browser gui misery

bPsdTZpW

https://pastebin.com/wvKa9cEP

It looks like something has created a gigantic page, which it then attempts to protect using csrf_ob_handler(), which then fails because the lines cited in your crash report attempt to replace strings in it with something potentially larger. Looks like a bug or possibly a penetration attempt.

lyle817

<<deep sigh>>

I guess a re-install was in my future anyway, so here I go....

stephenw10

I would use the instructions here:
https://docs.netgate.com/pfsense/en/latest/install/index.html

And I'd probably do this to save time:
https://docs.netgate.com/pfsense/en/latest/backup/restore-during-install.html#restore-configuration-from-usb-during-install

Steve

lyle817

Woohoo, back in business and my white screen of death is a distant memory!!

Thank you, thank you @stephenw10 & @bPsdTZpW and Happy New Year!!

bPsdTZpW

@lyle817 And a happy New Year to you as well!

lyle817

Pfsense is working great, but for some reason the upgrade caused my Freenas to get dropped from the network. Now I can't access the Freenas webgui and pings are unsuccessful. It does not appear in the DHCP listing or on the ARP table.

I hooked up a monitor to the Freenas and everything looks fine. Rebooted both Freenas and pfsense a couple times, no joy. On the Freenas console it says, "The web interface is at: 192.168.1.175", but this is a lie.

Not necessarily Freenas experts here, but any ideas why the pfsense upgrade might cause this behavior?

stephenw10

Can you ping out from FreeNAS?

Is it showing a link on the NIC?

Traffic between a client on the LAN and the FreeNAS box would go directly, it wouldn't pass through pfSense at all.

Steve

lyle817

I tried pinging the router (192.168.1.1) and also my desktop PC (.135) from the Freenas shell, but in both cases got "Host is down"

"Is it showing a link on the NIC?". Not sure how to check that...

"... it wouldn't pass through pfSense at all". But the Freenas should show up on my pfsense DHCP Leases page.

lyle817

"Is it showing a link on the NIC?"

A-ha, no link lights! WTF? Now I'm really mystified!

Gertjan

@lyle817 said in browser gui misery:

A-ha, no link lights!

Well, change the cable, the port and/or switch it is connected to, or the NIC used by your FreeNAS.
If there is no "link", DHCP won't work. It's like there is no cable at all.

lyle817

Makes sense, thanks! I was thinking somehow the operating system was shutting down the NIC, but I see now this is likely a hardware problem just coincidental with my pfsense upgrade. Will attend to it tonight when I get back, thanks again guys!!!