Product idea
-
Yes it would be difficult to make an economic case for one.
I could imagine it making more sense when we have a central control system in place. But it would still be a big step.
There are some switches that can use OpenWRT as a control plane. -
@stephenw10 Ok make sure you get this going asap..
I want say like a 8200 model for routing specs and ports. And then bolted onto that into the same chassis with say 40gig soc from the switch to the routing where the switch as my above wish list, for the price of about $600... I would be all over that ;) heheh
-
@johnpoz said in Product idea:
I would be all over that ;) heheh
Me too hehe, I would definitely buy one.. I would do some extra hours just to buy it.. Crush my little
-
It would however be interesting if the switch in the current 2100/4100 appliances supported POE.
Then, one wouldn't need a separate POE switch.Maybe it's only be, but I imagine, most people don't really need that many POE ports (or many switch ports at all).
-
@rainer_d said in Product idea:
or many switch ports at all
I don't know my sg300-28 is pretty full.. But I agree with you sure wouldn't need 28 poe ports..
I personally don't think a router should have any "switch" ports.. Its a router for gosh sake not a switch ;) But if your going to provide my unicorn switch with my router for a very good price - I wouldn't be too mad about that..
-
@johnpoz said in Product idea:
I personally don't think a router should have any "switch" ports..
You see, I'm using a SG-3100 since it was launched.. I'm so used to the built in switch that I don't think I can live without it anymore..
You see, my desktop PC to the NAS is not using the 2.5Gbps uplink to the SOC..
The trunk (orange), is connected to devices that don't use a lot of bandwidth, TV 100Mbits port, raspberry pi 3b 100Mbits port, Chromecast 100Mbits port and Raspberry pi 4 is 1Gbps port..
But Chromecast 4b is only a syslog/netflow server..AP is connected directly to the SG-3100, thus not using the trunk (orange).
There isn't much traffic from the VLAN10 to VLAN100 and vice versa, only Plex (Direct Play 1080p) and SMB traffic for small files..
Edit: Just received an e-mail from Netgate with a $60 discount for SG-3100 owners to buy a SG-4100.. Man, the timing that I did this post and received this e-mail is insane.. hahahah
-
@mcury said in Product idea:
Man, the timing that I did this post and received this e-mail is insane..
I got that email a few days ago.. On the 27th ;)
-
@johnpoz said in Product idea:
I got that email a few days ago.. On the 27th ;)
Now I don't know what to do.. I'll locate a reseller here in my country to confirm which one can apply this discount when importing it.. I guess I can learn to live without a built in switch ahhahaha, lets see...
Edit: Hmm, it seems that there isn't a guide to install M.2 drive in the SG-4100.. And this would avoid the warranty? :(
Edit2: Based on what I found so far, it seems easy to install a M.2 drive in it.. But I can't find any post where users successfully installed it..
-
@mcury the Max version comes with an m.2. Other models have a guide, the 4100 does not.
New thread? This is pretty far off OP’s question :)
Re: switch, it would be almost impossible to beak into the commodity hardware market without huge volume. Also switches are generally hardware not software based. So there would need to be a unique selling point…
“when we have a central control system”
-
@steveits said in Product idea:
the Max version comes with an m.2. Other models have a guide, the 4100 does not.
Indeed.. That would be my go-to option..
New thread? This is pretty far off OP’s question :)
I'll open a new one, you are correct, but thanks for remembering me about the MAX option.. :)
