PC Engines APU2 - 23.01- Working fine
-
Me too!
APU4D4 here, with modem, WLAN and GPS card.
All is running fine after one extra upgrade (console)
and a second reboot. Now all is fine running and
also the packets are up to date.PC engines APU4 - 23.01 RC
-
What lte and gps card are you using?
-
GPS:
u-Blox VGB-800 (used, 2nd hand)
U-blox chipset sorted miniPCIe card with ublox LEAS-6S
For around ~12 € at eBay.deLTE 4G Modem:
Sierra Wireless MC7710 (used, 2nd hand)
For around ~35 € from eBay.de with an external case over USB connection and antennas included.A picture can be seen here in that post.
GPS miniPCIe card support -
@jasonau Could I ask what site you downloaded the Coreboot firmware from?
I tried https://pcengines.github.io/ but all the links are no longer working.
Thanks.
-
I am sorry I don´t know, because the links are not
working, and I don´t know if this will be for a while
or forever. I only own the "apu4_v4.19.0.1.zip" with
ROM file, Signature and Hash inside, I was loading
it up here, so if you are using APU4 (only) you may
take it. If you use it, please don`t forget to do a cold
boot with un powering the APU after the upgrade
that not the old one (BIOS) will be in usage again.You may use it on your own risk, I am using it since
the release day, without any issues, because I want to
install next month the TPM 2.0 module too, in my APU4. -
@blinky said in PC Engines APU2 - 23.01- Working fine:
@jasonau Could I ask what site you downloaded the Coreboot firmware from?
I signed up for the e-mails, I got the last one
PC Engines apu coreboot Open Source Firmware v4.17.0.3
https://3mdeb.com/open-source-firmware/pcengines/apu1/apu1_v4.17.0.3.zip
https://3mdeb.com/open-source-firmware/pcengines/apu2/apu2_v4.17.0.3.zip
https://3mdeb.com/open-source-firmware/pcengines/apu3/apu3_v4.17.0.3.zip
https://3mdeb.com/open-source-firmware/pcengines/apu5/apu5_v4.17.0.3.zipThe links do appear a bit broken ATM,
-
@jasonau
Also try this page https://pcengines.github.io/Note they have the update
Dear PC Engines hardware owners, -
@dobby_ Thanks, that's nice of you to upload it. Unfortunately I use an apu2e4. I was planning on installing version apu2_4.16.04, or possibly newer.
-
@jasonau Yes, all those links are dead. It sounds like they want to start charging for it.
-
@blinky said in PC Engines APU2 - 23.01- Working fine:
@dobby_ Thanks, that's nice of you to upload it. Unfortunately I use an apu2e4. I was planning on installing version apu2_4.16.04, or possibly newer.
This list is loading for me
https://3mdeb.com/open-source-firmware/pcengines/apu2/
Brisbane Queensland Australia
-
@jasonau Thanks, that did the trick.
Or maybe they fixed those dead links. Anyway, cheers! -
@jasonau said in PC Engines APU2 - 23.01- Working fine:
@blinky said in PC Engines APU2 - 23.01- Working fine:
@dobby_ Thanks, that's nice of you to upload it. Unfortunately I use an apu2e4. I was planning on installing version apu2_4.16.04, or possibly newer.
This list is loading for me
https://3mdeb.com/open-source-firmware/pcengines/apu2/
Me too! Thanks for the link
-
@fireodo said in PC Engines APU2 - 23.01- Working fine:
@jasonau said in PC Engines APU2 - 23.01- Working fine:
PC Engines APU2
Do you use apuled?
Thanks,
fireodoDid you get it working? Iam using 23.05 RC and 2.7 now
and I only got informations that this will not working anymore and three "lines" for the /boot.loader.conf(.local).
But I also were never finding the led or blinkled pkg anymore in the repos too! -
@dobby_ said in PC Engines APU2 - 23.01- Working fine:
Did you get it working? Iam using 23.05 RC and 2.7 now
No. There is no kernel module for freeBSD 14 :-(
-
@fireodo said in PC Engines APU2 - 23.01- Working fine:
@dobby_ said in PC Engines APU2 - 23.01- Working fine:
Did you get it working? Iam using 23.05 RC and 2.7 now
No. There is no kernel module for freeBSD 14 :-(
Thanks for that information then I could save the time for searching for an workaround, I was thinking perhaps I have overlooked something or was not able to find it right.
