System Information, missing some CPU info after upgrade to 2.6.0

viktor_g

seems related to sysctl

Please show the sysctl dev.cpu.0.freq and sysctl dev.cpu.0.freq_levels before/after powerd switching

jimp

@ciscox said in System Information, missing some CPU info after upgrade to 2.6.0:

But when I change the PowerD from Adaptive to Hiadaptive the line Current: 800 Mhz. Max: 2200 Mhz disappear. Change back to Adaptive the line is back :)

The widget only shows that line if current != max. So if it disappears the most likely reason is that the clock speed is at max when you are looking at the widget.

MoonKnight

@viktor_g
Hi.
I can see in the Hiadaptive, my CPU speed is locked at 2200 Mhz?? hmm

Adaptive:

sysctl dev.cpu.0.freq:
dev.cpu.0.freq: 800

sysctl dev.cpu.0.freq_levels;
dev.cpu.0.freq_levels: 2200/35000 2100/32872 2000/30787 1900/29082 1800/27075 1700/25440 1600/23510 1500/21943 1400/20090 1300/18591 1200/16812 1100/15380 1000/13674 900/12007 800/10674

Hiadaptive:

sysctl dev.cpu.0.freq:
dev.cpu.0.freq: 2200

sysctl dev.cpu.0.freq_levels:
dev.cpu.0.freq_levels: 2200/35000 2100/32872 2000/30787 1900/29082 1800/27075 1700/25440 1600/23510 1500/21943 1400/20090 1300/18591 1200/16812 1100/15380 1000/13674 900/12007 800/10674

slu

Same isse here:

Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz
Current: 1400 MHz, Max: 3001 MHz
4 CPUs:
AES-NI CPU Crypto: Yes (active)
QAT Crypto: No

MikeV7896

Not sure if related, but I'm seeing a bunch of different info appearing and disappearing from the System Information section of the dashboard. It seems to appear/disappear with the speed value. Sections affected are...

Uptime
Current date/time
State table size
MBUF Usage (bar remains, values disappear)
Temperature (bar remains, values disappear)
Load average
Memory usage (bar remains, values disappear)

Two screenshots showing the info missing and visible. Yes, I cleared my browser cache. It's happening on multiple computers. And this was also happening on 2.6.0 before I upgraded to Plus.

MikeV7896

After modifying and saving items being displayed in that dashboard widget, everything now appears to be normal.

MoonKnight

@mikev7896

Hi, that's weird.
In my case, the CPU speed line disappears when I use Hiadaptive in the PowerD. It never comes back, and it seems like my CPU hit max speed when using Hiadaptive. Change back to Adaptive, everything seems to be normal, and yes the cpu speed disappears when my cpu hits max speed, but it comes back when the system Is idle.

MoonKnight

@slu

I think your 4 CPU: line will appear after a reboot of your pfsense box. :)

jimp

The CPU frequency coming and going is normal and wouldn't be related to anything else coming up blank.

That is all driven by JavaScript and if it breaks the most likely cause is something in the browser, such as an ad or script blocker kicking in. It's possible there is a bug there but it's less likely.

If you can reproduce the fields being blank at will, then open the browser's debug console (usually F12 or Ctrl+Shift+I then console tab, or Ctrl+Shift+J) and see if there are any JavaScript errors when the fields are empty.

MoonKnight

@jimp

I understand the empty CPU frequency is coming and going when the CPU is working at full speed on Adaptive PowerD mode.
But, when I use Hiadaptive, my CPU stays at full speed all the time, that's why I have now CPU frequency.