23.01.b.20230106.0600 IGMP proxy stops TV stream

[stephenw10]

I don't see an updated pkg in the repos yet. 0.3,1 is the original pkg. I'll update here when it's available.

[thebear]

@stephenw10 tnx will edit my post about the upgrade cli, its not valid information then.

[stephenw10]

It will be.

You can see the build date in the pkg info:

[23.01-RELEASE][root@6100.stevew.lan]/root: pkg info igmpproxy
igmpproxy-0.3,1
Name           : igmpproxy
Version        : 0.3,1
Installed on   : Sun Jan  8 16:49:53 2023 GMT
Origin         : net/igmpproxy
Architecture   : FreeBSD:14:amd64
Prefix         : /usr/local
Categories     : net
Licenses       : GPLv2+
Maintainer     : franco@opnsense.org
WWW            : https://github.com/pali/igmpproxy
Comment        : Multicast forwarding IGMP proxy
Annotations    :
	FreeBSD_version: 1400073
	build_timestamp: 2023-01-07T20:09:23+0000
	built_by       : poudriere-git-3.3.99.20220831
	port_checkout_unclean: no
	port_git_hash  : c265aeb485a2
	ports_top_checkout_unclean: yes
	ports_top_git_hash: c9915d224e16
	repo_type      : binary
	repository     : pfSense
Flat size      : 45.6KiB
Description    :
igmpproxy is a simple multicast routing daemon based on mrouted. It uses IGMP
forwarding to dynamically route multicast traffic.
Reqiures multicast forwarding enabled

WWW: https://github.com/pali/igmpproxy

[hjongedijk]

So in order to update this patch/fix for IGMP in 23.01 i should do the follow?

in Shell >

fetch https://redmine.pfsense.org/attachments/download/4714/igmpproxy-0.3_1.pkg
pkg add -f igmpproxy-0.3_1.pkg

or is there another way to apply this fix?

[stephenw10]

Right now that's the best way.

[jrueger]

@stephenw10 Will there also be a version for aarch64 in the repos? This would be for only the 2100 appliance (since I don't think 23.01 is available for the 1100). Maybe I should have splurged and purchased the 4100.

[stephenw10]

Yes, it should be available for all architectures. Including on the 1100.

[jrueger]

Does that mean that it will be available as a System Patch in Patch Manager? Sorry for the dumb questions as I'm learning how to administer a pfsense box.

[stephenw10]

No it's not a runtime patch it requires a new binary so it will appear as an updatable pkg from the command line. That's not a usual way to upgrade/patch in pfSense but otherwise it would only be in the next release.

[Dobby_]

@stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

No it's not a runtime patch it requires a new binary so it will appear as an updatable pkg from the command line. That's not a usual way to upgrade/patch in pfSense but otherwise it would only be in the next release.

fetch https://redmine.pfsense.org/attachments/download/4714/igmpproxy-0.3_1.pkg
pkg add -f igmpproxy-0.3_1.pkg

and after this a...

pkg install igmpproxy-0.3_1.pkg

Y = for YES

And then all is done?

[stephenw10]

Yes, you only need to upgrade the pkg. Everything else will start using that.

[jrueger]

@stephenw10 but this is still only for amd64?

[stephenw10]

Yes, the pkg file attached to the redmine is amd64.
pkgs for all architectures should be available when the repo builds update.

[jrueger]

@stephenw10 ok then I'm lost and confused ... where is the "repo builds update" located? On github/pfsense or somewhere else?

[stephenw10]

Sorry I typo'd that.

When our pkg builders next run I expect to see an updated package available in our repos.

So running pkg upgrade igmpproxy at the command line will show it.

[jrueger]

@stephenw10 Ah I get it now ... thanks for explaining things to a newbie.

[Remie2000]

I can confirm that this package fixes the IGMP problems!

Thanks a lot!

[Dobby_]

@stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

Yes, you only need to upgrade the pkg. Everything else will start using that.

Thank you very much for that information.

I installed like above shown with the commands and then
I was setting up another one on top, like;

pkg upgrade

It shows me then there will be an upgrade named:
igmpproxy-0.3,1.pkg
It upgraded the first loaded from "outside" packed named
igmpproxy-0.3-1, was this a failure was it now reinstalling the older version or another one or was it only a typo?

[stephenw10]

No if you look back in this thread that was explained. 0.3,1 is the original version from 23.01, the pkg system sees that as numerically newer than 0.3_1 allows you to "upgrade" to it. If you check pkg info igmpproxy you will see the build date for 0.3,1 is in Jan.

Steve

[mxt3rs]

i have updated bug tracker with arm pkg if someone wants to try

https://redmine.pfsense.org/attachments/download/4733/igmpproxy-aarch64-0.3,1.pkg