Ntopng dont start correctly

keyser

@stephenw10 said in Ntopng dont start correctly:

The FreeBSD pkg that gets installed for the pfSense ntop-ng package is version 5.0:
[22.01-RC][admin@6100-2.stevew.lan]/root: pkg search ntop
ntopng-5.0.d20210923,1         Network monitoring tool with command line and web interfaces
pfSense-pkg-ntopng-0.8.13_10   pfSense package ntopng
But it reports as ntop-ng 4.0 in the ntop webgui.

Steve

Huhh, seems a little strange that the webGUI in the ntopNG install is modified by the pfSense package manager to report v4.0.0 when it is a 5.0 daily build from september 2021.
But if you say so :-)

fireodo

@stephenw10 said in Ntopng dont start correctly:

But it reports as ntop-ng 4.0 in the ntop webgui.

[2.5.2-RELEASE][root@fireodo.lan]/root: pkg search ntop
ntopng-4.2.d20210309,1 Network monitoring tool with command line and web interfaces
pfSense-pkg-ntopng-0.8.13_10 pfSense package ntopng

Seems different?

stephenw10

Yes, in 2.5.2 (or 21.05).

In 22.01/2.6 the FreeBSD port used is v5.0.
The ntop-ng gui reports as ntopng Community v.4.0.0 (FreeBSD 12.3)

Steve

fireodo

@stephenw10 said in Ntopng dont start correctly:

Yes, in 2.5.2 (or 21.05).
In 22.01/2.6 the FreeBSD port used is v5.0.

AhA - thanks! :-)

A Former User

@stephenw10 said in Ntopng dont start correctly:

The FreeBSD pkg that gets installed for the pfSense ntop-ng package is version 5.0:

Excuse me for taking over your post, but I just installed it and it doesn't start.

stephenw10

Did you enable it and set an interface(s)?

A Former User

@stephenw10, now it works perfectly.

the same thing might happen to @keyser

keyser

@stephenw10 said in Ntopng dont start correctly:

Yes, in 2.5.2 (or 21.05).

In 22.01/2.6 the FreeBSD port used is v5.0.
The ntop-ng gui reports as ntopng Community v.4.0.0 (FreeBSD 12.3)

Steve

Hi Steve

Are you sure about that. If I run a check from the commandline it reports:

#: ntopng --version
Version: 4.0.0 [Community build]
GIT rev: :5.0.220113

That seems like a packaged version of NtopNG v4.0 from github where the package version is 5.0.xx - or am I misunderstanding something? Everything in GUI, HELP->About and shell says NtopNG v4.0.0

Since I'm new to ntopng, I dunno how to tell the versions apart.

stephenw10

Yeah, it's the port version which is, confusingly, at 5.
https://pkg00-atx.netgate.com/pfSense_v2_6_0_amd64-pfSense_v2_6_0/All/ntopng-5.0.d20210923%2C1.pkg

The package itself still reports 4.0.

Steve

keyser

@stephenw10 said in Ntopng dont start correctly:

Yeah, it's the port version which is, confusingly, at 5.
https://pkg00-atx.netgate.com/pfSense_v2_6_0_amd64-pfSense_v2_6_0/All/ntopng-5.0.d20210923%2C1.pkg

The package itself still reports 4.0.

Steve

So just to be clear - it really is NtopNG v4.0.0?
And the internal version number of the port package/work to get it running on freeBSD is 5.0.x?

Since it seems NtopNG 5.2 is available om freeBSD, is there any chance it could be packaged for pfSense any time soon?

stephenw10

Well that's what the gui shows. So... it could be gui version I guess. I won't pretend to be an expert on ntop-ng!

It sure looks like it's v5.0 in the port:
https://github.com/pfsense/FreeBSD-ports/commit/84c9db61e287493d33f24c5cb108908f56a801ca

That's in 2.6.