

    My clients receive a virutal ip of xxx.xxx.11.1/24, and my LAN is an xxx.xxx.10.1/24, so I believe this has to do with creating a static route? I am not sure, newbie here still working on getting my box set up in a lab before production.

    Any help or suggestions appreciated!



  • Provide screenshot.  Should be 11.0/24 not 11.1/24



  • That was a typo in my original post, my apologies.

    Attached are the screenshots of my ipsec configuration, on the Windows side I followed the windows client instructions with the only notable change being not using the remote gateway to access the internet.

    It connects to the VPN fine, but I am not able to ping any network devices, including the pfsense box itself.

    ![Screen Shot 2016-03-04 at 10.17.51 AM copy.png](/public/imported_attachments/1/Screen Shot 2016-03-04 at 10.17.51 AM copy.png)
    ![Screen Shot 2016-03-04 at 10.17.51 AM copy.png_thumb](/public/imported_attachments/1/Screen Shot 2016-03-04 at 10.17.51 AM copy.png_thumb)
    ![Screen Shot 2016-03-04 at 10.19.31 AM.png](/public/imported_attachments/1/Screen Shot 2016-03-04 at 10.19.31 AM.png)
    ![Screen Shot 2016-03-04 at 10.19.31 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-03-04 at 10.19.31 AM.png_thumb)
    ![Screen Shot 2016-03-04 at 10.18.30 AM.png](/public/imported_attachments/1/Screen Shot 2016-03-04 at 10.18.30 AM.png)
    ![Screen Shot 2016-03-04 at 10.18.30 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-03-04 at 10.18.30 AM.png_thumb)



  • Are you using multiple gateways?  What do your rules look like on your interfaces?  Allow all on each?