PfSense changes subnet in the nat rules!!
-
@johnpoz try to see inside the rules in network, and look if it has been changed to /31. In the list of Nat Rules is not always showing the subnet changed.
-
Mmm, I can't replicate it either.
That is what you're doing though? On your system making that change to one port forward changed all of them and set the destination to /31?
-
@stephenw10 in all rules that have TCP/UDP, Pfsense change only the destination network subnet to /31, I repeat, previously configured has singles host, to network address /31.
-
If it's actually set to a /31 subnet it will show as that there:
Are you sure this is not your browser auto-fill setting some fields when you edit the rule?
-
@gianluca-0 said in PfSense changes subnet in the nat rules!!:
try to see inside the rules in network
Those are the wan rules.. Here our the nat rules
Yes this is a clean install of 2.5.2.. Sorry don't have a 5 year old test setup that I have kept updating over the years ;) heheh
-
@stephenw10 yes :) I'm sure..I understand what you're meaning. And autofill can not change from single host to network address and also change subnet to /31 (I think).
-
anyway, I need some time to build a new Pfsense virtual machine and restore my configuration, so see what happened. Pfsense is not owned by us, we have a manager user but we cannot log in with ssh for example.
-
There is something slightly odd there in 2.5.2/21.05.1. If you set the destination as network the list of subnet sizes includes /32 and also /31 twice!
However selecting them doesn't seen to cause a problem. And it's fixed in 2.6/21.09.
Steve
-
@stephenw10 but that Nat rules are single hosts, so / 32 is implied.
-
Exactly. If you set /32 there it just goes back to single host. It should not appear in that list as a 'network' but selecting it does no harm.
Steve
-
@stephenw10 said in PfSense changes subnet in the nat rules!!:
If you set the destination as network the list of subnet sizes includes /32 and also /31 twice!
Where are you seeing this? Looking on nat and firewalls - I do not see that
Oh I see it on 21.05.1 but not my test 2.5.2 box..
But only in the nat, not firewall rules..
-
Yeah, I was testing in 21.05.1. I assume it would affect both. Hmm.
Either way it's fixed in 21.09 so...
-
@stephenw10 said in PfSense changes subnet in the nat rules!!:
Either way it's fixed in 21.09 so...
Which should be released any day ;) Since only a couple of days left in September (Month 9) hehehe..
