SG-3100 23.01 clean install

mcury

@fsc830 said in SG-3100 23.01 clean install:

During my update I did not see such an error referring to u-boot version.

Perhaps something got corrupted here, I'll reinstall to see if it happens again.
I have a 23.01 clean config here, so it should take 20 minutes or less to do it.

But thanks anyway

stephenw10

On a clean install you will see that because the pkg repo is not populated yet. On an upgrade it already has that data so can check the uboot pkg version.

Both are expected output.

Steve

mcury

SG-3100 running 23.01.

Acme package -> OK (duckdns tested and working).
Wireguard -> OK (client to site tested and working).
PfblockerNG 3.2.0_2 -> OK (using DNSBL python mode, geoIP, tested and working).

The only things that are not clear to me yet are these:
https://forum.netgate.com/post/1088207 -> Package Manager - Available packages empty.
https://forum.netgate.com/post/1087658 -> RAM usage increasing at 03:00 AM (almost double the usage when comparing to 22.01).

stephenw10

Like doubling everyday at 3am or just the first time after install?

You should be able to see packages. What do you see if you run at the command line:
pkg -d update

Steve

mcury

@stephenw10 said in SG-3100 23.01 clean install:

You should be able to see packages. What do you see if you run at the command line:
pkg -d update

Since my last update on that thread, I installed pfblockerNG and Wireguard packages.

The image below, is with pfblockerNG (3.2.0_3 installed, running with python mode).

Note: At this point, the RAM usage is almost similar when compared to 22.05, however something happens around 3:00am that I can't explain, in which increases the inactive RAM usage.

top -HaSP
then pressed 'o' and sorted by res;

Tomorrow, after 3AM, I'll provide the same output for comparison purposes.

Follows below the output from the command suggested:

[23.01-RELEASE][root@pfsense.home.arpa]/root: pkg -d update
DBG(1)[41832]> pkg initialized
Updating pfSense-core repository catalogue...
DBG(1)[41832]> PkgRepo: verifying update for pfSense-core
DBG(1)[41832]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense-core.sqlite'
DBG(1)[41832]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_01_armv7-core/meta.conf
DBG(1)[41832]> opening libfetch fetcher
DBG(1)[41832]> Fetch > libfetch: connecting
DBG(1)[41832]> Fetch: fetching from: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-core/meta.conf with opts "i"
DBG(1)[41832]> Fetch: fetcher chosen: https
DBG(1)[41832]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_01_armv7-core/packagesite.pkg
DBG(1)[41832]> opening libfetch fetcher
DBG(1)[41832]> Fetch > libfetch: connecting
DBG(1)[41832]> Fetch: fetching from: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-core/packagesite.pkg with opts "i"
DBG(1)[41832]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_01_armv7-core/packagesite.txz
DBG(1)[41832]> opening libfetch fetcher
DBG(1)[41832]> Fetch > libfetch: connecting
DBG(1)[41832]> Fetch: fetching from: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-core/packagesite.txz with opts "i"
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
DBG(1)[41832]> PkgRepo: verifying update for pfSense
DBG(1)[41832]> Pkgrepo, begin update of '/var/db/pkg/repo-pfSense.sqlite'
DBG(1)[41832]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/meta.conf
DBG(1)[41832]> opening libfetch fetcher
DBG(1)[41832]> Fetch > libfetch: connecting
DBG(1)[41832]> Fetch: fetching from: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/meta.conf with opts "i"
DBG(1)[41832]> Fetch: fetcher chosen: https
DBG(1)[41832]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/packagesite.pkg
DBG(1)[41832]> opening libfetch fetcher
DBG(1)[41832]> Fetch > libfetch: connecting
DBG(1)[41832]> Fetch: fetching from: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/packagesite.pkg with opts "i"
DBG(1)[41832]> Request to fetch pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/packagesite.txz
DBG(1)[41832]> opening libfetch fetcher
DBG(1)[41832]> Fetch > libfetch: connecting
DBG(1)[41832]> Fetch: fetching from: https://pfsense-plus-pkg00.atx.netgate.com/pfSense_plus-v23_01_armv7-pfSense_plus_v23_01/packagesite.txz with opts "i"
pfSense repository is up to date.
All repositories are up to date.

SteveITS

@mcury said in SG-3100 23.01 clean install:

something happens around 3:00am

https://forum.netgate.com/topic/178023/1100-upgrade-22-05-23-01-high-mem-usage/30
"cause by "periodic daily" that runs at 3:00am
...
Blue line is [poster] "pretending" it is currently 3:00am and running "period daily" from an ssh session...

there goes the memory."

It seems to just be on the first 3:00 am after install.

mcury

@steveits said in SG-3100 23.01 clean install:

It seems to just be on the first 3:00 am after install.

Hm.. I'm facing this problem for more than 48hrs after install..
I'll get the output tomorrow to confirm.

Its 22:20 right now and I'm going to sleep.. Tomorrow I'll post here the RAM usage for comparison.
But thanks for the info.

stephenw10

The package update looks good. You should see packages populated in the package manager.

SteveITS

@mcury said in SG-3100 23.01 clean install:

facing this problem for more than 48hrs after install

I meant, the big increase in RAM usage is the first night, then for me and others RAM usage is basically constant after that. It doesn't drastically decrease every night.

FSC830

Yes, seems so.
Last night, no more jump in memory usage was seen.
See also here.
I the meantime countless threads about RAM usage in 23.01 exists, its hard, to keep an overview.

Regards

mcury