Need some help getting a lcd to work on a infoblox Trinzic 1400

stephenw10

Ah I see that it is. In which case check what ports actually exist in /dev. It may not be USB serial.

pvonnur

Here are the devices:

I will be opening the box up to see if I can determine the manufacturer of the LCD. (Thanks for the help)

stephenw10

Ok, so cuaU0 is a USB connected serial device so it's probably the LCD module unless you have something else configured there.

Try running usbconfig dump_device_desc

That will at least show you what USB/serial chip is in use. To know what driver to use though will probably require some visual examination.

Steve

pvonnur

@stephenw10 Below the output:

ugen1.1: <Intel EHCI root HUB> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Intel>
  iProduct = 0x0002  <EHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

ugen0.1: <Intel EHCI root HUB> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Intel>
  iProduct = 0x0002  <EHCI root HUB>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

ugen0.2: <vendor 0x8087 product 0x0020> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x8087
  idProduct = 0x0020
  bcdDevice = 0x0000
  iManufacturer = 0x0000  <no string>
  iProduct = 0x0000  <no string>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

ugen1.2: <vendor 0x8087 product 0x0020> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <HUB>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x8087
  idProduct = 0x0020
  bcdDevice = 0x0000
  iManufacturer = 0x0000  <no string>
  iProduct = 0x0000  <no string>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0110
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0557
  idProduct = 0x2221
  bcdDevice = 0x0001
  iManufacturer = 0x0001  <Winbond Electronics Corp>
  iProduct = 0x0002  <Hermon USB hidmouse Device>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

ugen0.4: <Microchip Technology Inc. CDC RS-232 Emulation Demo> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0002  <Communication device>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0008
  idVendor = 0x04d8
  idProduct = 0x000a
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Microchip Technology Inc.>
  iProduct = 0x0002  <CDC RS-232 Emulation Demo>
  iSerialNumber = 0x0000  <no string>
  bNumConfigurations = 0x0001

stephenw10

Mmm, OK so looks like it might have a separate USB input device for the buttons.

Yeah, you'll need to try to get some more info from the LCD module itself.

pvonnur

Attached some additional information and pictures I found on ebay of a similar/identical model (pictures show B0478 and mine is B4985 but all connectors are the same):

PM8664 1351IB4985
219-0001-000 REV10 SW 0.53

pvonnur

The LCD documentation can be found here -

https://www.seacomp.com/sites/default/files/datasheets/DT018ATFT-Displaytech-Spec.pdf

Is there a suitable driver in pfSense?

stephenw10

Probably not. That looks like a PIC controller which could be running some custom code. It might require a significant reverse engineering effort.

Try disabling lcdproc and opening the USB serial port at the command line. You might at least be able to determine the serial baud rate it's operating at which would help you test other drivers. There might be some other clues there.

Steve

fmertz

It looks like what would matter to a driver is this PIC24 from Microchip, listed here:

PIC24FJ256DA210

"The PIC24F-DA family features integrated graphics acceleration and a display controller to directly drive displays up to 4.3" WQVGA with 480 × 272 resolution. Ideal for Graphical interface applications that can benefit from the integrated Graphics, 96K byte RAM for frame buffer, mTouch, USB and other peripherals."

This looks more like a full blown mini graphics card over USB...

stephenw10

Well.... that could be fun!