Connectity lost afer a while

Gertjan

@smalldragoon said in Connectity lost afer a while:

perform automatically the break and re make the connection when it is a long time it is down ... I mean outside dpinger

Can you 'login' into the ORANGE3GWFI_DHCP device and see what the status of the link is ?

smalldragoon

4G is always up / connected ...
and in the DHCP options, no so much ..

Gertjan

@smalldragoon said in Connectity lost afer a while:

4G is always up / connected ..

And you believe that ??

Then why are there massive ping (and other packet) loses from time to time ?
Because the cable between pfSense and the 4G modem is bad ? ;) => Change the cable then !

As said earlier :

@gertjan said in Connectity lost afer a while:

Also : Orange 3G/4G modems .... I know them, as I'm also using a 4G Orange (I'm situated in Franc) device as a backup connection.
I'll describe this connection : its sucks.

Right now, I have 31+ Mbits on my 4G iPhone 4G.
In the evening, around 19h30, this will drop to a small 5 ? Mbits and often even less.
You know why.

edit :

As pfSense uses 192.168.1.1 on its LAN, you schould change this :

to, for example, 192.168.2.1

smalldragoon

@gertjan
ok Fair Enough, I will make regular check on the connectivity ;-)

regarding the LAN address Schema, no worries, I changed already to something else.. Thanks for the heads up !

thanks for all your answers and help !

stephenw10

Which part of this is WIFI? Are you actually using a WIFI NIC in pfSense to connect to the 4G router? If that loses link there should be wireless logs.

Steve

smalldragoon

@stephenw10 Hi !
so :

yes I have a wifi Card in my pfSense Host
but nope, I did not get some :

I debugged with some info I got in the general one

stephenw10

So you have the WIFI NIC assigned as the 'Orange3GWIFI' interface?

You should see some wifi logs if so. Is it even connected?

Steve

Gertjan

@smalldragoon said in Connectity lost afer a while:

yes I have a wifi Card in my pfSense Host

So you have a 'device', the 3G/4G modem router, connected on both sides with a radio ....
That's a very though one to debug.

stephenw10

That can work, I've seen people use it before and it gets around some of the issues with 4G connections.
But it's unclear what's happening here since it looks like the connection is up but...there are no wifi logs...

smalldragoon

@stephenw10 yes,

and

And connection is working

Gertjan

@smalldragoon said in Connectity lost afer a while:

After a while, the Wifi connection drops

and

so 'dpinger' is pining 192.168.1.1, the 4G/Wifi router, and this one is loosing the connection ?
Instead of using 8.8.8.4.4, can you ping the IP of the router / modems LAN interface 192.168.1.1 ?
This will show you if the Wifi goes bad ....
If the connection doesn't work, but it still shows a solid green "online" without moss, you'll know that the Wifi parts is good (the connection between pfSense over Wifi to the 4G/Wifi router). Then it must be the other side, the 4G.

stephenw10

Ok if you're seeing 'no carrier' in ifconfig for the wifi interface then it's the wifi that is dropping. Unless the 4G router is crashing entirely.

What does the system log show when it fails?

How do you recover from this? Resave the Orange interface? Reboot the 4G router?

Steve

smalldragoon

@stephenw10 hence my post trying to understand what was happening
I was assuming that the wifi logs are ONLY when we setup pfsense as acces point, not as a wifi client

I was pinging 8.8.4.4 and then , based on the first answers, I indeed changed to ping 192.168.1.1
so I'm now monitoring "just" the wifi connection with dpinger.

stephenw10

Mmm, I would have expected something in the wifi logs but almost no-one uses station mode like that. What do the system logs show though?

And what do you do or have you tried to recover when it does happen?

Steve

smalldragoon

@stephenw10
yes for your first statement, as I was able to connect, with a windows 10 machine to the 4G modem at the same time .
I have not so much in my logs, I was expecting something in the wireless logs.
To recover, I tried to reconnect, no result, tried to disable and re-enable interface, nothing.
if I reboot the pfsense, everything reconnects like a charm

stephenw10

Hmm, there must be something in the system logs at that point if the interface loses link. Anything there could be a clue.

USB wifi devices are not well thought of though. This could be a driver or even a hardware bug that we can't do anything about.

Steve

smalldragoon

@stephenw10
For ref , these are the dmesg entries for the card :

urtw0: rtl8187b rf rtl8225z2 hwrev e
urtw0: <RTL8187BWLANAdapter> on usbus0
urtw0 on uhub0
ugen0.3: <ManufacturerRealtek RTL8187BWLANAdapter> at usbus0
Root mount waiting for: usbus0 CAM
kbd2 at ukbd0

For system logs, I only get some info like

system.log:Jun 29 18:44:27 Bastion check_reload_status[377]: rc.newwanip starting urtw0_wlan0
system.log:Jun 29 18:44:28 Bastion php-fpm[121]: /rc.newwanip: rc.newwanip: Info: starting on urtw0_wlan0.
system.log:Jun 29 18:44:28 Bastion php-fpm[121]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.1.21) (interface: ORANGE3GWIFI[opt3]) (real interface: urtw0_wlan0).
system.log:Jun 29 18:49:59 Bastion kernel: urtw0_wlan0: link state changed to DOWN
system.log:Jun 29 18:49:59 Bastion check_reload_status[377]: Linkup starting urtw0_wlan0
system.log:Jun 29 18:49:59 Bastion kernel: urtw0_wlan0: link state changed to UP
system.log:Jun 29 18:49:59 Bastion kernel: arpresolve: can't allocate llinfo for 192.168.1.1 on urtw0_wlan0
system.log:Jun 29 18:50:00 Bastion kernel: arpresolve: can't allocate llinfo for 192.168.1.1 on urtw0_wlan0
system.log:Jun 29 18:50:01 Bastion kernel: arpresolve: can't allocate llinfo for 192.168.1.1 on urtw0_wlan0
system.log:Jun 29 18:50:02 Bastion check_reload_status[377]: rc.newwanip starting urtw0_wlan0
system.log:Jun 29 18:50:03 Bastion php-fpm[11380]: /rc.newwanip: rc.newwanip: Info: starting on urtw0_wlan0.
system.log:Jun 29 18:50:03 Bastion php-fpm[11380]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.1.21) (interface: ORANGE3GWIFI[opt3]) (real interface: urtw0_wlan0).
system.log:Jun 29 18:59:18 Bastion kernel: urtw0_wlan0: link state changed to DOWN
system.log:Jun 29 18:59:21 Bastion check_reload_status[377]: Linkup starting urtw0_wlan0
system.log:Jun 29 18:59:21 Bastion kernel: urtw0_wlan0: link state changed to UP
system.log:Jun 29 18:59:22 Bastion kernel: arpresolve: can't allocate llinfo for 192.168.1.1 on urtw0_wlan0
system.log:Jun 29 18:59:23 Bastion kernel: arpresolve: can't allocate llinfo for 192.168.1.1 on urtw0_wlan0
system.log:Jun 29 18:59:23 Bastion check_reload_status[377]: rc.newwanip starting urtw0_wlan0
system.log:Jun 29 18:59:24 Bastion php-fpm[49099]: /rc.newwanip: rc.newwanip: Info: starting on urtw0_wlan0.
system.log:Jun 29 18:59:24 Bastion php-fpm[49099]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.1.21) (interface: ORANGE3GWIFI[opt3]) (real interface: urtw0_wlan0).

which doesn't really help as I know I lost the link.
Having that said, dpinger being set to 192.168.1.1, no more issues
Would be great anyway for pfsense to have some logs in wireless.log as client , don't know how to create a request for it. I can do some tests to help

smalldragoon

@stephenw10 hence my post trying to understand what was happening
I was assuming that the wifi logs are ONLY when we setup pfsense as access point, not as a wifi client

Gertjan

@smalldragoon

You saw :

....
system.log:Jun 29 18:49:59 Bastion kernel: urtw0_wlan0: link state changed to DOWN
system.log:Jun 29 18:49:59 Bastion kernel: urtw0_wlan0: link state changed to UP
....
system.log:Jun 29 18:59:18 Bastion kernel: urtw0_wlan0: link state changed to DOW
system.log:Jun 29 18:59:21 Bastion kernel: urtw0_wlan0: link state changed to UP
....

This is what you should call a non reliable connection.
You had the (start of the) answers all the time right in front of you ! The logs always tell you what's happening.

I know, we all love Wifi as it it so easy .... Just remind yourself that a 'cable' is a "set it and forget it solution" (for live). And won't break your connection every 10 minutes or so.

And keep in mind : it's not only the connection that is rebuild, but also a lot more : because it is a WAN type interface, a lot of code is triggered to reset and set a gateway, unbound (DNS) is probably restarted etc etc.

And Google this : "10 good reasons why not to use Realtek devices".
Or ask the FreeBSD community.

stephenw10

Mmm, wifi losing link could be a number of causes.

Those logs were generated without you doing anything manually? It looks like it reconnects there but you say you have to reboot to actually use the connection?

If you have another device connected to the 4G router at the same time does that also lose link?

Steve