Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PfSense 2.3 and Huawei E8372 - Making it Work

    Scheduled Pinned Locked Moved
    Hardware
    4
    19
    17.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      devianceluka
      last edited by

      @AndrewZ:

      @devianceluka:

      Send:AT^NVRDEX=50503,0,128

Recieve: ERROR

      This means that your particular modem is blocking access to this command as well. Without this information I have no idea how to generate the OEM code.
      As I mentioned earlier, result depends on the firmware the modem is running. Please post the firmware version you're running (available from ATI command), just for our information.

      
Recieve: Manufacturer: huawei
Recieve: Model: E8372
Recieve: Revision: 21.313.11.01.1241
Recieve: IMEI: xxx
Recieve: +GCAP: +CGSM,+DS,+ES
Recieve: OK

      I finally got excited when I saw you could do it. Now I'm back to the starting point. :-(

      1 Reply Last reply Reply Quote 0
      • A
        AndrewZ
        last edited by

        @devianceluka:

        
Recieve: Manufacturer: huawei
Recieve: Model: E8372
Recieve: Revision: 21.313.11.01.1241

        As far as I know people were successful with datalock unlock on 21.xxx.99.xx.xx firmware.
        I suggest to try changing the fw.

        1 Reply Last reply Reply Quote 0
        • D
          devianceluka
          last edited by

          @AndrewZ:

          @devianceluka:

          
Recieve: Manufacturer: huawei
Recieve: Model: E8372
Recieve: Revision: 21.313.11.01.1241

          As far as I know people were successful with datalock unlock on 21.xxx.99.xx.xx firmware.
          I suggest to try changing the fw.

          What I do not fully understand is this:

          1. for DATALOCK="OEM code", one should input OEM code from AT^NVRDEX command correct? So it's the NVRDEX command that is not working.
          2. all I need is OEM code? With this code and DATALOCK command - I unlock other AT commands?

          What if I write a small script that bruteforces OEM code in DATALOCK command?

          Thanks for still sticking here and helping. I really appreciate it!

          1 Reply Last reply Reply Quote 0
          • A
            AndrewZ
            last edited by

            @devianceluka:

            1. for DATALOCK="OEM code", one should input OEM code from AT^NVRDEX command correct? So it's the NVRDEX command that is not working.
            2. all I need is OEM code? With this code and DATALOCK command - I unlock other AT commands?

            1. The output of AT^NVRDEX command is used to generate an OEM code by a special tool.
            2. Generally - yes. Potentially one can reset or change the OEM code, but this requires ^NVWREX command being working.

            1 Reply Last reply Reply Quote 0
            • D
              devianceluka
              last edited by

              @AndrewZ:

              @devianceluka:

              1. for DATALOCK="OEM code", one should input OEM code from AT^NVRDEX command correct? So it's the NVRDEX command that is not working.
              2. all I need is OEM code? With this code and DATALOCK command - I unlock other AT commands?

              1. The output of AT^NVRDEX command is used to generate an OEM code by a special tool.
              2. Generally - yes. Potentially one can reset or change the OEM code, but this requires ^NVWREX command being working.

              Andrew, how sure are you that AT^DATALOCK has a 8 digit code in it? My script, that tried every possible combination from 99999999 to 00000000 just finished and every single combination throws ERROR. Can you please help me on what to do next?

              1 Reply Last reply Reply Quote 0
              • A
                AndrewZ
                last edited by

                I know that some commands are locked in some fw versions. I suppose that with particular 'bad' fw version the modem may just refuse the right code. I suggest to load the generic (non-operator, not branded) firmware.

                1 Reply Last reply Reply Quote 0
                • D
                  devianceluka
                  last edited by

                  @AndrewZ:

                  I know that some commands are locked in some fw versions. I suppose that with particular 'bad' fw version the modem may just refuse the right code. I suggest to load the generic (non-operator, not branded) firmware.

                  Good news, long story short: I got the OEM code and I get "OK" when I enter it with AT^DATALOCK.
                  But bad news is, that:
                  "
                  AT^SETPORT? = Recieve: ^SETPORT:A1,A2;A3,A2
                  "
                  AT^SETPORT=?
                  AT^SETPORT="A1,A2;1,2,3"
                  AT^SETPORT="A1,A2;A3,A2"
                  AT^U2DIAG=0
                  " = all throw ERROR

                  What now?

                  1 Reply Last reply Reply Quote 0
                  • A
                    AndrewZ
                    last edited by

                    I can only repeat what was said earlier:

                    I do not own such a modem myself, so I can only try to help basing on my previous experience with the similar modems.
                    I know that some commands are locked in some fw versions. I suggest to load the generic (non-operator, not branded) firmware. No guarantee it will help though.

                    And as always - please mention the firmware version used in all [un]success stories.

                    1 Reply Last reply Reply Quote 0
                    • E
                      el-quique
                      last edited by

                      It works on e3131 . Thank you

                      The only thing to work I had to modify the file lte.cfg

                      from
                      MessageContent="55534243123456780000000000000a1106200000000000010000000000000$

                      to
                      MessageContent="55534243123456780000000000000a11062000000000000100000000000000"

                      :)

                      1 Reply Last reply Reply Quote 0
                      • X
                        Xamaba
                        last edited by

                        Thank you I noticed the string was clipped when I pasted it.

                        @el-quique:

                        It works on e3131 . Thank you

                        The only thing to work I had to modify the file lte.cfg

                        from
                        MessageContent="55534243123456780000000000000a1106200000000000010000000000000$

                        to
                        MessageContent="55534243123456780000000000000a11062000000000000100000000000000"

                        :)

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post