Captive portal block whatsup

[Gertjan]

@moelharrak said in Captive portal block whatsup:

The patch failed

That's it : 3 words, no details, nothing ??!?

Have you found : new System Patches v2.0 ?

So : install that official pfSense package "System Patches" first :

Open System => Patches and you'll see :

There will be a Blue Apply button.
Your mission : click it. Done.

Keep this pfSense package "System Patches" updated.

[moelharrak]

Hi,
I'm using pfsense 2.6.0, the latest version of "System Patches" is :

• I see no "Fix Captive Portal ..."
  
• I tried that manually to add the commit ID, but it says patch failed
  

[moelharrak]

Now The "System_Patches" version 2.0_4 is installed, the issue was in the "System Update" Previous stable version was selected.

• Patch installed and now UDP seems working with the captive portal.
  Need to do more tests.
  Thank you very much

[adminacp]

@gertjan Sorry for the late reply. Done doing the suggestion and now everything work. Thank you!

[rfmendes]

Boa Tarde.

Estava com problemas em chamadas do whatsapp, tanto vídeo quanto áudio atrás de um captive portal. Instalei o Pacote "System Patches" e apliquei o Patch do Captive Portal... conforme orientado. Reiniciei o servidor e tudo voltou a funcionar 100%. Estarei realizando mais testes, mas de momento esta resolvido.

Obrigado pela ajuda!

Rafael Mendes

[marcelo.castro2018]

Perfect, this work fine for me!

[Bilgram]

@gertjan
Hi... I am new to this forum and have a similar problem with my pfsense+ Version 22.01 (don't know if this is the same as 2.6).

With the previous Version WLAN Call for our mobile phones worked without problems....since the update no more....when I disable the captive portal then WLAN Call works.
I have also in the meantime installed the System Package 2.0_4

Unfortunately WLAN Call still doesn't work.
Do you have an idea how to solve this?

[Gertjan]

@bilgram said in Captive portal block whatsup:

System System Package 2.0_4

Installing System Package 2.0_4 isn't enough.
One more click is needed :

Click Apply.

edit : strange. I"ve said the same thing already in this thread.
Your issue is different ? And if so, more details please.
What is "WLAN Call" ? A call using some VOIP protocol on a device that is connected to a Wifi network, that is also your captive portal ? (guess so).

[Bilgram]

@gertjan
Wow....thanks for the speedy reply..:-))
I read the thread but didn't understand it...or should I say I can't see where I can find the "Apply" Button....
I installed the Patch 2.0_4 over the Package Manager and as you can see the Patch is fully installed....according to the Package Manager...
Otherwise it would be in red...

Where do I find this "one more click"??
FYI:
WLAN Call allows mobile devices to telephone over wireless LAN Network (DSL) WITHOUT using a mobile provider e.g. O2 or Vodafone. The provider however has to allow this or rather hass to make this service available...
Our mobile devices are in our so called "neutral" zone which is actually our external Network and every device in this Network goes over the captive portal.

[Gertjan]

@bilgram said in Captive portal block whatsup:

I installed the Patch 2.0_4

So you have a new menu item here :

Click on Patches.

And then to the click on patch "(Redmine #12834)" as mentioned above.

[Bilgram]

@gertjan
aha....that's where it is!!:-))
Thanks for your help.....now I have to test it.....
As you may have gathered I am not an expert in this patch blah blah....
I'm old school....user to have a SUSE Linux Firewall...with CLI and all that..

Anyway one last question.....would you advise me that I "apply" the remaining patches or should I only explicitly choose those when a problem occurs??

[Bilgram]

@gertjan
oh dear....I assume I have to do a REBOOT in order for the patch to take effect?!?

[Gertjan]

@bilgram said in Captive portal block whatsup:

would you advise me that I "apply" the remaining patches

These patches will present in a future pfSense.
You can apply them all.

[Bilgram]

@gertjan
OK....will do....thanks.

[Gertjan]

@bilgram said in Captive portal block whatsup:

I have to do a REBOOT in order for the patch to take effect?!?

The ones I know of, no.

This one :

I don't know, I'm using teh CE version.

[rfmendes]

@gertjan Yes

[Bilgram]

@gertjan
Hey man....thanks alot....after applying all patches and rebooting the appliance everything is now hunky dory....thanks for your help and patience!!! :-)

[ertegun]

i did it only. And worked great.

[Gertjan]

@ertegun

You just allowed (white listed) all the IP addresses, starting from 192.168.60.1 to 192168.60.254, or, the entire /24 network. Your entire captive portal network ?

All these devices that get an IP in that network assigned, will pass through the portal without seeing any login page or what so ever.

You might as well shut down the captive portal completely : that works also great.

The issue (if I recall well - 2.6.0 is a long time in the past for me) was : pfSense 2.6.0 only passes TCP traffic, not ICMP, neither UDP. That was a big bug, and breaked a lot.

As said on the first line, above :

@moelharrak said in Captive portal block whatsup:

After upgrade to 2.6 captive portal is blocking whatsup (audio and video, chat works fine), I did test other app like instagram and it's works fine.
when I disable the captive portal, whatsup goes back to work normal.

See also : UDP/ICMP is not working after upgrade to 2.6.0

I guess it's still a question of : install the System patches package, then apply all the patches listed in this package.
Done.