22.01 Reinstall goes wrong
-
@stephenw10 My output is 1b6998c83988bb0e53500606d340d119f07846e4058afb8eb55c3eca07ffbcef
How does one manually update U-Boot?
-
If you repeat that command does it come back the same every time?
-
@stephenw10 Yes
-
Confirming this locally....
-
@stephenw10 Should I leave my unit untouched in case you need to refer to something or is it ok for me to proceed getting it working with UFS? I rely on this for VPN to work access and it needs to be up & ready by Thursday evening.
-
@kom I would just get it back online for your VPN. We're working on tracking down a unit that has this same UBoot internally.
-
Hi,
I have a recently purchased SG-1100 and requested the new firmware so that i could start working with a ZFS-based install. I'm getting the same error on my device:
U-Boot 2017.03-armada-17.10.2-g6a6581a-dirty (Nov 01 2018 - 16:04:57 -0300)
...
ERROR: cannot open /boot/lua/loader.lua: invalid argument.Should i just wait for a new recovery firmware to be released or what is the guidance?
I'm just starting out learning pfSense so it's not a big deal to wait a little while...Thanks,
Stevie. -
@stevie_0815 Install with UFS. When the fix comes out, you can backup your config, reinstall with ZFS, then restore your config. Boom, done.
-
@kom Thanks for the lightning fast response, will do as suggested.. Maybe a naive question but any idea about the fix ETA? Not (yet) familiar with how quickly this stuff gets turned around.
-
@stevie_0815 No.
-
@stevie_0815 We're looking into a fix.
-
A anthonys referenced this topic on
