pfSense on Watchguard M370
-
@hangmansnoose001380
Can you tell me how to change the password in BIOS? I have an m470, which may be different from the m370 motherboard. I want to modify the BIOS myself. Is there a tutorial? -
@qinghua907 As stated above I don't have a method for removing the password as the Aptio V bios will regen it even if it is removed. The only way I have found to have an unlocked bios is to reflash a bios that doesn't have the password enabled (Lanner original/modified bios). I can't confirm this as I don't have a M470 but I believe the bios I used on the M370 is the same for the M470. I make no promises on this as it has not been tested. If you would like to test and validate if the same bios works or not pm me and I can send you a link to the bios I used. The instructions above should be the same but I take no responsibility for a bricked device. I would highly recommend following the section above to make a backup of the current bios and verifying it's valid before flashing the new bios. If you have a successful back you should always be able to revert to the default bios using the same methods.
-
@hangmansnoose001380 OK, please send me your BIOS download link, thank you
-
Just got a M470. I'm going to start testing to see if the same bios & process works for the M470.
-
Current testing:
Mod bios does indeed work for the M470. I assume this means it will also work with the 5 & 670. Xeon does work on the M470, currently running a Xeon E3-1260L v5. PCI-e works in the M470, won't run on the 370 as it requires the C236 chipset that is only in the M470+ models. Currently testing to make sure that all ports are working including the add-in card. Getting an E3-1240 v6 Xeon to test with as well as the microcode should allow any Skylake/Kabylake (5th/6th gen) processor. -
@hangmansnoose001380
Great. Xeon (R) CPU e3-1260l V5 is used on my m470. Can this CPU work in turbo boost mode on your m470? Look forward to your good news -
@qinghua907 I currently have turbo & speedstep enabled and it's booting fine. Haven't checked yet if turbo is functioning correctly as I've been dealing with an issue of pfsense loading the i350 addin module ports first (ports 0-7) and the onboard second (ports 8-15) and the ports on the module don't seem to be working correctly.
login-to-view -
I'd say it's not completely running right:
login-to-view -
@hangmansnoose001380
I suggest you modify it on the original BIOS of m470. Maybe it's better -
That looks correct. 2901MHz indicates turbo is active. It will never actually show the turbo speed since it's dynamic per core and dependent on thermal performance.
Steve
-
So the M470 is now up with an E3-1245 v6 processor with turbo on with no issues with the CPU, still looking into the module ports not communicating:
login-to-view -
Thanks @stephenw10 for the info on the ports. For anyone else with an 8 port add on module the ports are not in the order they are labeled on the physical device. Add on module ports are as follows:
Top row: 4 5 6 7
Bottom row: 0 1 2 3 -
@hangmansnoose001380 Is the test finished?
-
@qinghua907 I've tested and it seems to work fine.
-
@hangmansnoose001380 good news
-
@hangmansnoose001380
Last weekend, I flash the BIOS of m470. Now I can enter the BIOS, set Rui frequency and set USB startup. It's very good. Thank you！
login-to-view
login-to-view -
@hangmansnoose001380 Can you DM me the BIOS-File too? I have been looking for the original bios for a long time, but have not found anything on the internet.
Thx
-
@johann31 Flashed the new firmware yesterday, BIOS can now be entered without the password, thank you!
-
You used an external programmer?
-
Yes, the CH341A.