ZFS on QOTOM type Boxes

JKnott

I use ZFS on mine.

hypnosis4u2nv

chudak

No problems on:

Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz
4 CPUs: 1 package(s) x 2 core(s) x 2 hardware threads
AES-NI CPU Crypto: Yes (active)
QAT Crypto: No

bingo600

@hypnosis4u2nv
No problems here too.

Been running ZFS since 2.4.5 , on a SSD

hypnosis4u2nv

Curious, are any of you running it as a single disk also?

I've tried several installs and it just feels sluggish on ZFS and unusable once it's configured with packages. I've noticed the HD light steady when it would be in this state. Pain to even access logs to see what's going on.

bPsdTZpW

@hypnosis4u2nv I am using a single-SSD ZFS installation of 2.6.0 on a Qotom box with no problems. You could try checking your disk(s) for errors, and running a memory/CPU test.

JKnott

@hypnosis4u2nv said in ZFS on QOTOM type Boxes:

Curious, are any of you running it as a single disk also?

I run pfSense on the single SSD in my Qotom computer.

fireodo

@hypnosis4u2nv said in ZFS on QOTOM type Boxes:

Curious, are any of you running it as a single disk also?

As you can see in my signature - running on a single SSD Disk with ZFS.

Regards,
fireodo

stephenw10

@hypnosis4u2nv said in ZFS on QOTOM type Boxes:

it just feels sluggish on ZFS and unusable once it's configured with packages.

A box with those specs should have no problems. Something else is affecting it. Check the logs. Check the system activity (top output).

Steve

hypnosis4u2nv

@bpsdtzpw Ran the tests and everything passed. I even tried UEFI and BIOS ZFS methods and still did the same thing.

hypnosis4u2nv

@stephenw10 The problem with looking at the activity is that the system hangs and I can't see anything. I may be able to try and get the logs and post them here to see what may be causing it. Problem is I need to find my Edgerouter and use that while I play with pfSense.

mvikman

I have a Qotom Q330G4 with

Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz
4 CPUs: 1 package(s) x 2 core(s) x 2 hardware threads
AES-NI CPU Crypto: Yes (active)
QAT Crypto: No
8GB RAM
Single 30GB Intel Series 525 SSD (mSATA)

Been using ZFS, when it came available in pfSense 2.4.x(?) and upgrades up to 2.5.2
Fresh install of 2.6.0 using ZFS and upgraded that to pfSense Plus 22.01 and now running 22.05.

No problems with my setup.

hypnosis4u2nv

If I give this a go again, what logs should I try to get for review?

stephenw10

Mostly the main system log. If it's some sort of drive issue where it's unable to write out the logs when it fails that will only be shown on the console.
The monitoring graphs may show something leading up to it if it's some resource exhaustion.

Steve

hypnosis4u2nv

@stephenw10 Thanks, Ill give this another go and post the logs.