Supported CPU C-States

[mrsunfire]

Got an i7-1165G7 but I never get to see C2 or C3. All I get is this:

dev.cpu.3.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.3.cx_usage_counters: 46820 0 0
dev.cpu.3.cx_usage: 100.00% 0.00% 0.00% last 171us
dev.cpu.3.cx_lowest: C1
dev.cpu.3.cx_supported: C1/1/1 C2/2/253 C3/3/1048
dev.cpu.2.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.2.cx_usage_counters: 46701 0 0
dev.cpu.2.cx_usage: 100.00% 0.00% 0.00% last 141us
dev.cpu.2.cx_lowest: C1
dev.cpu.2.cx_supported: C1/1/1 C2/2/253 C3/3/1048
dev.cpu.1.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.1.cx_usage_counters: 46400 0 0
dev.cpu.1.cx_usage: 100.00% 0.00% 0.00% last 149us
dev.cpu.1.cx_lowest: C1
dev.cpu.1.cx_supported: C1/1/1 C2/2/253 C3/3/1048
dev.cpu.0.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.0.cx_usage_counters: 56149 0 0
dev.cpu.0.cx_usage: 100.00% 0.00% 0.00% last 237us
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_supported: C1/1/1 C2/2/253 C3/3/1048

Did try the settings written here: https://wiki.freebsd.org/TuningPowerConsumption nothing helped. BIOS C-states enabled of course.

What am I missing?

[stephenw10]

You have to set dev.cpu.X.cx_lowest to C3 if you want it to use them. All 4 cores are restricted to C1 only in that output.

Steve

[mrsunfire]

@stephenw10 I've set it to Cmax. Is that wrong?

[mvikman]

I added this to System Tunables

"sysctl dev.cpu | grep cx" showes this, so I guess it's working

dev.cpu.3.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.3.cx_usage_counters: 128 166 6341
dev.cpu.3.cx_usage: 1.92% 2.50% 95.56% last 2086us
dev.cpu.3.cx_lowest: C3
dev.cpu.3.cx_supported: C1/1/1 C2/2/151 C3/3/256
dev.cpu.2.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.2.cx_usage_counters: 174 154 6615
dev.cpu.2.cx_usage: 2.50% 2.21% 95.27% last 32us
dev.cpu.2.cx_lowest: C3
dev.cpu.2.cx_supported: C1/1/1 C2/2/151 C3/3/256
dev.cpu.1.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.1.cx_usage_counters: 221 220 16075
dev.cpu.1.cx_usage: 1.33% 1.33% 97.32% last 368us
dev.cpu.1.cx_lowest: C3
dev.cpu.1.cx_supported: C1/1/1 C2/2/151 C3/3/256
dev.cpu.0.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.0.cx_usage_counters: 142 210 13944
dev.cpu.0.cx_usage: 0.99% 1.46% 97.53% last 14974us
dev.cpu.0.cx_lowest: C3
dev.cpu.0.cx_supported: C1/1/1 C2/2/151 C3/3/256

[mrsunfire]

@mvikman Thanks! For pfSense hw.acpi.cpu.cx_lowest is the right command. I've set it to Cmax.

Did you set anything for "kern.hz"? My CPU seems to stay mostly at C1.

dev.cpu.3.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.3.cx_usage_counters: 411155 21225 1607
dev.cpu.3.cx_usage: 94.73% 4.89% 0.37% last 145us
dev.cpu.3.cx_lowest: C8
dev.cpu.3.cx_supported: C1/1/1 C2/2/253 C3/3/1048
dev.cpu.2.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.2.cx_usage_counters: 427522 21371 1503
dev.cpu.2.cx_usage: 94.92% 4.74% 0.33% last 130us
dev.cpu.2.cx_lowest: C8
dev.cpu.2.cx_supported: C1/1/1 C2/2/253 C3/3/1048
dev.cpu.1.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.1.cx_usage_counters: 434369 22616 1595
dev.cpu.1.cx_usage: 94.72% 4.93% 0.34% last 131us
dev.cpu.1.cx_lowest: C8
dev.cpu.1.cx_supported: C1/1/1 C2/2/253 C3/3/1048
dev.cpu.0.cx_method: C1/mwait/hwc C2/mwait/hwc C3/mwait/hwc
dev.cpu.0.cx_usage_counters: 457227 29227 1425
dev.cpu.0.cx_usage: 93.71% 5.99% 0.29% last 191us
dev.cpu.0.cx_lowest: C8
dev.cpu.0.cx_supported: C1/1/1 C2/2/253 C3/3/1048

[stephenw10]

Mmm, @mvikman's CPU must be very lightly used. Anything I've ever tried that on looks more like your output there, mostly in C1.

[fireodo]

@mrsunfire said in Supported CPU C-States:

@mvikman Thanks! For pfSense hw.acpi.cpu.cx_lowest is the right command. I've set it to Cmax.

Did you set anything for "kern.hz"? My CPU seems to stay mostly at C1.

If the operating system states:

dev.cpu.0.cx_supported: C1/1/1 C2/2/253 C3/3/1048

why do you think you can go

dev.cpu.0.cx_lowest: C8

below C3?

Just asking out of curiosity :-)

[stephenw10]

It won't ever go below 3 but I wouldn't expect it to hurt.

[mrsunfire]

@fireodo C8 is max my CPU is supporting. I just set Cmax in system tunables. So I think the CPU decides the max limit even though FreeBSD only supports C3.

[mvikman]

@stephenw10 said in Supported CPU C-States:

Mmm, @mvikman's CPU must be very lightly used. Anything I've ever tried that on looks more like your output there, mostly in C1.

LOL yeah, it's just my home router and it's got a i5-6500, just haven't had time to dabble with pfblocker and such things yet

@mrsunfire No, that was the only line I added.

Though I have PowerD set to Adaptive instead of HiAdaptive because HiAdaptive doesn't seem let CPU to throttle speed lower MHz...