Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    WAN does not renew after reboot

    General pfSense Questions
    7
    51
    10.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • RyanMR
      RyanM
      last edited by

      I have posted on this before (WAN interface does not renew after reboot), however it is still an issue.

      My router died and I am wintering out of state. I have a friend who can replace the router, so I am setting up a new one to swap it out with. The issue is that I still have this issue where the WAN interface does not pull an IP after booting up.

      Here is what the "Interfaces" panel looks like on the dashboard after boot:
      interfaces-dashboard.png

      And here is the Status > Interfaces screen looks like:
      interfaces-wan-before-renew.png

      And if I click the "Renew WAN" button, it pulls an IP:
      interfaces-wan-after-renew.png

      There was an open defect about this (Bug #9267), but it has been marked as resolved. What is causing this and how can I keep it from happening when this replacement router is installed?

      V 1 Reply Last reply Reply Quote 0
      • P
        Patch
        last edited by Patch

        I have notice the behaviour occasionally also. I think it occures if the WAN conection fails remotely.
        I have Hybrid Fibre Coaxial connection

        • coaxial connection to the property
        • Supplied hardware converts this to Ethernet (actually owned by NBN not the ISP)
        • pfsense connects to the Ethernet

        Failure remote to the coaxial to ethernet hardware appear to result in pfsense not getting an IPv4 address from the remote DHCP. It can be fixed by renewing the lease in pfsense, or cycling power on either hardware device.

        Btw I'w running pfsense 2.5.2-RELEASE (amd64) under Proxmox 7.1-10 with all intel 211 NIC passed through to pfsense

        1 Reply Last reply Reply Quote 0
        • V
          viragomann @RyanM
          last edited by

          @ryanm
          The interface status shows that the DHCP server is down. So presumably the server didn't respond before.

          Possibly you can find hints in the DHCP log to see what's happening.

          GertjanG RyanMR 2 Replies Last reply Reply Quote 0
          • GertjanG
            Gertjan @viragomann
            last edited by

            @viragomann said in WAN does not renew after reboot:

            The interface status shows that the DHCP server is down. So presumably the server didn't respond before.

            That would be the DHCP server that serves an DHCPO lease to the WAN interface of pfSense.

            @RyanM does not have access to to that information.

            The DHCP server of pfSense (not shown neither) is totally not related to the DHCP client that executes on the WAN interface.

            @ryanm said in WAN does not renew after reboot:

            I have posted on this before (WAN interface does not renew after reboot),

            The issue mentioned over there has been solved ages ago.

            @RyanM : temporary, just for testing : put a switch in the middle of your WAN cable. This will protect your WAN interface from 'flapping' DOWN an UP, thus creating a normally environment for the DHCP to work.
            If a initial request fails, it will wait a bit.
            fails again ? Ok, It waits somewhat longer.
            Etc etc.
            If there is no working Ethernet connection, then, of course, DHCP client will finally bail out after a long period (several minutes ?). That's not a pfSense problem, but something mounted upstream.
            .

            No "help me" PM's please. Use the forum, the community will thank you.
            Edit : and where are the logs ??

            V 1 Reply Last reply Reply Quote 0
            • V
              viragomann @Gertjan
              last edited by

              @gertjan
              I was talking about the ISP DHCP server, of course. Since the WAN interface is configured for DHCP, pfSense doesn't run any server on WAN naturally.

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                It's linked at 100M, is that expected?

                1 Reply Last reply Reply Quote 0
                • RyanMR
                  RyanM @viragomann
                  last edited by

                  @viragomann and @Gertjan to setup this router, I just plugged it into a switch on the home network of where I am at now. It is a Google WiFi mesh, and so the Google WiFi node configured as the router is serving as the DHCP server. I don't know how to obtain those logs, but will look around.

                  @stephenw10, no, the 100M is not expected, but it might be the cable I used to plugin the router. The cable is from a Netgear ethernet-over-power adapter and the cable may only support 100M. For the time being I thought the cable would be fine to get this box setup.

                  My plan is to get it setup with a basic set of firewall rules, a VPN server, and possibly a dynamic DNS client so I can have my friend plug it in, boot it up, and then I can hopefully remote connect into it. Before I ship it out, I was planning on plugging it into the modem here and then trying to connect using a cellular hotspot. However, I am concerned it will get plugged in, boot, and then not pull an IP. I can try to explain to my friend how to connect to my home WiFi, login to my pfSense and click the "Renew" button, but I would really like this to just pull an IP automatically. My concern is that I was seeing this problem before with my ISP at that location, and now I am seeing it here plugged into a home network where no other device seems to have issues pulling an IP.

                  GertjanG 1 Reply Last reply Reply Quote 0
                  • GertjanG
                    Gertjan @RyanM
                    last edited by

                    @ryanm said in WAN does not renew after reboot:

                    I just plugged it into a switch on the home network of where I am at now

                    pfSense, on the "WAN side" behaves exactly like any other device on your LAN (PCs, phones, Tablets, camera, printer whatever, you name it) : put in the cable of the pfSense WAN in some LAN port, like a switch, and you get an IP from the upstream "Google Wfi DHCP server" in your case.

                    That is : the WAN of pfSense has to be setup as :

                    4273f433-2228-4d57-a45d-0da7f27a6d6b-image.png

                    and this is he default case.

                    @ryanm said in WAN does not renew after reboot:

                    no, the 100M is not expected,

                    It should be expected.
                    pfSense WAN is a 1Gb/sec NIC, but your switch is a 100Mbits/sec switch. So WAN is negotiated at 100. Not 1000.
                    If the witch was 1Gbit/sec ..... then you have an issue.

                    No "help me" PM's please. Use the forum, the community will thank you.
                    Edit : and where are the logs ??

                    RyanMR 1 Reply Last reply Reply Quote 0
                    • RyanMR
                      RyanM @Gertjan
                      last edited by

                      @gertjan the switch is a gigabit switch, so I will swap the cable and see if it changes to 1000M instead of 100M.

                      Yes, my WAN interface is configured to use DHCP. And it will pull an IP if I click the "Renew" button, but the issue is that it doesn't seem to automatically pull an IP when it boots.

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Yeah can try increasing the timeout values in the dhcp client advanced configuration options.

                        Steve

                        RyanMR 1 Reply Last reply Reply Quote 0
                        • RyanMR
                          RyanM @stephenw10
                          last edited by

                          @stephenw10 tried that, doesn't seem to help.

                          For some additional strangeness, after I reboot it doesn't have an IP on the WAN. I can "Renew" and it pulls an IP but I still don't have upstream connectivity.

                          If I go to the WAN interface and make a change and click "Apply", then I have upstream connectivity. This seems strange. I know I need to try this with the router plugged directly into the modem, but is there a reason this wouldn't work as a client on the Google WiFi network?

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Check the logs when you do that. What is actually happening? I imagine it relinks the WAN and pulls a new lease.

                            As long as the connected wifi bridge passes at layer 2 DHCP should work.

                            RyanMR 1 Reply Last reply Reply Quote 0
                            • RyanMR
                              RyanM @stephenw10
                              last edited by

                              @stephenw10 which log should I look at?

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                The dhcp and system logs.

                                RyanMR P 2 Replies Last reply Reply Quote 0
                                • RyanMR
                                  RyanM @stephenw10
                                  last edited by

                                  system.log since the last boot:

                                  Feb  4 11:39:29 router syslogd: kernel boot file is /boot/kernel/kernel
Feb  4 11:39:29 router kernel: pflog0: promiscuous mode disabled
Feb  4 11:39:29 router kernel: Waiting (max 60 seconds) for system process `vnlru' to stop... done
Feb  4 11:39:29 router kernel: Waiting (max 60 seconds) for system process `syncer' to stop...
Feb  4 11:39:29 router kernel: Syncing disks, vnodes remaining... 0 0 0 0 0 done
Feb  4 11:39:29 router kernel: Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Feb  4 11:39:29 router kernel: Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Feb  4 11:39:29 router kernel: Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Feb  4 11:39:29 router kernel: All buffers synced.
Feb  4 11:39:29 router kernel: Uptime: 23m21s
Feb  4 11:39:29 router kernel: ---<<BOOT>>---
Feb  4 11:39:29 router kernel: Copyright (c) 1992-2020 The FreeBSD Project.
Feb  4 11:39:29 router kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Feb  4 11:39:29 router kernel:  The Regents of the University of California. All rights reserved.
Feb  4 11:39:29 router kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Feb  4 11:39:29 router kernel: FreeBSD 12.2-STABLE fd0f54f44b5c(RELENG_2_5_0) pfSense amd64
Feb  4 11:39:29 router kernel: FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
Feb  4 11:39:29 router kernel: VT(vga): resolution 640x480
Feb  4 11:39:29 router kernel: CPU: Intel(R) Celeron(R) CPU  J3060  @ 1.60GHz (1600.04-MHz K8-class CPU)
Feb  4 11:39:29 router kernel:   Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
Feb  4 11:39:29 router kernel:   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Feb  4 11:39:29 router kernel:   Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
Feb  4 11:39:29 router kernel:   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
Feb  4 11:39:29 router kernel:   AMD Features2=0x101<LAHF,Prefetch>
Feb  4 11:39:29 router kernel:   Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
Feb  4 11:39:29 router kernel:   Structured Extended Features3=0xc000000<IBPB,STIBP>
Feb  4 11:39:29 router kernel:   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Feb  4 11:39:29 router kernel:   TSC: P-state invariant, performance statistics
Feb  4 11:39:29 router kernel: real memory  = 4294967296 (4096 MB)
Feb  4 11:39:29 router kernel: avail memory = 3994320896 (3809 MB)
Feb  4 11:39:29 router kernel: Event timer "LAPIC" quality 600
Feb  4 11:39:29 router kernel: ACPI APIC Table: <COREv4 COREBOOT>
Feb  4 11:39:29 router kernel: WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
Feb  4 11:39:29 router kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Feb  4 11:39:29 router kernel: FreeBSD/SMP: 1 package(s) x 2 core(s)
Feb  4 11:39:29 router kernel: arc4random: no preloaded entropy cache
Feb  4 11:39:29 router kernel: ioapic0 <Version 2.0> irqs 0-114 on motherboard
Feb  4 11:39:29 router kernel: Launching APs: 1
Feb  4 11:39:29 router kernel: Timecounter "TSC" frequency 1600039940 Hz quality 1000
Feb  4 11:39:29 router kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Feb  4 11:39:29 router kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
Feb  4 11:39:29 router kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Feb  4 11:39:29 router kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
Feb  4 11:39:29 router kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
Feb  4 11:39:29 router kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
Feb  4 11:39:29 router kernel: iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Feb  4 11:39:29 router kernel: iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
Feb  4 11:39:29 router kernel: iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Feb  4 11:39:29 router kernel: iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
Feb  4 11:39:29 router kernel: iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
Feb  4 11:39:29 router kernel: iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
Feb  4 11:39:29 router kernel: wlan: mac acl policy registered
Feb  4 11:39:29 router kernel: random: entropy device external interface
Feb  4 11:39:29 router kernel: module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
Feb  4 11:39:29 router kernel: kbd0 at kbdmux0
Feb  4 11:39:29 router kernel: random: registering fast source Intel Secure Key RNG
Feb  4 11:39:29 router kernel: random: fast provider: "Intel Secure Key RNG"
Feb  4 11:39:29 router kernel: [ath_hal] loaded
Feb  4 11:39:29 router kernel: 000.000054 [4336] netmap_init               netmap: loaded module
Feb  4 11:39:29 router kernel: mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
Feb  4 11:39:29 router kernel: nexus0
Feb  4 11:39:29 router kernel: vtvga0: <VT VGA driver> on motherboard
Feb  4 11:39:29 router kernel: cryptosoft0: <software crypto> on motherboard
Feb  4 11:39:29 router kernel: padlock0: No ACE support.
Feb  4 11:39:29 router kernel: acpi0: <COREv4 COREBOOT> on motherboard
Feb  4 11:39:29 router kernel: acpi0: Power Button (fixed)
Feb  4 11:39:29 router kernel: cpu0: <ACPI CPU> on acpi0
Feb  4 11:39:29 router kernel: atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Feb  4 11:39:29 router kernel: atrtc0: registered as a time-of-day clock, resolution 1.000000s
Feb  4 11:39:29 router kernel: Event timer "RTC" frequency 32768 Hz quality 0
Feb  4 11:39:29 router kernel: attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Feb  4 11:39:29 router kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Feb  4 11:39:29 router kernel: Event timer "i8254" frequency 1193182 Hz quality 100
Feb  4 11:39:29 router kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Feb  4 11:39:29 router kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
Feb  4 11:39:29 router kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Feb  4 11:39:29 router kernel: pci0: <ACPI PCI bus> on pcib0
Feb  4 11:39:29 router kernel: vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0
Feb  4 11:39:29 router kernel: vgapci0: Boot video device
Feb  4 11:39:29 router kernel: ahci0: <AHCI SATA controller> port 0x3040-0x305f mem 0xd1222000-0xd12227ff irq 19 at device 19.0 on pci0
Feb  4 11:39:29 router kernel: ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
Feb  4 11:39:29 router kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Feb  4 11:39:29 router kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
Feb  4 11:39:29 router kernel: xhci0: <Intel Braswell USB 3.0 controller> mem 0xd1200000-0xd120ffff irq 20 at device 20.0 on pci0
Feb  4 11:39:29 router kernel: xhci0: 32 bytes context size, 64-bit DMA
Feb  4 11:39:29 router kernel: usbus0 on xhci0
Feb  4 11:39:29 router kernel: usbus0: 5.0Gbps Super Speed USB v3.0
Feb  4 11:39:29 router kernel: pci0: <base peripheral, DMA controller> at device 24.0 (no driver attached)
Feb  4 11:39:29 router kernel: pci0: <serial bus> at device 24.1 (no driver attached)
Feb  4 11:39:29 router kernel: pci0: <serial bus> at device 24.2 (no driver attached)
Feb  4 11:39:29 router kernel: hdac0: <Intel Braswell HDA Controller> mem 0xd1214000-0xd1217fff irq 22 at device 27.0 on pci0
Feb  4 11:39:29 router kernel: pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
Feb  4 11:39:29 router kernel: pci1: <PCI bus> on pcib1
Feb  4 11:39:29 router kernel: igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x1000-0x101f mem 0xd1000000-0xd101ffff,0xd1020000-0xd1023fff irq 16 at device 0.0 on pci1
Feb  4 11:39:29 router kernel: igb0: Using 1024 TX descriptors and 1024 RX descriptors
Feb  4 11:39:29 router kernel: igb0: Using 2 RX queues 2 TX queues
Feb  4 11:39:29 router kernel: igb0: Using MSI-X interrupts with 3 vectors
Feb  4 11:39:29 router kernel: igb0: Ethernet address: 00:e0:67:2a:73:e0
Feb  4 11:39:29 router kernel: igb0: netmap queues/slots: TX 2/1024, RX 2/1024
Feb  4 11:39:29 router kernel: pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
Feb  4 11:39:29 router kernel: pci2: <PCI bus> on pcib2
Feb  4 11:39:29 router kernel: igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0x2000-0x201f mem 0xd1100000-0xd111ffff,0xd1120000-0xd1123fff irq 16 at device 0.0 on pci2
Feb  4 11:39:29 router kernel: igb1: Using 1024 TX descriptors and 1024 RX descriptors
Feb  4 11:39:29 router kernel: igb1: Using 2 RX queues 2 TX queues
Feb  4 11:39:29 router kernel: igb1: Using MSI-X interrupts with 3 vectors
Feb  4 11:39:29 router kernel: igb1: Ethernet address: 00:e0:67:2a:73:e1
Feb  4 11:39:29 router kernel: igb1: netmap queues/slots: TX 2/1024, RX 2/1024
Feb  4 11:39:29 router kernel: pci0: <base peripheral, DMA controller> at device 30.0 (no driver attached)
Feb  4 11:39:29 router kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Feb  4 11:39:29 router kernel: isa0: <ISA bus> on isab0
Feb  4 11:39:29 router kernel: acpi_button0: <Power Button> on acpi0
Feb  4 11:39:29 router kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Feb  4 11:39:29 router kernel: orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
Feb  4 11:39:29 router kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Feb  4 11:39:29 router kernel: ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
Feb  4 11:39:29 router kernel:             to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
Feb  4 11:39:29 router kernel: ZFS filesystem version: 5
Feb  4 11:39:29 router kernel: ZFS storage pool version: features support (5000)
Feb  4 11:39:29 router kernel: Timecounters tick every 1.000 msec
Feb  4 11:39:29 router kernel: arc4random: no preloaded entropy cache
Feb  4 11:39:29 router kernel: hdacc0: <Realtek ALC662 rev1 HDA CODEC> at cad 0 on hdac0
Feb  4 11:39:29 router kernel: hdaa0: <Realtek ALC662 rev1 Audio Function Group> at nid 1 on hdacc0
Feb  4 11:39:29 router kernel: pcm0: <Realtek ALC662 rev1 (Analog 5.1+HP/2.0)> at nid 20,22,21,27 and 24,26 on hdaa0
Feb  4 11:39:29 router kernel: pcm1: <Realtek ALC662 rev1 (Rear Digital)> at nid 30 on hdaa0
Feb  4 11:39:29 router kernel: pcm2: <Realtek ALC662 rev1 (Front Analog Mic)> at nid 25 on hdaa0
Feb  4 11:39:29 router kernel: hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
Feb  4 11:39:29 router kernel: hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
Feb  4 11:39:29 router kernel: hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
Feb  4 11:39:29 router kernel: hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Feb  4 11:39:29 router kernel: Trying to mount root from zfs:pfSense/ROOT/default []...
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM usbus0
Feb  4 11:39:29 router kernel: ugen0.1: <0x8086 XHCI root HUB> at usbus0
Feb  4 11:39:29 router kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Feb  4 11:39:29 router kernel: uhub0: 13 ports with 13 removable, self powered
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM usbus0
Feb  4 11:39:29 router kernel: ugen0.2: <vendor 0x1a40 USB 2.0 Hub MTT> at usbus0
Feb  4 11:39:29 router kernel: uhub1 on uhub0
Feb  4 11:39:29 router kernel: uhub1: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Feb  4 11:39:29 router kernel: uhub1: MTT enabled
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM usbus0
Feb  4 11:39:29 router kernel: uhub1: 4 ports with 4 removable, self powered
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: Root mount waiting for: CAM
Feb  4 11:39:29 router kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Feb  4 11:39:29 router kernel: ada0: <Protectli 64GB mSATA SBFM61.3> ACS-4 ATA SATA 3.x device
Feb  4 11:39:29 router kernel: ada0: Serial Number A46207191B8900572407
Feb  4 11:39:29 router kernel: ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Feb  4 11:39:29 router kernel: ada0: Command Queueing enabled
Feb  4 11:39:29 router kernel: ada0: 61057MB (125045424 512 byte sectors)
Feb  4 11:39:29 router kernel: random: unblocking device.
Feb  4 11:39:29 router kernel: CPU: Intel(R) Celeron(R) CPU  J3060  @ 1.60GHz (1600.04-MHz K8-class CPU)
Feb  4 11:39:29 router kernel:   Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
Feb  4 11:39:29 router kernel:   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Feb  4 11:39:29 router kernel:   Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
Feb  4 11:39:29 router kernel:   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
Feb  4 11:39:29 router kernel:   AMD Features2=0x101<LAHF,Prefetch>
Feb  4 11:39:29 router kernel:   Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
Feb  4 11:39:29 router kernel:   Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
Feb  4 11:39:29 router kernel:   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Feb  4 11:39:29 router kernel:   TSC: P-state invariant, performance statistics
Feb  4 11:39:29 router kernel: ig4iic0: <Intel Braswell Serial I/O I2C Port 1> mem 0xd121d000-0xd121dfff,0xd121e000-0xd121efff irq 19 at device 24.1 on pci0
Feb  4 11:39:29 router kernel: ig4iic0: Using MSI
Feb  4 11:39:29 router kernel: iicbus0: <Philips I2C bus> on ig4iic0
Feb  4 11:39:29 router kernel: ig4iic1: <Intel Braswell Serial I/O I2C Port 2> mem 0xd121f000-0xd121ffff,0xd1220000-0xd1220fff irq 18 at device 24.2 on pci0
Feb  4 11:39:29 router kernel: ig4iic1: Using MSI
Feb  4 11:39:29 router kernel: iicbus1: <Philips I2C bus> on ig4iic1
Feb  4 11:39:29 router kernel: lo0: link state changed to UP
Feb  4 11:39:30 router sshd[7864]: Server listening on :: port 22.
Feb  4 11:39:30 router sshd[7864]: Server listening on 0.0.0.0 port 22.
Feb  4 11:39:41 router php[392]: rc.bootup: The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf igb0 > /tmp/igb0_output 2> /tmp/igb0_error_output' returned exit code '1', the output was ''
Feb  4 11:39:41 router kernel: done.
Feb  4 11:39:41 router php[392]: rc.bootup: Resyncing OpenVPN instances.
Feb  4 11:39:41 router kernel: done.
Feb  4 11:39:41 router kernel: pflog0: promiscuous mode enabled
Feb  4 11:39:42 router php[392]: rc.bootup: Gateway, none 'available' for inet, use the first one configured. ''
Feb  4 11:39:42 router kernel: .done.
Feb  4 11:39:42 router kernel: done.
Feb  4 11:39:42 router php[392]: rc.bootup: Gateway, none 'available' for inet6, use the first one configured. ''
Feb  4 11:39:42 router kernel: done.
Feb  4 11:39:42 router php[392]: rc.bootup: sync unbound done.
Feb  4 11:39:42 router kernel: done.
Feb  4 11:39:43 router kernel: done.
Feb  4 11:39:43 router php[392]: rc.bootup: NTPD is starting up.
Feb  4 11:39:43 router kernel: done.
Feb  4 11:39:43 router kernel: done.
Feb  4 11:39:43 router check_reload_status[374]: Updating all dyndns
Feb  4 11:39:44 router kernel: ....
Feb  4 11:39:44 router check_reload_status[374]: Linkup starting igb0
Feb  4 11:39:44 router kernel:
Feb  4 11:39:44 router kernel: igb0: link state changed to UP
Feb  4 11:39:44 router php[392]: rc.bootup: The command '/usr/local/sbin/strongswanrc stop' returned exit code '1', the output was 'strongswan not running? (check /var/run/daemon-charon.pid).'
Feb  4 11:39:45 router check_reload_status[374]: Linkup starting igb1
Feb  4 11:39:45 router kernel: igb1: link state changed to UP
Feb  4 11:39:48 router php[392]: rc.bootup: Creating rrd update script
Feb  4 11:39:48 router kernel: done.
Feb  4 11:39:48 router root[86666]: /etc/rc.d/hostid: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
Feb  4 11:39:51 router syslogd: exiting on signal 15
Feb  4 11:39:51 router syslogd: kernel boot file is /boot/kernel/kernel
Feb  4 11:39:51 router kernel: done.
Feb  4 11:39:51 router php-fpm[345]: /rc.start_packages: Restarting/Starting all packages.
Feb  4 11:39:51 router root[10534]: Bootup complete
Feb  4 11:39:52 router login[14916]: login on ttyv0 as root
Feb  4 12:08:05 router php-fpm[345]: /index.php: Successful login for user 'admin' from: 192.168.1.100 (Local Database)
Feb  4 12:08:11 router sshd[68729]: Accepted publickey for rmccullough from 192.168.1.100 port 55833 ssh2: RSA SHA256:P7JW/dxUNDodWSlM+LIzypz1ziIzoYUDbN04rA99a3o
Feb  4 12:08:50 router check_reload_status[374]: rc.newwanip starting igb0
Feb  4 12:08:52 router php-fpm[80083]: /rc.newwanip: rc.newwanip: Info: starting on igb0.
Feb  4 12:08:52 router php-fpm[80083]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.86.241) (interface: WAN[wan]) (real interface: igb0).
Feb  4 12:08:52 router check_reload_status[374]: Reloading filter
Feb  4 12:11:07 router check_reload_status[374]: Syncing firewall
Feb  4 12:11:07 router php-fpm[345]: /interfaces.php: Beginning configuration backup to https://acb.netgate.com/save
Feb  4 12:11:07 router php-fpm[345]: /interfaces.php: End of configuration backup to https://acb.netgate.com/save (success).
Feb  4 12:11:13 router php-fpm[345]: /interfaces.php: Shutting down Router Advertisment daemon cleanly
Feb  4 12:11:13 router check_reload_status[374]: rc.newwanip starting igb0
Feb  4 12:11:13 router php-fpm[345]: /interfaces.php: Default gateway setting Interface WAN_DHCP Gateway as default.
Feb  4 12:11:13 router php-fpm[345]: /interfaces.php: Gateway, none 'available' for inet6, use the first one configured. ''
Feb  4 12:11:13 router check_reload_status[374]: Restarting ipsec tunnels
Feb  4 12:11:14 router php-fpm[80083]: /rc.newwanip: rc.newwanip: Info: starting on igb0.
Feb  4 12:11:14 router php-fpm[80083]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.86.241) (interface: WAN[wan]) (real interface: igb0).
Feb  4 12:11:14 router check_reload_status[374]: Reloading filter
Feb  4 12:11:18 router check_reload_status[374]: updating dyndns wan
Feb  4 12:11:20 router check_reload_status[374]: Reloading filter
Feb  4 12:11:20 router php-fpm[345]: /interfaces.php: Creating rrd update script
Feb  4 12:12:14 router sshd[64915]: Accepted publickey for rmccullough from 192.168.1.100 port 55956 ssh2: RSA SHA256:P7JW/dxUNDodWSlM+LIzypz1ziIzoYUDbN04rA99a3o
Feb  4 12:12:48 router sshd[68955]: Timeout, client not responding from user rmccullough 192.168.1.100 port 55833
Feb  4 12:51:19 router check_reload_status[374]: Linkup starting igb1
Feb  4 12:51:19 router kernel: igb1: link state changed to DOWN
Feb  4 12:51:20 router php-fpm[345]: /rc.linkup: DEVD Ethernet detached event for lan
Feb  4 12:51:20 router check_reload_status[374]: Reloading filter
Feb  4 12:51:22 router check_reload_status[374]: Linkup starting igb1
Feb  4 12:51:22 router kernel: igb1: link state changed to UP
Feb  4 12:51:23 router php-fpm[344]: /rc.linkup: DEVD Ethernet attached event for lan
Feb  4 12:51:23 router php-fpm[344]: /rc.linkup: HOTPLUG: Configuring interface lan
Feb  4 12:51:23 router php-fpm[344]: /rc.linkup: Gateway, none 'available' for inet6, use the first one configured. ''
Feb  4 12:51:23 router check_reload_status[374]: Restarting ipsec tunnels
Feb  4 12:51:28 router check_reload_status[374]: updating dyndns lan
Feb  4 12:51:28 router check_reload_status[374]: Reloading filter
Feb  4 12:51:52 router sshd[65253]: Timeout, client not responding from user rmccullough 192.168.1.100 port 55956
Feb  4 13:01:19 router check_reload_status[374]: Linkup starting igb1
Feb  4 13:01:19 router kernel: igb1: link state changed to DOWN
Feb  4 13:01:20 router php-fpm[80083]: /rc.linkup: DEVD Ethernet detached event for lan
Feb  4 13:01:20 router check_reload_status[374]: Reloading filter
Feb  4 13:01:24 router check_reload_status[374]: Linkup starting igb1
Feb  4 13:01:24 router kernel: igb1: link state changed to UP
Feb  4 13:01:25 router php-fpm[344]: /rc.linkup: DEVD Ethernet attached event for lan
Feb  4 13:01:25 router php-fpm[344]: /rc.linkup: HOTPLUG: Configuring interface lan
Feb  4 13:01:26 router php-fpm[344]: /rc.linkup: Gateway, none 'available' for inet6, use the first one configured. ''
Feb  4 13:01:26 router check_reload_status[374]: Restarting ipsec tunnels
Feb  4 13:01:30 router check_reload_status[374]: updating dyndns lan
Feb  4 13:01:30 router check_reload_status[374]: Reloading filter
Feb  4 13:02:07 router sshd[81950]: Accepted publickey for rmccullough from 192.168.1.100 port 62887 ssh2: RSA SHA256:P7JW/dxUNDodWSlM+LIzypz1ziIzoYUDbN04rA99a3o
Feb  4 13:02:54 router check_reload_status[374]: Syncing firewall
Feb  4 13:02:54 router php-fpm[80083]: /pkg_mgr_install.php: Beginning configuration backup to https://acb.netgate.com/save
Feb  4 13:02:57 router php-fpm[80083]: /pkg_mgr_install.php: End of configuration backup to https://acb.netgate.com/save (success).
Feb  4 13:03:07 router pkg-static[38878]: sudo-1.9.7 installed
Feb  4 13:03:07 router php[55709]: /etc/rc.packages: Beginning package installation for sudo .
Feb  4 13:03:07 router check_reload_status[374]: Syncing firewall
Feb  4 13:03:07 router php[55709]: /etc/rc.packages: Beginning configuration backup to https://acb.netgate.com/save
Feb  4 13:03:10 router php[55709]: /etc/rc.packages: End of configuration backup to https://acb.netgate.com/save (success).
Feb  4 13:03:10 router check_reload_status[374]: Syncing firewall
Feb  4 13:03:10 router php[55709]: /etc/rc.packages: Beginning configuration backup to https://acb.netgate.com/save
Feb  4 13:03:13 router php[55709]: /etc/rc.packages: End of configuration backup to https://acb.netgate.com/save (success).
Feb  4 13:03:13 router php[55709]: /etc/rc.packages: Successfully installed package: sudo.
Feb  4 13:03:13 router pkg-static[38878]: pfSense-pkg-sudo-0.3_6 installed
Feb  4 13:03:15 router check_reload_status[374]: Reloading filter
Feb  4 13:03:15 router check_reload_status[374]: Starting packages
Feb  4 13:03:16 router php-fpm[344]: /rc.start_packages: Restarting/Starting all packages.
Feb  4 13:03:20 router sshd[82599]: Received disconnect from 192.168.1.100 port 62887:11: disconnected by user
Feb  4 13:03:20 router sshd[82599]: Disconnected from user rmccullough 192.168.1.100 port 62887
Feb  4 13:03:20 router sshd[93362]: Accepted publickey for rmccullough from 192.168.1.100 port 62917 ssh2: RSA SHA256:P7JW/dxUNDodWSlM+LIzypz1ziIzoYUDbN04rA99a3o
Feb  4 13:03:36 router sudo[20632]: rmccullough : TTY=pts/0 ; PWD=/var/log ; USER=root ; COMMAND=/bin/cat system.log
                                  RyanMR GertjanG 2 Replies Last reply Reply Quote 0
                                  • RyanMR
                                    RyanM @RyanM
                                    last edited by

                                    dhcp.log since last boot:

                                    Feb  4 11:39:29 router dhclient[6882]: Cannot open or create pidfile: No such file or directory
Feb  4 11:39:43 router dhcpd[56120]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 11:39:43 router dhcpd[56120]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 11:39:43 router dhcpd[56120]: All rights reserved.
Feb  4 11:39:43 router dhcpd[56120]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 11:39:43 router dhcpd[56120]: Config file: /etc/dhcpd.conf
Feb  4 11:39:43 router dhcpd[56120]: Database file: /var/db/dhcpd.leases
Feb  4 11:39:43 router dhcpd[56120]: PID file: /var/run/dhcpd.pid
Feb  4 11:39:43 router dhcpd[56120]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 11:39:43 router dhcpd[56120]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 11:39:43 router dhcpd[56120]: All rights reserved.
Feb  4 11:39:43 router dhcpd[56120]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 11:39:43 router dhcpd[56120]: Wrote 0 class decls to leases file.
Feb  4 11:39:43 router dhcpd[56120]: Wrote 2 leases to leases file.
Feb  4 11:39:43 router dhcpd[56120]: Listening on BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 11:39:43 router dhcpd[56120]: Sending on   BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 11:39:43 router dhcpd[56120]: Sending on   Socket/fallback/fallback-net
Feb  4 11:39:43 router dhcpd[56120]: Server starting service.
Feb  4 11:39:45 router dhcpd[56120]: reuse_lease: lease age 1437 (secs) under 25% threshold, reply with unaltered, existing lease for 192.168.1.100
Feb  4 11:39:45 router dhcpd[56120]: DHCPDISCOVER from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 11:39:45 router dhcpd[56120]: DHCPOFFER on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 11:39:45 router dhcpd[56120]: send_packet: Network is down
Feb  4 11:39:45 router dhcpd[56120]: dhcp.c:4164: Failed to send 300 byte long packet over igb1 interface.
Feb  4 11:39:50 router dhcpd[56120]: reuse_lease: lease age 1442 (secs) under 25% threshold, reply with unaltered, existing lease for 192.168.1.100
Feb  4 11:39:50 router dhcpd[56120]: DHCPDISCOVER from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 11:39:50 router dhcpd[56120]: DHCPOFFER on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 11:39:50 router dhcpd[56120]: reuse_lease: lease age 1442 (secs) under 25% threshold, reply with unaltered, existing lease for 192.168.1.100
Feb  4 11:39:50 router dhcpd[56120]: DHCPREQUEST for 192.168.1.100 (192.168.1.1) from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 11:39:50 router dhcpd[56120]: DHCPACK on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 12:08:50 router dhclient[92418]: Cannot open or create pidfile: No such file or directory
Feb  4 12:08:50 router dhclient[92626]: PREINIT
Feb  4 12:08:50 router dhclient[92418]: DHCPREQUEST on igb0 to 255.255.255.255 port 67
Feb  4 12:08:50 router dhclient[92418]: DHCPACK from 192.168.86.1
Feb  4 12:08:50 router dhclient[93585]: REBOOT
Feb  4 12:08:50 router dhclient[94220]: Starting add_new_address()
Feb  4 12:08:50 router dhclient[94449]: ifconfig igb0 inet 192.168.86.241 netmask 255.255.255.0 broadcast 192.168.86.255
Feb  4 12:08:50 router dhclient[94803]: New IP Address (igb0): 192.168.86.241
Feb  4 12:08:50 router dhclient[94964]: New Subnet Mask (igb0): 255.255.255.0
Feb  4 12:08:50 router dhclient[94994]: New Broadcast Address (igb0): 192.168.86.255
Feb  4 12:08:50 router dhclient[95336]: New Routers (igb0): 192.168.86.1
Feb  4 12:08:50 router dhclient[95413]: Adding new routes to interface: igb0
Feb  4 12:08:50 router dhclient[95557]: Creating resolv.conf
Feb  4 12:08:50 router dhclient[92418]: bound to 192.168.86.241 -- renewal in 43200 seconds.
Feb  4 12:11:11 router dhclient[93241]: connection closed
Feb  4 12:11:11 router dhclient[93241]: exiting.
Feb  4 12:11:13 router dhclient[31635]: Cannot open or create pidfile: No such file or directory
Feb  4 12:11:13 router dhclient[32181]: PREINIT
Feb  4 12:11:13 router dhclient[31635]: DHCPREQUEST on igb0 to 255.255.255.255 port 67
Feb  4 12:11:13 router dhclient[31635]: DHCPACK from 192.168.86.1
Feb  4 12:11:13 router dhclient[32933]: REBOOT
Feb  4 12:11:13 router dhclient[33429]: Starting add_new_address()
Feb  4 12:11:13 router dhclient[33433]: ifconfig igb0 inet 192.168.86.241 netmask 255.255.255.0 broadcast 192.168.86.255
Feb  4 12:11:13 router dhclient[33864]: New IP Address (igb0): 192.168.86.241
Feb  4 12:11:13 router dhclient[34070]: New Subnet Mask (igb0): 255.255.255.0
Feb  4 12:11:13 router dhclient[34073]: New Broadcast Address (igb0): 192.168.86.255
Feb  4 12:11:13 router dhclient[34083]: New Routers (igb0): 192.168.86.1
Feb  4 12:11:13 router dhclient[34362]: Adding new routes to interface: igb0
Feb  4 12:11:13 router dhclient[34542]: Creating resolv.conf
Feb  4 12:11:13 router dhclient[31635]: bound to 192.168.86.241 -- renewal in 43200 seconds.
Feb  4 12:11:17 router dhcpd[90751]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 12:11:17 router dhcpd[90751]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 12:11:17 router dhcpd[90751]: All rights reserved.
Feb  4 12:11:17 router dhcpd[90751]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 12:11:17 router dhcpd[90751]: Config file: /etc/dhcpd.conf
Feb  4 12:11:17 router dhcpd[90751]: Database file: /var/db/dhcpd.leases
Feb  4 12:11:17 router dhcpd[90751]: PID file: /var/run/dhcpd.pid
Feb  4 12:11:17 router dhcpd[90751]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 12:11:17 router dhcpd[90751]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 12:11:17 router dhcpd[90751]: All rights reserved.
Feb  4 12:11:17 router dhcpd[90751]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 12:11:17 router dhcpd[90751]: Wrote 0 class decls to leases file.
Feb  4 12:11:17 router dhcpd[90751]: Wrote 2 leases to leases file.
Feb  4 12:11:17 router dhcpd[90751]: Listening on BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 12:11:17 router dhcpd[90751]: Sending on   BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 12:11:17 router dhcpd[90751]: Sending on   Socket/fallback/fallback-net
Feb  4 12:11:17 router dhcpd[90751]: Server starting service.
Feb  4 12:12:05 router dhcpd[90751]: DHCPRELEASE of 192.168.1.100 from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1 (found)
Feb  4 12:12:07 router dhcpd[90751]: DHCPDISCOVER from c4:34:6b:7b:3c:45 via igb1
Feb  4 12:12:08 router dhcpd[90751]: DHCPOFFER on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 12:12:08 router dhcpd[90751]: DHCPREQUEST for 192.168.1.100 (192.168.1.1) from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 12:12:08 router dhcpd[90751]: DHCPACK on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 12:51:17 router dhcpd[90751]: DHCPREQUEST for 192.168.1.100 from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 12:51:17 router dhcpd[90751]: DHCPACK on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 12:51:27 router dhcpd[42633]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 12:51:27 router dhcpd[42633]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 12:51:27 router dhcpd[42633]: All rights reserved.
Feb  4 12:51:27 router dhcpd[42633]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 12:51:27 router dhcpd[42633]: Config file: /etc/dhcpd.conf
Feb  4 12:51:27 router dhcpd[42633]: Database file: /var/db/dhcpd.leases
Feb  4 12:51:27 router dhcpd[42633]: PID file: /var/run/dhcpd.pid
Feb  4 12:51:27 router dhcpd[42633]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 12:51:27 router dhcpd[42633]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 12:51:27 router dhcpd[42633]: All rights reserved.
Feb  4 12:51:27 router dhcpd[42633]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 12:51:27 router dhcpd[42633]: Wrote 0 class decls to leases file.
Feb  4 12:51:27 router dhcpd[42633]: Wrote 2 leases to leases file.
Feb  4 12:51:27 router dhcpd[42633]: Listening on BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 12:51:27 router dhcpd[42633]: Sending on   BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 12:51:27 router dhcpd[42633]: Sending on   Socket/fallback/fallback-net
Feb  4 12:51:27 router dhcpd[42633]: Server starting service.
Feb  4 13:01:24 router dhcpd[42633]: reuse_lease: lease age 607 (secs) under 25% threshold, reply with unaltered, existing lease for 192.168.1.100
Feb  4 13:01:24 router dhcpd[42633]: DHCPREQUEST for 192.168.1.100 from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 13:01:24 router dhcpd[42633]: DHCPACK on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 13:01:24 router dhcpd[42633]: send_packet: Network is down
Feb  4 13:01:24 router dhcpd[42633]: dhcp.c:4164: Failed to send 300 byte long packet over igb1 interface.
Feb  4 13:01:25 router dhcpd[42633]: reuse_lease: lease age 608 (secs) under 25% threshold, reply with unaltered, existing lease for 192.168.1.100
Feb  4 13:01:25 router dhcpd[42633]: DHCPREQUEST for 192.168.1.100 from c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 13:01:25 router dhcpd[42633]: DHCPACK on 192.168.1.100 to c4:34:6b:7b:3c:45 (DESKTOP-C3FT4J9) via igb1
Feb  4 13:01:29 router dhcpd[16802]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 13:01:29 router dhcpd[16802]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 13:01:29 router dhcpd[16802]: All rights reserved.
Feb  4 13:01:29 router dhcpd[16802]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 13:01:29 router dhcpd[16802]: Config file: /etc/dhcpd.conf
Feb  4 13:01:29 router dhcpd[16802]: Database file: /var/db/dhcpd.leases
Feb  4 13:01:29 router dhcpd[16802]: PID file: /var/run/dhcpd.pid
Feb  4 13:01:29 router dhcpd[16802]: Internet Systems Consortium DHCP Server 4.4.2-P1
Feb  4 13:01:29 router dhcpd[16802]: Copyright 2004-2021 Internet Systems Consortium.
Feb  4 13:01:29 router dhcpd[16802]: All rights reserved.
Feb  4 13:01:29 router dhcpd[16802]: For info, please visit https://www.isc.org/software/dhcp/
Feb  4 13:01:29 router dhcpd[16802]: Wrote 0 class decls to leases file.
Feb  4 13:01:29 router dhcpd[16802]: Wrote 2 leases to leases file.
Feb  4 13:01:29 router dhcpd[16802]: Listening on BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 13:01:29 router dhcpd[16802]: Sending on   BPF/igb1/00:e0:67:2a:73:e1/192.168.1.0/24
Feb  4 13:01:29 router dhcpd[16802]: Sending on   Socket/fallback/fallback-net
Feb  4 13:01:29 router dhcpd[16802]: Server starting service.
                                    bingo600B 1 Reply Last reply Reply Quote 0
                                    • bingo600B
                                      bingo600 @RyanM
                                      last edited by

                                      @ryanm

                                      The below log "smell's a lot like my issue.
                                      Seems like IGB0 (Wan ethernet is not ready) when the DHCP client runs.
                                      And the DHCP client exits ....

                                      
***  Boot
Feb  4 11:39:29 router syslogd: kernel boot file is /boot/kernel/kernel
..
..
*** DHCP client exits (Prob because IGB0 is not ready)
Feb  4 11:39:41 router php[392]: rc.bootup: The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf igb0 > /tmp/igb0_output 2> /tmp/igb0_error_output' returned exit code '1', the output was ''
..
..
*** IGBo Becomes ready
Feb  4 11:39:44 router check_reload_status[374]: Linkup starting igb0
Feb  4 11:39:44 router kernel:
Feb  4 11:39:44 router kernel: igb0: link state changed to UP
..
..

******* Here it seems you are loggin in , and "kicking wan DHCP"

Feb  4 11:39:52 router login[14916]: login on ttyv0 as root
Feb  4 12:08:05 router php-fpm[345]: /index.php: Successful login for user 'admin' from: 192.168.1.100 (Local Database)
Feb  4 12:08:11 router sshd[68729]: Accepted publickey for rmccullough from 192.168.1.100 port 55833 ssh2: RSA SHA256:P7JW/dxUNDodWSlM+LIzypz1ziIzoYUDbN04rA99a3o
Feb  4 12:08:50 router check_reload_status[374]: rc.newwanip starting igb0
Feb  4 12:08:52 router php-fpm[80083]: /rc.newwanip: rc.newwanip: Info: starting on igb0.
Feb  4 12:08:52 router php-fpm[80083]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.86.241) (interface: WAN[wan]) (real interface: igb0).
Feb  4 12:08:52 router check_reload_status[374]: Reloading filter
Feb  4 12:11:07 router check_reload_status[374]: Syncing firewall
Feb  4 12:11:07 router php-fpm[345]: /interfaces.php: Beginning configuration backup to https://acb.netgate.com/save
Feb  4 12:11:07 router php-fpm[345]: /interfaces.php: End of configuration backup to https://acb.netgate.com/save (success).
Feb  4 12:11:13 router php-fpm[345]: /interfaces.php: Shutting down Router Advertisment daemon cleanly
Feb  4 12:11:13 router check_reload_status[374]: rc.newwanip starting igb0
Feb  4 12:11:13 router php-fpm[345]: /interfaces.php: Default gateway setting Interface WAN_DHCP Gateway as default.
Feb  4 12:11:13 router php-fpm[345]: /interfaces.php: Gateway, none 'available' for inet6, use the first one configured. ''
Feb  4 12:11:13 router check_reload_status[374]: Restarting ipsec tunnels
Feb  4 12:11:14 router php-fpm[80083]: /rc.newwanip: rc.newwanip: Info: starting on igb0.
Feb  4 12:11:14 router php-fpm[80083]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.86.241) (interface: WAN[wan]) (real interface: igb0).
...
...

                                      My issue was only present when there was a power failure.

                                      Where my ISP router was slower to start than the pfSense , so the Wan interface on the ISP router wasn't ready , when pfSense wanted an ip address.

                                      I "cheated" , and set a static address instead.

                                      /Bingo

                                      If you find my answer useful - Please give the post a šŸ‘ - "thumbs up"

                                      pfSense+ 23.05.1 (ZFS)

                                      QOTOM-Q355G4 Quad Lan.
                                      CPUĀ  : Core i5 5250U, Ram : 8GB Kingston DDR3LV 1600
                                      LANĀ  : 4 x Intel 211, DiskĀ  : 240G SAMSUNG MZ7L3240HCHQ SSD

                                      RyanMR P 2 Replies Last reply Reply Quote 1
                                      • RyanMR
                                        RyanM @bingo600
                                        last edited by

                                        @bingo600 Not sure I can use a static IP for my ISP back home. I could try it here though and see what happens. No power issue in my scenario. I reboot the router and it doesn't pull an IP from my Google WiFi network. Will try plugging directly into the modem, but not sure it will make a difference.

                                        bingo600B 1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          How exactly is it connected? Just to the main router or via some wifi bridge/extension?

                                          RyanMR 1 Reply Last reply Reply Quote 0
                                          • P
                                            Patch @bingo600
                                            last edited by

                                            @bingo600 said in WAN does not renew after reboot:

                                            My issue was only present when there was a power failure.
                                            Where my ISP router was slower to start than the pfSense , so the Wan interface on the ISP router wasn't ready , when pfSense wanted an ip address.

                                            Agree
                                            I think the problem is if pfsense can not contact the ISP DHCP on the WAN interface, it assumes it has a lease and never tries to contact the ISP DHCP server again. This leave pfsense in an erroneous state.

                                            The only solution for which involves external user intervention to force a WAN lease negotiation.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.