Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Suspicious Traffic?

    Scheduled Pinned Locked Moved General pfSense Questions
    54 Posts 4 Posters 18.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      deanfourie @johnpoz
      last edited by deanfourie

      @johnpoz

      Ok, let me map it out for you too. Also, this public IP is NOT my public IP.

      ISP >>>> 4G Wireless (through the air) >>>>>> 4G Router (Huawei 192.168.8.1 incoming internet) >>>>> pfSense WAN Interface (192.168.8.2) >>>>>>>> pfSense LAN (172.16.101.0/27) >>>>>>> LAN

      Upon a scan on the WAN interafce I would expect to see 2 hosts, 192.168.8.1 and 192.168.8.2.

      Instead of seeing a private IP on my upstream gateway, I am seeing a public IP that shows as being a datacenter in California somehwere.

      Cheers

      Capture14.PNG

      johnpozJ 1 Reply Last reply Reply Quote 0
      • D
        deanfourie
        last edited by

        The router is not in bridge mode, so I would not expect to be seeing a public IP, and if I were, I would expect to be seeing my own public IP

        1 Reply Last reply Reply Quote 0
        • D
          deanfourie
          last edited by

          Its just gone ahead and changed again.

          Capture15.PNG

          johnpozJ 1 Reply Last reply Reply Quote 0
          • johnpozJ
            johnpoz LAYER 8 Global Moderator @deanfourie
            last edited by

            @deanfourie I wouldn't trust locations of IPs like that.

            Many IP can be just registered to the owning company HQ, etc.

            Its quite possible for you to learn the mac address of not connected device when using stuff like 4G or cable modems, etc..

            mac.jpg

            There could be lots of ways on how that mac was learned.. I see arps from all over my ISP network on my wan.. With even different L3 address space, etc.

            Maybe your device switches mode from nating to bridge when it looses a connection or when it boots up, etc. If it was actually isolated L2, then no you should see the mac for an address outside that L2.. But with such devices do you really know what its doing and how its doing it?

            My cable modem bridges - but I still can access it via 192.168.100.1 address, etc.

            If that is IP of your gateway on the wan side of your own device, still not understanding your concern?

            An intelligent man is sometimes forced to be drunk to spend time with his fools
            If you get confused: Listen to the Music Play
            Please don't Chat/PM me for help, unless mod related
            SG-4860 24.11 | Lab VMs 2.8, 24.11

            1 Reply Last reply Reply Quote 0
            • johnpozJ
              johnpoz LAYER 8 Global Moderator @deanfourie
              last edited by johnpoz

              @deanfourie said in Suspicious Traffic?:

              Its just gone ahead and changed again.

              Yeah 4G stuff prob going to change all the time... Connection moved to a new tower, different actual connection, etc. etc..

              An intelligent man is sometimes forced to be drunk to spend time with his fools
              If you get confused: Listen to the Music Play
              Please don't Chat/PM me for help, unless mod related
              SG-4860 24.11 | Lab VMs 2.8, 24.11

              D 1 Reply Last reply Reply Quote 0
              • D
                deanfourie @johnpoz
                last edited by

                @johnpoz nah im really not comfortable with this.

                When its at 192.168.8.1, I still have internet. I never see a public IP on its as its double NATting.
                Im Natting at pfsense then again at the upstream gateway.

                What bout these shinnanigans? Some strange SSH and HTTP traffic to a very strange and foreign country?

                1658831663593-capture4.png

                johnpozJ 1 Reply Last reply Reply Quote 0
                • johnpozJ
                  johnpoz LAYER 8 Global Moderator @deanfourie
                  last edited by

                  @deanfourie pfsense itself should not be sshing to random IPs.. Or even 80..

                  What does pfsense show for its state table for those IPs.. If pfsense or a client generated traffic then it would be in the state table.

                  You sure that is just not traffic inbound from that source port as a SA? That is method of scanning..

                  Sniff on your wan for those IPs - lets see the pcap file.

                  An intelligent man is sometimes forced to be drunk to spend time with his fools
                  If you get confused: Listen to the Music Play
                  Please don't Chat/PM me for help, unless mod related
                  SG-4860 24.11 | Lab VMs 2.8, 24.11

                  D 1 Reply Last reply Reply Quote 0
                  • D
                    deanfourie @johnpoz
                    last edited by deanfourie

                    @johnpoz Can I attach PCAP?

                    ssh.cap

                    johnpozJ 1 Reply Last reply Reply Quote 0
                    • johnpozJ
                      johnpoz LAYER 8 Global Moderator @deanfourie
                      last edited by

                      @deanfourie sure you can..

                      BTW those IPs are owned by Alibaba.com - well known website..

                      Again did you look in your state table?

                      An intelligent man is sometimes forced to be drunk to spend time with his fools
                      If you get confused: Listen to the Music Play
                      Please don't Chat/PM me for help, unless mod related
                      SG-4860 24.11 | Lab VMs 2.8, 24.11

                      D 1 Reply Last reply Reply Quote 0
                      • D
                        deanfourie @johnpoz
                        last edited by

                        @johnpoz could it be getting the port mappings all messed up because im double natting?

                        will check state table now.

                        1 Reply Last reply Reply Quote 0
                        • D
                          deanfourie
                          last edited by stephenw10

                          WAN	tcp	192.168.8.2:12812 (172.16.101.17:50569) -> 20.198.119.84:443	ESTABLISHED:ESTABLISHED	270 / 150	25 KiB / 34 KiB	
                          WAN	tcp	192.168.8.2:18400 (172.16.101.17:50585) -> 74.125.68.188:5228	ESTABLISHED:ESTABLISHED	163 / 166	7 KiB / 18 KiB	
                          WAN	tcp	192.168.8.2:46821 (172.16.101.7:40860) -> 34.120.177.193:443	ESTABLISHED:ESTABLISHED	19 / 18	2 KiB / 5 KiB	
                          WAN	tcp	192.168.8.2:2211 (172.16.101.7:52014) -> 185.199.108.133:443	ESTABLISHED:ESTABLISHED	11 / 11	1 KiB / 5 KiB	
                          WAN	tcp	192.168.8.2:47425 (172.16.101.15:49690) -> 76.223.31.44:443	ESTABLISHED:ESTABLISHED	40 / 42	2 KiB / 17 KiB	
                          WAN	tcp	192.168.8.2:20743 (172.16.101.15:49408) -> 20.198.119.143:443	ESTABLISHED:ESTABLISHED	49 / 33	6 KiB / 9 KiB	
                          WAN	tcp	192.168.8.2:7210 (172.16.101.15:49738) -> 185.159.80.151:8886	ESTABLISHED:ESTABLISHED	317 / 449	13 KiB / 18 KiB	
                          WAN	tcp	192.168.8.2:11825 (172.16.101.15:49775) -> 74.125.200.188:5228	ESTABLISHED:ESTABLISHED	102 / 102	5 KiB / 12 KiB	
                          WAN	tcp	192.168.8.2:50350 (172.16.101.15:1025) -> 162.159.130.234:443	ESTABLISHED:ESTABLISHED	2.854 K / 3.08 K	128 KiB / 685 KiB	
                          WAN	udp	192.168.8.2:5477 -> 173.234.106.107:1194	MULTIPLE:MULTIPLE	4.046 K / 4.045 K	333 KiB / 327 KiB	
                          WAN	icmp	192.168.8.2:53676 -> 1.1.1.1:53676	0:0	4.023 K / 4.022 K	114 KiB / 114 KiB	
                          WAN	tcp	192.168.8.2:39097 (172.16.101.15:1503) -> 208.123.73.199:443	ESTABLISHED:ESTABLISHED	1.788 K / 1.927 K	479 KiB / 429 KiB	
                          WAN	tcp	192.168.8.2:57584 (172.16.101.15:12915) -> 151.101.165.2:443	ESTABLISHED:ESTABLISHED	1.074 K / 1.735 K	168 KiB / 1.86 MiB	
                          WAN	tcp	192.168.8.2:29269 (172.16.101.15:12923) -> 54.235.148.246:443	ESTABLISHED:ESTABLISHED	59 / 58	4 KiB / 14 KiB	
                          WAN	tcp	192.168.8.2:43248 (172.16.101.7:52032) -> 185.199.108.133:443	ESTABLISHED:ESTABLISHED	14 / 13	1 KiB / 5 KiB	
                          WAN	tcp	192.168.8.2:29264 (172.16.101.7:40878) -> 34.120.177.193:443	ESTABLISHED:ESTABLISHED	20 / 18	2 KiB / 5 KiB	
                          WAN	tcp	192.168.8.2:63243 (172.16.101.17:50822) -> 35.82.210.186:443	ESTABLISHED:FIN_WAIT_2	11 / 14	1 KiB / 8 KiB	
                          WAN	tcp	192.168.8.2:42063 (172.16.101.15:1083) -> 151.101.194.137:443	FIN_WAIT_2:FIN_WAIT_2	257 / 449	41 KiB / 533 KiB	
                          WAN	tcp	192.168.8.2:21220 (172.16.101.15:1087) -> 199.232.214.133:443	FIN_WAIT_2:FIN_WAIT_2	2.131 K / 3.173 K	146 KiB / 3.03 MiB	
                          WAN	tcp	192.168.8.2:25604 (172.16.101.15:1091) -> 151.101.130.137:443	FIN_WAIT_2:FIN_WAIT_2	309 / 499	31 KiB / 418 KiB	
                          WAN	tcp	192.168.8.2:7591 (172.16.101.7:40880) -> 34.120.177.193:443	ESTABLISHED:CLOSING	19 / 29	2 KiB / 7 KiB	
                          WAN	tcp	192.168.8.2:24193 (172.16.101.7:38508) -> 185.199.110.133:443	ESTABLISHED:ESTABLISHED	12 / 12	1 KiB / 5 KiB	
                          WAN	tcp	192.168.8.2:41881 (172.16.101.15:1318) -> 142.250.71.78:443	ESTABLISHED:ESTABLISHED	33 / 40	10 KiB / 10 KiB	
                          WAN	tcp	192.168.8.2:55573 (172.16.101.15:1352) -> 3.24.51.182:21	ESTABLISHED:ESTABLISHED	50 / 51	4 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:25728 (172.16.101.15:1378) -> 162.159.135.232:443	FIN_WAIT_2:FIN_WAIT_2	14 / 13	1 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:8063 (172.16.101.15:1410) -> 44.226.92.23:443	TIME_WAIT:TIME_WAIT	12 / 12	2 KiB / 8 KiB	
                          WAN	udp	192.168.8.2:9834 (172.16.101.15:65210) -> 142.250.67.10:443	MULTIPLE:MULTIPLE	21 / 24	5 KiB / 7 KiB	
                          WAN	tcp	192.168.8.2:55434 (172.16.101.17:50851) -> 52.41.50.6:443	FIN_WAIT_2:FIN_WAIT_2	11 / 12	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:57382 (172.16.101.15:1418) -> 35.82.210.186:443	TIME_WAIT:TIME_WAIT	12 / 11	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:54394 (172.16.101.15:1419) -> 202.124.124.90:80	FIN_WAIT_2:FIN_WAIT_2	6 / 5	346 B / 391 B	
                          WAN	tcp	192.168.8.2:22280 (172.16.101.15:1420) -> 44.226.92.23:443	FIN_WAIT_2:FIN_WAIT_2	14 / 11	3 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:44695 (172.16.101.15:1421) -> 35.82.210.186:443	TIME_WAIT:TIME_WAIT	12 / 12	2 KiB / 8 KiB	
                          WAN	tcp	192.168.8.2:1247 (172.16.101.15:1422) -> 35.82.210.186:443	FIN_WAIT_2:FIN_WAIT_2	12 / 12	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:17221 (172.16.101.15:1423) -> 202.124.124.91:80	FIN_WAIT_2:FIN_WAIT_2	6 / 5	346 B / 391 B	
                          WAN	udp	192.168.8.2:19584 (172.16.101.15:53957) -> 142.250.204.4:443	MULTIPLE:MULTIPLE	175 / 396	26 KiB / 376 KiB	
                          WAN	tcp	192.168.8.2:47504 (172.16.101.17:50852) -> 44.226.92.23:443	FIN_WAIT_2:FIN_WAIT_2	11 / 12	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:48004 (172.16.101.15:1426) -> 202.124.124.91:80	FIN_WAIT_2:FIN_WAIT_2	4 / 5	266 B / 391 B	
                          WAN	udp	192.168.8.2:23977 (172.16.101.15:62766) -> 142.250.67.14:443	MULTIPLE:MULTIPLE	40 / 55	6 KiB / 44 KiB	
                          WAN	udp	192.168.8.2:29747 (172.16.101.15:52600) -> 172.217.24.42:443	MULTIPLE:MULTIPLE	12 / 11	4 KiB / 7 KiB	
                          WAN	tcp	192.168.8.2:12425 (172.16.101.15:1427) -> 172.217.24.42:443	FIN_WAIT_2:FIN_WAIT_2	10 / 10	1 KiB / 6 KiB	
                          WAN	udp	192.168.8.2:35646 (172.16.101.15:64854) -> 172.217.167.110:443	MULTIPLE:MULTIPLE	18 / 21	6 KiB / 6 KiB	
                          WAN	udp	192.168.8.2:17732 (172.16.101.15:52777) -> 142.251.12.100:443	MULTIPLE:MULTIPLE	8 / 7	2 KiB / 3 KiB	
                          WAN	udp	192.168.8.2:25021 (172.16.101.17:61533) -> 172.217.167.110:443	MULTIPLE:MULTIPLE	10 / 11	3 KiB / 5 KiB	
                          WAN	udp	192.168.8.2:42623 (172.16.101.15:64825) -> 142.250.71.74:443	MULTIPLE:MULTIPLE	9 / 9	3 KiB / 4 KiB	
                          WAN	udp	192.168.8.2:14418 (172.16.101.15:58123) -> 142.250.66.238:443	MULTIPLE:MULTIPLE	9 / 10	4 KiB / 5 KiB	
                          WAN	udp	192.168.8.2:45098 (172.16.101.15:62002) -> 151.101.165.229:443	MULTIPLE:MULTIPLE	7 / 5	2 KiB / 4 KiB	
                          WAN	tcp	192.168.8.2:18827 (172.16.101.15:1430) -> 68.67.73.20:443	TIME_WAIT:TIME_WAIT	9 / 10	1015 B / 6 KiB	
                          WAN	tcp	192.168.8.2:11080 (172.16.101.15:1431) -> 68.67.73.20:443	TIME_WAIT:TIME_WAIT	23 / 27	6 KiB / 27 KiB	
                          WAN	tcp	192.168.8.2:5459 (172.16.101.15:1432) -> 68.67.73.20:443	TIME_WAIT:TIME_WAIT	10 / 10	1 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:2903 -> 204.61.216.50:53	FIN_WAIT_2:FIN_WAIT_2	6 / 5	366 B / 2 KiB	
                          WAN	tcp	192.168.8.2:28352 (172.16.101.15:1437) -> 44.226.92.23:443	TIME_WAIT:TIME_WAIT	11 / 11	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:4299 (172.16.101.15:1438) -> 202.124.124.90:80	FIN_WAIT_2:FIN_WAIT_2	5 / 5	306 B / 391 B	
                          WAN	tcp	192.168.8.2:43484 (172.16.101.15:1439) -> 208.123.73.73:443	TIME_WAIT:TIME_WAIT	21 / 35	5 KiB / 40 KiB	
                          WAN	tcp	192.168.8.2:51773 (172.16.101.15:1440) -> 208.123.73.73:443	TIME_WAIT:TIME_WAIT	14 / 15	4 KiB / 12 KiB	
                          WAN	tcp	192.168.8.2:1628 (172.16.101.15:1441) -> 208.123.73.73:443	ESTABLISHED:ESTABLISHED	5 / 4	809 B / 511 B	
                          WAN	tcp	192.168.8.2:38092 (172.16.101.15:1442) -> 208.123.73.73:443	ESTABLISHED:ESTABLISHED	9 / 9	993 B / 7 KiB	
                          WAN	tcp	192.168.8.2:24666 (172.16.101.15:1443) -> 208.123.73.73:443	ESTABLISHED:ESTABLISHED	5 / 4	809 B / 511 B	
                          WAN	tcp	192.168.8.2:8877 (172.16.101.15:1444) -> 208.123.73.73:443	ESTABLISHED:ESTABLISHED	9 / 9	993 B / 7 KiB	
                          WAN	tcp	192.168.8.2:49217 (172.16.101.15:1445) -> 208.123.73.73:443	ESTABLISHED:ESTABLISHED	8 / 9	941 B / 7 KiB	
                          WAN	tcp	192.168.8.2:20808 (172.16.101.15:1446) -> 35.82.210.186:443	FIN_WAIT_2:FIN_WAIT_2	12 / 11	3 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:10716 -> 199.180.180.63:53	TIME_WAIT:TIME_WAIT	5 / 5	327 B / 2 KiB	
                          WAN	tcp	192.168.8.2:27420 (172.16.101.15:1447) -> 44.226.92.23:443	ESTABLISHED:ESTABLISHED	12 / 12	2 KiB / 8 KiB	
                          WAN	tcp	192.168.8.2:31279 (172.16.101.15:1448) -> 44.226.92.23:443	FIN_WAIT_2:FIN_WAIT_2	12 / 12	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:65211 (172.16.101.17:50853) -> 35.82.210.186:443	FIN_WAIT_2:FIN_WAIT_2	11 / 12	2 KiB / 6 KiB	
                          WAN	udp	192.168.8.2:60136 -> 150.171.16.34:53	MULTIPLE:SINGLE	1 / 1	73 B / 89 B	
                          WAN	udp	192.168.8.2:34690 -> 202.124.124.84:53	MULTIPLE:SINGLE	1 / 1	76 B / 108 B	
                          WAN	tcp	192.168.8.2:62217 (172.16.101.15:1449) -> 202.124.124.91:80	FIN_WAIT_2:FIN_WAIT_2	5 / 5	306 B / 391 B	
                          WAN	tcp	192.168.8.2:43879 (172.16.101.15:1450) -> 202.124.124.91:80	FIN_WAIT_2:FIN_WAIT_2	6 / 5	346 B / 391 B	
                          WAN	udp	192.168.8.2:23297 (172.16.101.15:50903) -> 142.250.204.4:443	MULTIPLE:MULTIPLE	5 / 5	3 KiB / 3 KiB	
                          WAN	udp	192.168.8.2:5215 (172.16.101.5:123) -> 103.242.68.69:123	MULTIPLE:SINGLE	1 / 1	76 B / 76 B	
                          WAN	udp	192.168.8.2:7924 (172.16.101.5:123) -> 162.159.200.1:123	MULTIPLE:SINGLE	1 / 1	76 B / 76 B	
                          WAN	udp	192.168.8.2:20410 (172.16.101.5:123) -> 163.47.220.60:123	MULTIPLE:SINGLE	1 / 1	76 B / 76 B	
                          WAN	tcp	192.168.8.2:19162 (172.16.101.15:1451) -> 52.41.50.6:443	ESTABLISHED:ESTABLISHED	11 / 11	2 KiB / 6 KiB	
                          WAN	tcp	192.168.8.2:48761 (172.16.101.17:50854) -> 44.226.92.23:443	ESTABLISHED:ESTABLISHED	10 / 11	2 KiB / 6 KiB
                          
                          johnpozJ 1 Reply Last reply Reply Quote 0
                          • johnpozJ
                            johnpoz LAYER 8 Global Moderator @deanfourie
                            last edited by

                            @deanfourie I don't see any states to that 8. address.

                            So pfsense didn't create, nor did a client create a connection to there.. Do a simple filter on your state table for the IPs in question.

                            If you do not see any states then pfsense did not create the connection, nor did a client behind pfsense.

                            And what you could be seeing could be SA scan, that is being interpreted wrong???

                            But if your concerned that pfsense, or something behind pfsense is creating connections to somewhere it shouldn't be - look in the state table.. If a connection attempt was made from or through pfsense then a state would exist. Even if the connection was not established.

                            Here - trying to ping one of those IPs.. Even though not getting an answer, you can see the state in the state table from pfsense

                            ping.jpg

                            An intelligent man is sometimes forced to be drunk to spend time with his fools
                            If you get confused: Listen to the Music Play
                            Please don't Chat/PM me for help, unless mod related
                            SG-4860 24.11 | Lab VMs 2.8, 24.11

                            D 1 Reply Last reply Reply Quote 0
                            • D
                              deanfourie @johnpoz
                              last edited by deanfourie

                              @johnpoz Ok great ill do this.

                              I hate working with upstream gateways and double natting, would much rather put the router in bridged mode and get WAN IP from DHCP and boom! Last time I did this I was on the naughty list with the ISP. They warned me

                              I will do more careful watching of the state table. My concern is actually with the 4G router still though,

                              If its doing some sort of dodgy proxying at the 4G router, I'm not going to be able to see that from pfSense WAN side as its before the WAN interface.

                              I mean at the end of the day, it is a Huawei router...

                              I cant even disable TR-069 on it, nor can I change the LAN subnet mask.

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                If you're concerned about it the only thing you can really do is tunnel all your traffic through it so the router never sees inside it. There is obviously overhead to doing that though.

                                Steve

                                D 1 Reply Last reply Reply Quote 0
                                • D
                                  deanfourie @stephenw10
                                  last edited by

                                  @stephenw10 I originally was routing all traffic through a VPN, however I got so many more weird connections as a result.

                                  One question I do have is, would doubling NATting effect the results of the flows in ntopng.

                                  Like matching ports and applications etc?

                                  Thanks

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    No I wouldn't expect it to. The source/destination ports/IPs that ntop can see are still the same.

                                    D 1 Reply Last reply Reply Quote 0
                                    • D
                                      deanfourie @stephenw10
                                      last edited by

                                      @stephenw10 said in Suspicious Traffic?:

                                      No I wouldn't expect it to. The source/destination ports/IPs that ntop can see are still the same.

                                      Thank you

                                      1 Reply Last reply Reply Quote 0
                                      • D
                                        deanfourie
                                        last edited by deanfourie

                                        Maybe someone could take a look at this capture. Lots of SSH from 192.168.8.2 which is my pfSense firewall.

                                        Also a lot of TCP retransmissions. I'm not sure how my pfSense could be sending out SSH traffic?

                                        capture.pcap

                                        johnpozJ 1 Reply Last reply Reply Quote 0
                                        • johnpozJ
                                          johnpoz LAYER 8 Global Moderator @deanfourie
                                          last edited by johnpoz

                                          @deanfourie pfsense out of the box would not be doing any ssh outbound..

                                          You would see retrans when you send a syn and you don't get an answer..

                                          Did you look in your state table for those IPs to what behind pfsense might be trying to talk to those IPs.. Looks like Ips on your ISP network.

                                          ;; ANSWER SECTION:
                                          22.239.24.86.in-addr.arpa. 86400 IN     PTR     cpc152131-stkp13-2-0-cust21.10-2.cable.virginm.net.
                                          

                                          Dude do you have Ntopng running in discovery mode on your wan?? That would for sure freaking do it..

                                          ntop.jpg

                                          An intelligent man is sometimes forced to be drunk to spend time with his fools
                                          If you get confused: Listen to the Music Play
                                          Please don't Chat/PM me for help, unless mod related
                                          SG-4860 24.11 | Lab VMs 2.8, 24.11

                                          D 1 Reply Last reply Reply Quote 0
                                          • D
                                            deanfourie @johnpoz
                                            last edited by

                                            @johnpoz Heres what I found in the states table.

                                            Capture.PNG

                                            johnpozJ 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.