No LAN internet
-
@stephenw10
Stephen
We have satellite broadband. As I showed in my network diagram.
How do you suggest I adjust this.
Leigh -
@hoandco ok so in the advanced section.
What do you suggest,? Could this be the reason "no internet '
Leigh -
@hoandco you prob want this to be 192..
That 182 network is owned by Sony
inetnum: 182.168.0.0 - 182.171.255.255 netname: So-net descr: Sony Network Communications Inc.As stated already your gateway with the highly latency is showing offline - adjust your monitoring to account for the high latency or just mark the gateway as always up.
https://docs.netgate.com/pfsense/en/latest/routing/gateway-configure.html#gateway-settings
-
-
@hoandco
Thanks heaps 182 Sony eh?
So do I change this at start up,?
Option 2?
Any other suggestions. We are looking forward to fixed wireless or starlink?
Leigh -
@hoandco if your internet connection is high latency, wireless, satellite etc.. pfsense since the responses to its ping monitoring are slow - its going to think the gateway is down.
You need to adjust the monitoring of that gateway to reflect your high latency so that pfsense knows the gateway is actually up, if pfsense thinks the gateway is down it will not route traffic over it.
-
@hoandco said in No LAN internet:
How do you suggest I adjust this.
In the gateway config. System > Routing > Gateways. Edit the gateway, look in the advanced config section.
https://docs.netgate.com/pfsense/en/latest/routing/gateway-configure.html#advanced-gateway-settingsSteve
-
@stephenw10
That worked. I set it to 700-900.
Now I still don't have internet on lan PC's.
Is this because there is no upstream gateway added?
Leigh -
It could be. Did you check for a default route like I said above?
Make sure there is a default v4 gateway set.
Edit: I see there was previously a default route set though.
Try to ping, say, 1.1.1.1 from the client. What error is shown?
-
@stephenw10
Latest
default set
Ping from pc connected on lan
$ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=119 time=669 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=119 time=670 mslan rules appear to be working
Thankyou for the help todate I will test 1.1.1.1 from pc later today
-
ping from lan connected
From 192.168.55.1: icmp_seq=33 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=33 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=33 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0) -
Then :
What is the OS ?
And what is the gateway ?Do you have wifi activated and the cable to pfSense connected at the same time ? If so, remove wifi for the moment.
-
@gertjan
Ok will switch other router off
Os is MXlinux -
@gertjan
Did you the ping 1.1.1.1 in terminal on lan connected pc.
It is connected to the pfsense pc through an unmanaged tp link 16 port switch. -
@hoandco said in No LAN internet:
Did you the ping 1.1.1.1 in terminal on lan connected pc.
Why do you ask ?
Half the planet is pinging 1.1.1.1 and 8.8.8.8, and I still don't know why.root@DiskStation2:~# ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. 64 bytes from 1.1.1.1: icmp_seq=1 ttl=51 time=17.2 ms 64 bytes from 1.1.1.1: icmp_seq=2 ttl=51 time=17.3 ms ^C --- 1.1.1.1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 2ms rtt min/avg/max/mdev = 17.161/17.244/17.328/0.155 ms -
@gertjan
Sorry did you see the ping in terminal on pc connected to Lan. -
-
@gertjan
No the 1.1.1.1 ping -
@hoandco
Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0)
From 192.168.55.1: icmp_seq=34 Redirect Host(New nexthop: 0.0.0.0) -
Are you sure that your PC 192.168.55.1 got its DHCP inform from pfSense ?
You didn't change anything on the DHCP server (LAN) page ?
Check the DHCP server log page, do you see your PC doing DHCP request and pfSense DHCP answering ?
Your PC should use 192.168.55.1 for a gateway and DNS.It looks like this
https://serverfault.com/questions/402023/why-do-icmp-redirect-host-happenis happening because pfSense 'thinks' there is another gateway on the LAN 192.168.55.0/24 ....
I never saw that kind of messages ...No "help me" PM's please. Use the forum, the community will thank you.
Edit : and where are the logs ??
