Charon becoming unresponsive
-
It is there now. I checked a vm running
2.6.0.a.20210825.0500and it hasstrongswan-5.9.3 -
Great! Tnx a lot!
Gonna try tonight and stress it a bit more to see if it's reproducible or not anymore.
-
For some reason easy reproducible now, even with Strongswan 5.9.3 on latest snapshot.
Fresh reboot, login, Ipsec status, bring some tunnels up and it just stops. Have to say it crashes on bringing up the exact same connection as last time. Might be a coincidence, but seeing others sides logs might be interesting. Still no answer from there though.
Sometimes bringing up an down this particular connection is no problem at all.When it was this state I have run the advised commands:
sockstat | grep -i vici
root swanctl 28047 7 stream -> /var/run/charon.vici root swanctl 19770 7 stream -> /var/run/charon.vici root swanctl 19222 7 stream -> /var/run/charon.vici root php-fpm 22436 14 stream -> /var/run/charon.vici root charon 60508 22 stream /var/run/charon.vici root charon 60508 25 stream /var/run/charon.vici root charon 60508 26 stream /var/run/charon.vici root php-fpm 328 14 stream -> /var/run/charon.vici ? ? ? ? stream /var/run/charon.vici ? ? ? ? stream /var/run/charon.vici ? ? ? ? stream /var/run/charon.vicinetstat -LAn | grep vici
unix 3/0/3 /var/run/charon.viciCan provide complete IPSEC logs if needed, but it stalls at the same point in P2 initiate as last provided log snippet and then it all ends until rebooting.
Any other thing I could do to collect some more info? I just can’t believe to be the only one being able to reproduce this, on even multiple boxes. It all are KVM VPS boxes if that might matter at all.
Best regards,
Julian
-
I've got about 20 systems interconnected with IPsec tunnels that I setup when working on IPsec for 21.09/2.6.0 and thus far I haven't been able to reproduce it on any of them, no matter how much I click around on the status page. They are a mix of Plus and CE both on hardware and VMs (Proxmox/KVM and ESX)
Only thing I can think of is maybe something is in the middle of making a request when IPsec is reloaded at boot time, but even when I try to do that manually I can't get it to break here.
There must be some timing, environmental, or procedural component we haven't figured out yet that is contributing.
-
some more info:
ipsec status shows this:
con15_105{139}: ROUTED, TUNNEL, reqid 139
con15_105{139}: xxx.xxx.xxx.0/24|/0 === yyy.yyy.yyy.0/24|/0
con15_104{138}: ROUTED, TUNNEL, reqid 138
con15_104{138}: xxx.xxx.xxx.0/24|/0 === yyy.yyy.yyy.0/24|/0However, con15 show disconnected on the status screen. Do I misunderstand the info from ipsec status?
Trying to connect from status screen sometimes triggers the situation, especially shorly after boot.
-
On Strongswan github they suggest:
Configure logging, install debug symbols (or don't strip the binaries), and attach a debugger when it happens. Then provide stacktraces for all threads.
Then we can say something.I have to say that I haven’t done this before, let alone on freebsd. I think I need to run pkg install pfSense-kernel-debug for debug symbols but I’m unsure what to do next to get the stacktraces.
-
Debugging is probably a bit beyond what you'd be able to do since it would generate tons and tons of data and it would be nearly impossible to sift through it all to tell what the interesting bits are.
You could try
truss -fp xxxxxwherexxxxxis the PID of the charon process to see what happens at the time.Or
truss -f swanctl <blah>when attempting a manual connect/disconnect to see if it shows anything useful.I kind of doubt
swanctlwould be helpful in this case since it's probably just blocked waiting on a request to vici to do something and never getting a response so it piles up. -
Tnx again!
It looks like there are 2 charon processes running:
pgrep -f charon 58278 58059Wonder if that is correct. First PID gives output in truss, second seems empty.
Will write ouput to a file and see if it reveals anything usefull. -
That could definitely be a problem if there are two running. I'm not sure how that might happen, though.
Is it actually two and not just two threads or a worker of some kind?
This is normal:
root 35995 0.0 0.2 10752 1696 - Is 15:38 0:00.00 daemon: /usr/local/libexec/ipsec/charon[36322] (daemon) root 36322 0.0 2.0 51140 19356 - I 15:38 1:07.25 /usr/local/libexec/ipsec/charon --use-syslogBut if you see multiples of either of those then it could be the source of the problem.
There could be some kind of an odd timing issue where it's getting started twice, a race condition that depends on other environmental factors that may vary.
Might need to comb through the logs for both of those PIDs and then check other logs for entries around the time when the second PID started. See if there was anything logged in the system log, gateway log, etc.
-
I'm having the same issue! It took a lot of googling around to find this.
I'm running PFSense 22.01-RELEASE (arm) on a Netgate 3100. The IPSec tunnel is an AWS site-to-site VPN connection. I've only noticed this issue after upgrading the device after the recent CVE for authenticated RCE and CSRF.
IPsec logs will randomly stop, and the status page shows the tunnels as disconnected. Connecting them does nothing, restarting the service does nothing. When I SSH into it, The charon command is running but the second forked daemon isn't. I have no crash dumps, and the vici sockets are all used up. Running any commands against the socket fail as I get connections refused.
To recover from this state. I have to kill -9 the charon command, and restart the IPSec service and manually connect the tunnel connections.
I also can't find a pattern as to when this happens, but it does happen multiple times a week.
Let me know if there's any additional information I can collect for you guys about this issue, as it's quite annoying.
-
I am having same issue on pfsense + hosted on AWS after updating, from 2.2.4 to 22.01, every now and than app vpn tunnels stops working and ipsec service cannot be restarted, i have to reboot the firewall to fix the issue.
I have 50 VPN tunnels running with various sites.Any help would be appreciated.
-
Same thing here, we have about 70 tunnels and after upgrading to 2.6.0/22.01 everyday we have all ipsecs down.
We need to kill -9 charon (and edit some tunnel after that to apply settings and start tunnels) or reboot the AWS EC2 instance (pfsense 22.01).
We have other physical box (pfsense 2.6.0) with same problem:
Apr 11 11:41:18 pfsense-bloco14-ha01 kernel: sonewconn: pcb 0xfffff80181d0fa00: Listen queue overflow: 5 already in queue awaiting acceptance (4 occurrences)
Apr 11 11:43:44 pfsense-bloco14-ha01 kernel: sonewconn: pcb 0xfffff80181d0fa00: Listen queue overflow: 5 already in queue awaiting acceptance (22 occurrences)
Apr 11 12:14:01 pfsense-bloco14-ha01 kernel: sonewconn: pcb 0xfffff80181d33700: Listen queue overflow: 5 already in queue awaiting acceptance (2 occurrences)
Apr 11 12:15:01 pfsense-bloco14-ha01 kernel: sonewconn: pcb 0xfffff80181d33700: Listen queue overflow: 5 already in queue awaiting acceptance (11 occurrences)
Apr 11 12:16:06 pfsense-bloco14-ha01 kernel: sonewconn: pcb 0xfffff80181d33700: Listen queue overflow: 5 already in queue awaiting acceptance (12 occurrences)
Apr 11 12:17:09 pfsense-bloco14-ha01 kernel: sonewconn: pcb 0xfffff80181d33700: Listen queue overflow: 5 already in queue awaiting acceptance (11 occurrences)Any news so far?
-
Hi, another patient here.
17 P1s with a lot more Child SAs and in irregular intervals they all just stop working, even without any interaction at all with the WebGUI etc.
Is this something that was/will be addressed in 2.7.0? -
Yes, it's been fixed in current development snapshots of CE 2.7.0 already, and in the most recent release of pfSense Plus software.
