I don't know were to begin... Cloudflare and the dreaded 522 error

swemattias

@johnpoz Of course... that setting I picked up somewhere.
Like this?

I still get an 522 btw.

swemattias

@viragomann Any tips how to best do that? Something lurking inside pfSense?

viragomann

@swemattias
Diagnostic > Packet Capture

Select WAN at interface. At port enter "80|443". Hit Start.
Trigger some packets by trying to access your web server from the internet. Stop the capture and check the result if you see any packet.

johnpoz

@swemattias are you actually creating a port forward, creating wan rules with destination of your lan side IP is not going to work without a port forward.

Again that rule is not have any evaluations 0/0

To sniff on your wan, under diagnostics packet capture.. Should be simple enough to just go to can you see me .org and try port 443 for example while you do the packet capture.

Do you have floating rules? Lets see your port forwards..

swemattias

@johnpoz I has only opened the port like I have done so many times before. But I did create an Port Forward under NAT now.
It is a, a translated Swedish saying, fall forward. I don't get an 522 but still an time out....

In the packet sniffing I do see this from time to time:

20:34:15.581150 IP my.external.ip.12483 > 108.157.214.15.443: tcp 0
20:34:15.581483 IP my.external.ip.12483 > 108.157.214.15.443: tcp 517

Here are the whole packet sniff result.
Sniffing result

I am not used or have any valuable knowledge looking at packet sniffing results...

viragomann

@swemattias said in I don't know were to begin... Cloudflare and the dreaded 522 error:

In the packet sniffing I do see this from time to time:
20:34:15.581150 IP my.external.ip.12483 > 108.157.214.15.443: tcp 0
20:34:15.581483 IP my.external.ip.12483 > 108.157.214.15.443: tcp 517

This might be outbound connections.

But obviously nothing hits my.external.ip.443. So you should look in front of your pfSense for the failure.
Maybe there is something wrong on Cloudflare.

swemattias

I did redid my Port forwards under NAT, to divide them into 80 and 443 so they are more clear.
And suddenly it all started to work.

Thank you for helping me, means more to me than you will ever know.

So thank you @johnpoz @Cool_Corona and @viragomann

johnpoz

@swemattias said in I don't know were to begin... Cloudflare and the dreaded 522 error:

only opened the port like I have done so many times before

I don't know what you were doing before - maybe you had haproxy listening on your wan before, then no you wouldn't need a port forward.

If you want traffic to hit your public IP on wan, and get sent to some rfc1918 address behind you have to do a port forward. Unless your using haproxy as a reverse proxy to have that do that for you.

swemattias

@johnpoz I ditched HAProxy and went to Traefik and all is working now. :)

0scale

This post is deleted!