23.01.b.20230106.0600 IGMP proxy stops TV stream

thebear

@stephenw10 tnx will edit my post about the upgrade cli, its not valid information then.

stephenw10

It will be.

You can see the build date in the pkg info:

[23.01-RELEASE][root@6100.stevew.lan]/root: pkg info igmpproxy
igmpproxy-0.3,1
Name           : igmpproxy
Version        : 0.3,1
Installed on   : Sun Jan  8 16:49:53 2023 GMT
Origin         : net/igmpproxy
Architecture   : FreeBSD:14:amd64
Prefix         : /usr/local
Categories     : net
Licenses       : GPLv2+
Maintainer     : franco@opnsense.org
WWW            : https://github.com/pali/igmpproxy
Comment        : Multicast forwarding IGMP proxy
Annotations    :
	FreeBSD_version: 1400073
	build_timestamp: 2023-01-07T20:09:23+0000
	built_by       : poudriere-git-3.3.99.20220831
	port_checkout_unclean: no
	port_git_hash  : c265aeb485a2
	ports_top_checkout_unclean: yes
	ports_top_git_hash: c9915d224e16
	repo_type      : binary
	repository     : pfSense
Flat size      : 45.6KiB
Description    :
igmpproxy is a simple multicast routing daemon based on mrouted. It uses IGMP
forwarding to dynamically route multicast traffic.
Reqiures multicast forwarding enabled

WWW: https://github.com/pali/igmpproxy

hjongedijk

So in order to update this patch/fix for IGMP in 23.01 i should do the follow?

in Shell >

fetch https://redmine.pfsense.org/attachments/download/4714/igmpproxy-0.3_1.pkg
pkg add -f igmpproxy-0.3_1.pkg

or is there another way to apply this fix?

stephenw10

Right now that's the best way.

jrueger

@stephenw10 Will there also be a version for aarch64 in the repos? This would be for only the 2100 appliance (since I don't think 23.01 is available for the 1100). Maybe I should have splurged and purchased the 4100.

stephenw10

Yes, it should be available for all architectures. Including on the 1100.

jrueger

Does that mean that it will be available as a System Patch in Patch Manager? Sorry for the dumb questions as I'm learning how to administer a pfsense box.

stephenw10

No it's not a runtime patch it requires a new binary so it will appear as an updatable pkg from the command line. That's not a usual way to upgrade/patch in pfSense but otherwise it would only be in the next release.

Dobby_

@stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

No it's not a runtime patch it requires a new binary so it will appear as an updatable pkg from the command line. That's not a usual way to upgrade/patch in pfSense but otherwise it would only be in the next release.

fetch https://redmine.pfsense.org/attachments/download/4714/igmpproxy-0.3_1.pkg
pkg add -f igmpproxy-0.3_1.pkg

and after this a...

pkg install igmpproxy-0.3_1.pkg

Y = for YES

And then all is done?

stephenw10

Yes, you only need to upgrade the pkg. Everything else will start using that.

jrueger

@stephenw10 but this is still only for amd64?

stephenw10

Yes, the pkg file attached to the redmine is amd64.
pkgs for all architectures should be available when the repo builds update.

jrueger

@stephenw10 ok then I'm lost and confused ... where is the "repo builds update" located? On github/pfsense or somewhere else?

stephenw10

Sorry I typo'd that.

When our pkg builders next run I expect to see an updated package available in our repos.

So running pkg upgrade igmpproxy at the command line will show it.

jrueger

@stephenw10 Ah I get it now ... thanks for explaining things to a newbie.

Remie2000

I can confirm that this package fixes the IGMP problems!

Thanks a lot!

Dobby_

@stephenw10 said in 23.01.b.20230106.0600 IGMP proxy stops TV stream:

Yes, you only need to upgrade the pkg. Everything else will start using that.

Thank you very much for that information.

I installed like above shown with the commands and then
I was setting up another one on top, like;

pkg upgrade

It shows me then there will be an upgrade named:
igmpproxy-0.3,1.pkg
It upgraded the first loaded from "outside" packed named
igmpproxy-0.3-1, was this a failure was it now reinstalling the older version or another one or was it only a typo?

stephenw10

No if you look back in this thread that was explained. 0.3,1 is the original version from 23.01, the pkg system sees that as numerically newer than 0.3_1 allows you to "upgrade" to it. If you check pkg info igmpproxy you will see the build date for 0.3,1 is in Jan.

Steve

mxt3rs

i have updated bug tracker with arm pkg if someone wants to try

https://redmine.pfsense.org/attachments/download/4733/igmpproxy-aarch64-0.3,1.pkg

Fretboard36

@mxt3rs Great job! I've installed the arm package on my Netgate 2100 and the IP-TV streams are working flawless again.