• hello .

    i have 2 physical wan interfaces and 1 LAN with 2 subinterfaces (vlans 4,3)
    here's what i need :
    Lan re2:
      vlan 4: with dhcp range 2~254
      vlan 3: with dhcp range 2~254
    Wan 1:
    wan 2:

    First when i connect to any pc to switch port which belong to any vlans doesn't get ip from dhcp or even work ,
    Second i need vlan3 traffic to be out from WAN1 and vlan4 traffic to be out from WAN2 ,,,,anyluck by that
    ![rule on vlan3.PNG](/public/imported_attachments/1/rule on vlan3.PNG)
    ![rule on vlan3.PNG_thumb](/public/imported_attachments/1/rule on vlan3.PNG_thumb)

  • should be fairly straightforward if the switch is configured correctly & if the realtek nic driver behaves

    especially the second one is a big IF. realtek & freebsd are not the best of friends.

  • i did create the 2 vlans 3,4 on the switch  and mention theip default gateway will be the lan ip for pfsense,However. i can't get an ip whenever i connect a pc to any switchport belong to 3 or 4.
    related to my lan nic it should be working fine as long as it accept already the subinterface ?