Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Netgate SG-1100 LAN in bridge mode with a router no internet

    Scheduled Pinned Locked Moved General pfSense Questions
    33 Posts 3 Posters 3.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mike_broxt @stephenw10
      last edited by

      @stephenw10 Yes I have it. Even if I connect directly to a client. I can't get internet even with a direct LAN connection. Obviously Netgate is blocking it.

      1 Reply Last reply Reply Quote 0
      • M
        mike_broxt @stephenw10
        last edited by

        @stephenw10 Yes it can resolve. I will send you all relevant screenshots if that can help. ports.png netgate-outbound.png dns-resolve.png

        1 Reply Last reply Reply Quote 0
        • M
          mike_broxt
          last edited by

          @stephenw10 One more screenshot with LAN firewall rules:

          LAN-rule-firewall.png

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Hmm, that looks fine. I note the dns server at 192.168.3.1 is not one of the subnets you listed above. Did the ISP router LAN change?

            Start a ping from a client on the 1100 LAN to, say, 1.1.1.1. Then go to Diag > States and filter by 1.1.1.1. You should see two states. One on LAN and one on WAN with NAT applied.

            Steve

            M 1 Reply Last reply Reply Quote 0
            • M
              mike_broxt @stephenw10
              last edited by

              @stephenw10 Yes I have changed it to 192.168.3.1. I have pinged 1.1.1.1 from a client and all went well. Please see below the screenshot:

              diag-states-1.1.1.1.png

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                OK, that looks correct. So what is not working here?

                M 1 Reply Last reply Reply Quote 0
                • M
                  mike_broxt @stephenw10
                  last edited by

                  @stephenw10 We are back to square one I guess :) The Netgate LAN connection is not providing internet to a client nor to the TP-Link AP. It's possible to ping the Netgate from a client but I don't have internet. It looks like it's blocking outbound traffic but don't know where. Do you think it can be a possible hardware issue with LAN on the Netgate device? Thanks

                  M 1 Reply Last reply Reply Quote 0
                  • M
                    mike_broxt @mike_broxt
                    last edited by

                    @stephenw10 Is it possible to use OPT interface and connect it to TP-Link AP (WAN) and check if it works? How should I go about it?

                    M 1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      But we can see above that a client on the pfSense LAN can ping 1.1.1.1 which is a successful connection to the public internet. So what exactly is not working?

                      I imagine it's a DNS problem (because it's always dns! ๐Ÿ˜‰ ).
                      If you try to ping google.com from the client I imagine that fails, what error does it give.

                      Yes you can use OPT1. You need to:
                      Enable the interface and give it a new IP/subnet to use like 192.168.10.1/24
                      Enable a dhcp server on it in Services > DHCP Server > OPT tab.
                      Add a firewall rule to the OPT interface to pass all traffic, at least as a test.

                      Steve

                      1 Reply Last reply Reply Quote 1
                      • M
                        mike_broxt @mike_broxt
                        last edited by

                        @stephenw10 It looks like LAN is working. I have rebooted it with reroot option and that did the trick. Thanks for your help :-)

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Cool. Not sure what happened there then but I guess take the win . ๐Ÿ˜‰

                          1 Reply Last reply Reply Quote 1
                          • First post
                            Last post
                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.