@dma_pf said in Policy Routing Rule Not Working: Diagnostic->Tables shows that SitesThroughWAN has no entries Ok, well that's a problem. It can't match anything if it's not populated. Check the resolver logs. You may have something unresolvable in there. To workaround it before you upgrade I would move that to two aliases, one for IPs and one for FQDNs, and use two firewall rules. Steve

@stephenw10 I will retest it will get back to you

It could be either, or both. What ports does Yowhatsapp require? What are you passing in firewall rule on OpenVPN? Do you see blocked traffic? Steve

@onemt said in The website (ieee.org) does not load: No clue why this happens. Serious ? I'll bet it related to : @onemt said in The website (ieee.org) does not load: I use squidguard, easy to proof : remove "squidguard" and your issue is gone. Setting up "squidguard" (squid, snort, etc) is a complex process. A lot of learning is not an option ;)

Yes, those are scripts that run via the NRPE package as I read it. Go to System > Package Manager and install it. Steve

It can wait there for a long time trying to start the Resolver if there's no upstream connectivity but it should eventually pass that even with the WAN disconnected. Steve

@perfectbake420 Firewall rules apply to the interface they enter, not exit. Also, existing states are not affected by a rule change. You need to clear the states of the specific clients/devices your new rule applies to before they will obey the new rule.

@ogghi I think I'll try and debug on the windows server/NPS side. The packets arrive at the windows server as seen on Wireshark. But nothing is ever logged on NPS. So it might be some really stupid bug here..

@rameshk said in Ugraded from 2.5.1 to 2.5.2 and a few services stopped working: DynamicDNS - Didn't update the WAN IP and every time I force update it returns an error "mismatch credential" About this issue, here there is a possible solution/workaround.

I have encountered the same pppoe error in 2.5.2, without using a local subnet similar with the gateway address. What now? IFACE: Adding IPv4 address to pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): File exists

@stephenw10 said in NG 3100 forgot which port used: That will return the ports nginx is listening on. @stephenw10 thank you, fixed it!

@julio12345 I was also going from 2.5.1 sorry didn't make that clear that's why the top warning was so confusing for me. Plus those lib errors and in 2019 directory and I do remember having problems when there was a big PHP upgrade in the past so maybe they are not relevant?

@lucasg said in What the "Timeservers" field (in the general setup) does?: I have two XG-1541. In System > General Setup, I have added my internal NTP server's IP in the "Timeservers" field. What are your internal servers using for a source? I have pfsense configured to use 3 stratum 1 servers and 1 stratum 2.

well it died again this morning. I connected to the pfSense console and was able to ping out to 1.1.1.1 but couldn't connect to anything on my home network. A reboot fixed it. What can I look for to find why this is happening? btw: I upgraded to 2.5.2 a few days ago but can't change the title of the original post

@jimp All the detail is in the Config History section. Feature request submitted: https://redmine.pfsense.org/issues/12118