Package List Empty
-
This post is like I posted in, look at link below: https://forum.netgate.com/post/1097286
-
@bavcon22 , not quite. mine is automatically registered for PFsense+ and will install the PFsense+ upgrade after being reinstalled from disk, but after about a week it loses access to the PFsense+ package repo until I reinstall the entire thing again. additionally, because it thinks it's registered already it wont let me input a new activation key.
Thank you though!
-
What error are you actually seeing when this happens?
If you send me your NDI in chat I can check it.
-
Try this
mkdir /root/backup && cp -r /usr/local/etc/pfSense/pkg/repos /root/backup/ && rm -rf /usr/local/etc/pfSense/pkg/repos && pfSense-upgrade -c -d -
M mfld referenced this topic on
-
@stephenw10 was able to help me resolve it but i'm pretty sure this would have fixed it also.
Many thanks! -
I am having this same issue. I'm building out a new pfSense setup, started on CE and installed a few packages. Applied my Plus configuration and upgraded to 23.01. Now I can no longer see any available packages. It's is resolving, but the certificate is apparently not being passed as I'm getting a 400 Bad Request error. Has this been resolved yet? Is there something I should be doing differently?
-
try the above post from @mfld or the instructions on this page. https://redmine.pfsense.org/issues/14137
-
Yup try the instructions on that bug report first, resave the update repo path. If you just upgraded that's probably the cause.
Steve
-
P p1erre referenced this topic on
-
P p1erre referenced this topic on
-
@stephenw10 said in Package List Empty:
What device do you have? If you send me your NDI in chat I can check it.
Experiencing same issue, will send NDI via chat as well if you could please help and check. Thank you. -
Hey everyone, this was fixed for me by going to System / Update / Update Settings and clicking the Save button without making any changes. Once I did that, the package list came up (I may have forced a refresh too).
-
@jasongreb it works!!!!
-
@jasongreb Works like a charm, thank you!
-
@jasongreb
This also fixed it for me! Thank you! -
Hello guys,
Nothing helped. But in the end, I went to Diagnostics-Backup & Restore and at the bottom is Reinstall all packages. Suddenly everything started to work properly.
-
@jasongreb Same over here in 4 different installs on different customers plus my homelab, went from pfsense CE to pfsense Plus a few days ago, empty "Avaliable packages" list, tried other options (at least the ones that didn't seem too drastic) but this one is the one that worked. Thanks!
-
@jasongreb Thank you sir. This was the simplest solution and worked like a charm
-
@jasongreb said in Package List Empty:
Hey everyone, this was fixed for me by going to System / Update / Update Settings and clicking the Save button without making any changes. Once I did that, the package list came up (I may have forced a refresh too).
Thanks it worked running pfsense 23.05. I think this should be fixed?
-
It should be fixed in 23.05. If you were running a 23.05 dev/beta/rc snapshot it's possible you got stuck on an older version on pfSense-upgrade that still had this bug.
Steve
-
@jasongreb you the man!
-
@yaw sounds like a bug to me. I'm seeing the same thing on CE 2.7.0
