Netgate 6100 03.00.00.01t-uc-15 firmware upgrade

93039360

Hello,

I'm having trouble installing 03.00.00.01t-uc-15 firmware on the device.
It's currently running firmware version 02.02.00.02t-uc-15.

When proceeding with Upgrade and Reboot, I'm getting the following error:

The following input errors were detected:

Firmware update failed.
Netgate Firmware update output
dmistore : Creating DMI files...
cannot read chassis_AssetTag
dmistore : DMI files created
mount_msdosfs: /dev/nvd0p1: Operation not permitted
Error mounting EFI partition

And 90 second reboot countdown starts immediately, but no reboot happens.

Quick history of this device:
When I got this device, it was installed with TNSR software, but installed and went for the pfSense Plus because I'm using this 6100 to replace another older pfSense setup.
Before installing the pfSense, I added 128GB NVME drive. Device sees the drive just fine and fresh 23.01 install was done using the memstick image.

Summary of the current device stats:
Current pfSense version: 23.01-RELEASE
Current firmware: 02.02.00.02t-uc-15
Filesystem: ZFS, zpool: pfSense, one vdev visible: /dev/nvd0p4

Any suggestions? Thanks in advance.

stephenw10

You're hitting this: https://redmine.pfsense.org/issues/14043

Run at the CLI or Diag > Command Prompt:

umount /boot/efi

Then re-run the firmware update.

Steve

93039360

@stephenw10

Hi Steve,
I can confirm that did the trick and firmware upgrade was applied.

Thanks!