[ WAN pppoe faillure after upgrade]

[r0n]

Hi,

1WAN(pppoe), 1LAN

I just have upgraded my pfsense using cvs_sync.sh releng_1 and rebooted.

After the reboot, the WAN interface don't work.

The GUI:
–-------------------------------
WAN interface (xl2)
Status up
PPPoE down 
MAC address 00:01:03:...
Media 10baseT/UTPa
In/out packets 0/116 (0 bytes/4 KB)
In/out errors 0/0
Collisions 0

Logs in /var/log/system.log :

Apr 18 18:24:59 wall01 mpd: [pppoe] LCP: Down event
Apr 18 18:24:59 wall01 mpd: [pppoe] device: OPEN event in state DOWN
Apr 18 18:24:59 wall01 mpd: [pppoe] pausing 4 seconds before open
Apr 18 18:24:59 wall01 mpd: [pppoe] device is now in state DOWN
Apr 18 18:25:03 wall01 mpd: [pppoe] device: OPEN event in state DOWN
Apr 18 18:25:03 wall01 mpd: [pppoe] pausing 1 seconds before open
Apr 18 18:25:03 wall01 mpd: [pppoe] device is now in state DOWN
Apr 18 18:25:04 wall01 mpd: [pppoe] device: OPEN event in state DOWN
Apr 18 18:25:04 wall01 mpd: [pppoe] device is now in state OPENING
Apr 18 18:25:13 wall01 mpd: [pppoe] PPPoE connection timeout after 9 seconds
Apr 18 18:25:13 wall01 mpd: [pppoe] device: DOWN event in state OPENING
Apr 18 18:25:13 wall01 mpd: [pppoe] device is now in state DOWN
Apr 18 18:25:13 wall01 mpd: [pppoe] link: DOWN event
Apr 18 18:25:13 wall01 mpd: [pppoe] LCP: Down event
Apr 18 18:25:13 wall01 mpd: [pppoe] device: OPEN event in state DOWN
Apr 18 18:25:13 wall01 mpd: [pppoe] pausing 6 seconds before open
Apr 18 18:25:13 wall01 mpd: [pppoe] device is now in state DOWN
Apr 18 18:25:19 wall01 mpd: [pppoe] device: OPEN event in state DOWN
Apr 18 18:25:19 wall01 mpd: [pppoe] device is now in state OPENING
Apr 18 18:25:28 wall01 mpd: [pppoe] PPPoE connection timeout after 9 seconds
Apr 18 18:25:28 wall01 mpd: [pppoe] device: DOWN event in state OPENING
Apr 18 18:25:28 wall01 mpd: [pppoe] device is now in state DOWN
Apr 18 18:25:28 wall01 mpd: [pppoe] link: DOWN event
Apr 18 18:25:28 wall01 mpd: [pppoe] LCP: Down event
Apr 18 18:25:28 wall01 mpd: [pppoe] device: OPEN event in state DOWN
Apr 18 18:25:28 wall01 mpd: [pppoe] pausing 6 seconds before open
–-----------------------------------------------------------------

and tcpdump on the interface:

tcpdump: listening on xl2, link-type EN10MB (Ethernet), capture size 96 bytes
18:32:27.021550 PPPoE PADI [Host-Uniq "@I-."] [Service-Name]
        0x0000:  ffff ffff ffff 0001 034c d730 8863 1109  …......L.0.c..
        0x0010:  0000 000c 0103 0004 4049 2dc3 0101 0000  ........@I-.....
18:32:29.020356 PPPoE PADI [Host-Uniq "@I-."] [Service-Name]
        0x0000:  ffff ffff ffff 0001 034c d730 8863 1109  …......L.0.c..
        0x0010:  0000 000c 0103 0004 4049 2dc3 0101 0000  ........@I-.....
18:32:33.019749 PPPoE PADI [Host-Uniq "@I-."] [Service-Name]
        0x0000:  ffff ffff ffff 0001 034c d730 8863 1109  …......L.0.c..
        0x0010:  0000 000c 0103 0004 4049 2dc3 0101 0000  ........@I-.....
18:32:41.025450 PPPoE PADI [Host-Uniq 0x80372CC3] [Service-Name]
        0x0000:  ffff ffff ffff 0001 034c d730 8863 1109  …......L.0.c..
        0x0010:  0000 000c 0103 0004 8037 2cc3 0101 0000  .........7,.....

Any ideas ?

Best regards,
ronan.

[sullrich]

No ideas at all.  A LOT of people tested PPPoE and it worked fine for them.

[r0n]

:/

Here is the version runnning:

Version  BETA3
built on Thu Mar 2 04:23:07 UTC 2006

It is the second time i enconter this problem, last time, i reinstalled :/

Regardds,
ronan.

[sullrich]

Like I said before, a LOT of people tested BETA3 right before we released it and it worked fine for them.

Not sure why your situation is different.

[hoba]

Just tested PPPoE at our office line. No problem to authenticate and connect here with beta3.

[kdr_98]

I've installed a fresh Beta3 today with PPPoE connection.
No problems noticed here also.

[hoba]

powercycle the modem and leave it powered off for a while to make sure.

[r0n]

okok, seems to have a problem with the modem..

Btw, pfsens rocks ! thanks to it team for this work :)

regards,
ronan.