pfSense newbie: can it run in a VM and handle a 10Gb/s ISP line?
-
Yes, me too. But I recall being surprised any VM could push 10G when I first saw it. That was some time ago and I can't be sure what the hypervisor being used was. I think it was ESXi though.
-
@stephenw10 ESXi
-
Nice. I assume you need the multiqueue blacklist tweak for vmxnet NICs to reach that?
-
Woah lots of questions here, but my bad I had actually to say what hardware I was using and it's nothing special so I guess myself it won't nearly match the needed specs right...?
-
INTEL Core i3-4130
-
2x8GB DDR4 RAM
-
INTEL X540-T2 NIC card
WLAN: yes I meant Wi-Fi, but all I want is to secure manage the wireless IP cameras and Synology Surveillance Station traffic.
Seeing your posts about beefy hardware needed I wonder if a Netgate 6100 would be actually able to carry all the load needed here?
-
-
@stephenw10 I dont use passthrough nics...
-
@Cool_Corona
Right but if you use vmxnet NICs to the VM you need to disable the blacklist to get pfSense to use multiple queues on them. Which I would expect to be required to pass 10Gbps.@Cr4z33
No I would not expect an i3-4130 to pass that as a hypervisor. Though it may get close I've never tried ESXi on something like that.And no I would not expect to see 10Gbps through a 6100 if it's NATing and filtering the traffic. Especially if that's a single stream TCP test.
Steve
-
@cr4z33 You will not reach 10gbit/s on the hardware.
You need Xeon CPU's.
We run this in our testrigs to compare opnsense to pfsense
https://www.supermicro.com/en/products/system/iot/1u/sys-510d-10c-fn6p
-
@stephenw10 On current ESXi its not needed and on the older ones it hardly made a difference.
-
@cool_corona cheers mate gonna see if I can find a deal on eBay then for some used unit.
-
@cr4z33 https://www.serverworlds.com/refurbished-lenovo-x3550-m5-sff-configured-to-order-8869-ac1/
-
FWIW, even my ancient 2012R2 Hyper-V VM on a 14 year old host shows the logical interface as 10G, but I think you would need a very high power host to come near the packet processing power needed. Free standing host would be better. Then again, I can't even imagine needing 10G unless I had thousands of users anyway. But I'm a dinosaur.
-
@provels You need new nics and xeon's to reach it... and not running it in a Hyper-V environment.
-
@cool_corona said in pfSense newbie: can it run in a VM and handle a 10Gb/s ISP line?:
on the older ones it hardly made a difference.
Hmm, that's very much not been my experience when working with customers virtual installs. Setting that value usually dramatically increased throughput or reduced per core CPU loading. Though that won't be the case in FreeBSD main builds.
Steve
-
@cool_corona said in pfSense newbie: can it run in a VM and handle a 10Gb/s ISP line?:
@provels You need new nics and xeon's to reach it... and not running it in a Hyper-V environment.
Would be less than worthless on my 75Mb WAN, my GB LAN and 54Mb WLAN...
-
@provels Yeah...
-
This post is deleted! -
@cool_corona said in pfSense newbie: can it run in a VM and handle a 10Gb/s ISP line?:
@cr4z33 https://www.serverworlds.com/refurbished-lenovo-x3550-m5-sff-configured-to-order-8869-ac1/
Thanks mate, but living in the EU that would cost me too much hehe.
I have however found a refurbished Supermicro CSE815 - X10SLH-LN6TF / N6-ST031 for quite a very interesting price.
Would that finally be good for my needs?
Might also be a good purchase to start learning networking in a more serious way for me. -
@cr4z33 said in pfSense newbie: can it run in a VM and handle a 10Gb/s ISP line?:
CSE815 - X10SLH-LN6TF
No that CPU cant handle it...
-
@cool_corona alright may I ask you then what Xeon CPUs suite my needs so that I can monitor the eBay bargains?
-
@cr4z33 Core count is not that important but CPU speed is.
https://www.intel.com/content/www/us/en/products/details/processors/xeon/d/products.html
Look after something on this list if you can...
