UCOM & UFTDI Load
-
To get a new LCD I have working I need to get ucom and uftdi loaded. It says ucom.1 is loaded, but I see no cuaU1, cuaU0, or ttyU1 or 0 showing up under /dev. It is acting like I do not have the LCD plugged in.
-
You already have a thread open for this issue, best to keep it all in one place.
Those devices are already in the pfSense kernel, if they do not show up in /dev/ (check dmesg when plugging it in), it's not likely supported. Try a pfSense 2.3 snapshot.
Follow up on your other thread.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.