PC Engines apu2 experiences

Qinn

@soder Thanks for clearing this

Qinn

Btw does anyone know why the package manager in the pfS GUI doesn't keep track or better does not show packages that are installed from the CLI, like flashrom ?

Cheers Qinn

stephenw10

It only shows pfSense packages, which can also be installed from the CLI. They contain the xml element the package manager reads to get the version info etc. For example:
https://github.com/pfsense/FreeBSD-ports/blob/devel/sysutils/pfSense-pkg-Netgate_Firmware_Upgrade/files/usr/local/share/pfSense-pkg-Netgate_Firmware_Upgrade/info.xml

Steve

Qinn

@stephenw10 Thanks for the explanation, so in my case the Netgate coreboot upgrader won't work on an APU2C4, understandable of course as it is not Netgate certified hardware.

stephenw10

Indeed, it doesn't include any ROMs for APU or recognise the hardware to offer it.
It does install flashrom though so you can use it to add that via the gui.

Steve

Qinn

@stephenw10 I can't use the GUI and I don't like to have something in the GUI menu that doe not work. Flashrom is already installed using pkg

stephenw10

The only advantage to doing that is that the package is in the config so if you ever re-install and restore the config flashrom gets installed again. You still need to use flashrom in the CLI.

Steve

Qinn

@stephenw10 I can't use the GUI and I don't like to have something in the GUI menu that does not work. Flashrom is already installed using pkg

kevindd992002

@stephenw10 said in PC Engines apu2 experiences:

The only advantage to doing that is that the package is in the config so if you ever re-install and restore the config flashrom gets installed again. You still need to use flashrom in the CLI.

Steve

This is what I do. Even though I don't use the package (since it doesn't work for my APU2C4) I have it installed so that flashrom gets installed persistently even after updating pfsense or reinstalling it.

kevindd992002

@kevindd992002 said in PC Engines apu2 experiences:

For the APU2C4, why is it that when I have a serial cable connected between its serial port and a computer, its USB ports don't work? I have a UPS plugged in to one of its USB ports and I use the NUT package in pfsense. As soon as I connect to the hardware through the serial port (using putty), the USB port does not work. Unplugging the serial cable fixes the issue and that's why I know it's the one causing it. This is happening for both of my APU2C4 boxes.

As an update to this issue, I bought a Gearmo USB to Serial adapter and it solved the issue I'm having. So the cause is definitely because of the old cheap cable that I was using. Lesson learned.

logan5247

Anyone try 2.6.0 (or upgrade to pfSense Plus) on the APU2 yet?

https://www.reddit.com/r/PFSENSE/comments/ssabdz/pfsense_plus_version_2201_and_pfsense_ce_version/

Vollans

@logan5247 I don't plan to until I know there are APU LED drivers available, as for sanity at home I rely on those a lot to know whether NBN is working or the backup connection.

rcoleman-netgate

@logan5247 During testing I migrated mine without a single issue.

kinch

@logan5247 not yet, but i will do it later today, provide feedback then...

Qinn

Upgraded pfS 2.5.2 CE to 2.6.0 took about 11 minutes, all went well, after upgrade had to update Avahi.

Thnx Netgate!

DaddyGo

@qinn said in PC Engines apu2 experiences:

Thnx Netgate!

same here on test apu4d4 / FW v4.15.0.2

++++edit:

and it also worked perfectly (let's see what it will show us)....

Vollans

I can confirm the apuled.ko driver that worked in 2.5.2 still works in 2.6

kevindd992002

What is the use of the apuled driver and how do you install it?

fireodo

@kevindd992002 said in PC Engines apu2 experiences:

What is the use of the apuled driver and how do you install it?

A possible utilisation you can find here:
Apuled

Regards,
fireodo

alexouxou

Hello,

I'm running APU2 Legacy firmware v4.0.33 and would like to switch to the mainline firmware.
When I bought my APU2 a few years ago I tried to do this update without success.

Is there something specific to verify in order to switch from legacy to mainline firmware.

I saw in this post that I just havec to connect via SSH to my APU2 and then execute these commands (adapted to the current release):

pkg install flashrom

(upload the firmware to /tmp with scp and run:)

flashrom -w /tmp/apu2_v4.15.0.3.rom -p internal:boardmismatch=force
Shutdown pfSense, pull the power for 10 seconds, then boot up.

Is there something else to do or should it run without any error ?
If there is an error, is it possible to rollback ?

Thanks in advance,
Alex